/*
LUFA Library
- Copyright (C) Dean Camera, 2013.
+ Copyright (C) Dean Camera, 2018.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
- Copyright 2013 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2018 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
* \attention The value of the \c BitLength parameter should not be set below 10 or invalid bus conditions may
* occur, as indicated in the XMEGA microcontroller datasheet.
*
- * \param[in] twi The TWI Peripheral to use
- * \param[in] Baud Value of the BAUD register of the TWI Master.
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
+ * \param[in] Baud Value of the BAUD register of the TWI Master.
*/
- static inline void TWI_Init(TWI_t *twi, const uint8_t Baud) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
- static inline void TWI_Init(TWI_t *twi, const uint8_t Baud)
+ static inline void TWI_Init(TWI_t* const TWI,
+ const uint8_t Baud) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
+ static inline void TWI_Init(TWI_t* const TWI,
+ const uint8_t Baud)
{
- twi->MASTER.BAUD = Baud;
- twi->MASTER.CTRLA |= TWI_MASTER_ENABLE_bm;
+ TWI->CTRL = 0x00;
+ TWI->MASTER.BAUD = Baud;
+ TWI->MASTER.CTRLA = TWI_MASTER_ENABLE_bm;
+ TWI->MASTER.CTRLB = 0;
+ TWI->MASTER.STATUS = TWI_MASTER_BUSSTATE_IDLE_gc;
}
/** Turns off the TWI driver hardware. If this is called, any further TWI operations will require a call to
* \ref TWI_Init() before the TWI can be used again.
- *
- * \param[in] twi The TWI Peripheral to use
+ *
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
*/
- static inline void TWI_Disable(TWI_t *twi) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
- static inline void TWI_Disable(TWI_t *twi)
+ static inline void TWI_Disable(TWI_t* const TWI) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
+ static inline void TWI_Disable(TWI_t* const TWI)
{
- twi->MASTER.CTRLA &= ~TWI_MASTER_ENABLE_bm;
+ TWI->MASTER.CTRLA &= ~TWI_MASTER_ENABLE_bm;
}
- /** Sends a TWI STOP onto the TWI bus, terminating communication with the currently addressed device.
- *
- * \param[in] twi The TWI Peripheral to use
- */
- static inline void TWI_StopTransmission(TWI_t *twi) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
- static inline void TWI_StopTransmission(TWI_t *twi)
+ /** Sends a TWI STOP onto the TWI bus, terminating communication with the currently addressed device.
+ *
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
+ */
+ static inline void TWI_StopTransmission(TWI_t* const TWI) ATTR_ALWAYS_INLINE ATTR_NON_NULL_PTR_ARG(1);
+ static inline void TWI_StopTransmission(TWI_t* const TWI)
{
- twi->MASTER.CTRLC = TWI_MASTER_CMD_STOP_gc;
+ TWI->MASTER.CTRLC = TWI_MASTER_ACKACT_bm | TWI_MASTER_CMD_STOP_gc;
}
/* Function Prototypes: */
/** Begins a master mode TWI bus communication with the given slave device address.
*
- * \param[in] twi The TWI Peripheral to use
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
* \param[in] SlaveAddress Address of the slave TWI device to communicate with.
* \param[in] TimeoutMS Timeout period within which the slave must respond, in milliseconds.
*
* \return A value from the \ref TWI_ErrorCodes_t enum.
*/
- uint8_t TWI_StartTransmission(TWI_t *twi,
- const uint8_t SlaveAddress,
+ uint8_t TWI_StartTransmission(TWI_t* const TWI,
+ const uint8_t SlaveAddress,
const uint8_t TimeoutMS) ATTR_NON_NULL_PTR_ARG(1);
/** Sends a byte to the currently addressed device on the TWI bus.
*
- * \param[in] twi The TWI Peripheral to use
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
* \param[in] Byte Byte to send to the currently addressed device
*
* \return Boolean \c true if the recipient ACKed the byte, \c false otherwise
*/
- bool TWI_SendByte(TWI_t *twi, const uint8_t Byte) ATTR_NON_NULL_PTR_ARG(1);
+ bool TWI_SendByte(TWI_t* const TWI,
+ const uint8_t Byte) ATTR_NON_NULL_PTR_ARG(1);
/** Receives a byte from the currently addressed device on the TWI bus.
*
- * \param[in] twi The TWI Peripheral to use
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
* \param[in] Byte Location where the read byte is to be stored.
* \param[in] LastByte Indicates if the byte should be ACKed if false, NAKed if true.
*
* \return Boolean \c true if the byte reception successfully completed, \c false otherwise.
*/
- bool TWI_ReceiveByte(TWI_t *twi, uint8_t* const Byte,
- const bool LastByte) ATTR_NON_NULL_PTR_ARG(1, 2);
+ bool TWI_ReceiveByte(TWI_t* const TWI,
+ uint8_t* const Byte,
+ const bool LastByte) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/** High level function to perform a complete packet transfer over the TWI bus to the specified
* device.
*
- * \param[in] twi The TWI Peripheral to use
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
* \param[in] SlaveAddress Base address of the TWI slave device to communicate with.
* \param[in] TimeoutMS Timeout for bus capture and slave START ACK, in milliseconds.
* \param[in] InternalAddress Pointer to a location where the internal slave read start address is stored.
*
* \return A value from the \ref TWI_ErrorCodes_t enum.
*/
- uint8_t TWI_ReadPacket(TWI_t *twi,
- const uint8_t SlaveAddress,
+ uint8_t TWI_ReadPacket(TWI_t* const TWI,
+ const uint8_t SlaveAddress,
const uint8_t TimeoutMS,
const uint8_t* InternalAddress,
uint8_t InternalAddressLen,
uint8_t* Buffer,
- uint8_t Length) ATTR_NON_NULL_PTR_ARG(1, 4);
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(4);
/** High level function to perform a complete packet transfer over the TWI bus from the specified
* device.
*
- * \param[in] twi The TWI Peripheral to use
+ * \param[in] TWI Pointer to the base of the TWI peripheral within the device.
* \param[in] SlaveAddress Base address of the TWI slave device to communicate with
* \param[in] TimeoutMS Timeout for bus capture and slave START ACK, in milliseconds
* \param[in] InternalAddress Pointer to a location where the internal slave write start address is stored
*
* \return A value from the \ref TWI_ErrorCodes_t enum.
*/
- uint8_t TWI_WritePacket(TWI_t *twi,
- const uint8_t SlaveAddress,
+ uint8_t TWI_WritePacket(TWI_t* const TWI,
+ const uint8_t SlaveAddress,
const uint8_t TimeoutMS,
const uint8_t* InternalAddress,
uint8_t InternalAddressLen,
const uint8_t* Buffer,
- uint8_t Length) ATTR_NON_NULL_PTR_ARG(1, 4);
+ uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(4);
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
projects / pub / USBasp.git / blobdiff