-/*\r
- LUFA Library\r
- Copyright (C) Dean Camera, 2010.\r
- \r
- dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
-*/\r
-\r
-/*\r
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, distribute, and sell this \r
- software and its documentation for any purpose is hereby granted\r
- without fee, provided that the above copyright notice appear in \r
- all copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting \r
- documentation, and that the name of the author not be used in \r
- advertising or publicity pertaining to distribution of the \r
- software without specific, written prior permission.\r
-\r
- The author disclaim all warranties with regard to this\r
- software, including all implied warranties of merchantability\r
- and fitness. In no event shall the author be liable for any\r
- special, indirect or consequential damages or any damages\r
- whatsoever resulting from loss of use, data or profits, whether\r
- in an action of contract, negligence or other tortious action,\r
- arising out of or in connection with the use or performance of\r
- this software.\r
-*/\r
-\r
-/** \file\r
- *\r
- * USB Device Descriptors, for library use when in USB device mode. Descriptors are special \r
- * computer-readable structures which the host requests upon device enumeration, to determine\r
- * the device's capabilities and functions. \r
- */\r
-\r
-#include "Descriptors.h"\r
-\r
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as\r
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.\r
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated\r
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices\r
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value\r
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and\r
- * port location).\r
- */\r
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)\r
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.\r
-#endif\r
-\r
-/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall\r
- * device characteristics, including the supported USB version, control endpoint size and the\r
- * number of device configurations. The descriptor is read out by the USB host when the enumeration\r
- * process begins.\r
- */\r
-USB_Descriptor_Device_t PROGMEM DeviceDescriptor =\r
-{\r
- .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},\r
-\r
- .USBSpecification = VERSION_BCD(01.10),\r
- .Class = 0x02,\r
- .SubClass = 0x00,\r
- .Protocol = 0x00,\r
-\r
- .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,\r
-\r
- .VendorID = 0x03EB,\r
- .ProductID = 0x2044,\r
- .ReleaseNumber = 0x0000,\r
-\r
- .ManufacturerStrIndex = 0x01,\r
- .ProductStrIndex = 0x02,\r
- .SerialNumStrIndex = USE_INTERNAL_SERIAL,\r
-\r
- .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS\r
-};\r
-\r
-/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage\r
- * of the device in one of its supported configurations, including information about any device interfaces\r
- * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting\r
- * a configuration so that the host may correctly communicate with the USB device.\r
- */\r
-USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =\r
-{\r
- .Config = \r
- {\r
- .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},\r
-\r
- .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),\r
- .TotalInterfaces = 2,\r
- \r
- .ConfigurationNumber = 1,\r
- .ConfigurationStrIndex = NO_DESCRIPTOR,\r
- \r
- .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),\r
- \r
- .MaxPowerConsumption = USB_CONFIG_POWER_MA(100)\r
- },\r
- \r
- .CDC_CCI_Interface = \r
- {\r
- .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},\r
-\r
- .InterfaceNumber = 0,\r
- .AlternateSetting = 0,\r
- \r
- .TotalEndpoints = 1,\r
- \r
- .Class = 0x02,\r
- .SubClass = 0x02,\r
- .Protocol = 0x01,\r
- \r
- .InterfaceStrIndex = NO_DESCRIPTOR\r
- },\r
-\r
- .CDC_Functional_IntHeader = \r
- {\r
- .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},\r
- .SubType = 0x00,\r
- \r
- .Data = {0x01, 0x10}\r
- },\r
-\r
- .CDC_Functional_AbstractControlManagement = \r
- {\r
- .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(1)), .Type = 0x24},\r
- .SubType = 0x02,\r
- \r
- .Data = {0x06}\r
- },\r
- \r
- .CDC_Functional_Union = \r
- {\r
- .Header = {.Size = sizeof(CDC_FUNCTIONAL_DESCRIPTOR(2)), .Type = 0x24},\r
- .SubType = 0x06,\r
- \r
- .Data = {0x00, 0x01}\r
- },\r
-\r
- .CDC_ManagementEndpoint = \r
- {\r
- .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},\r
- \r
- .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_NOTIFICATION_EPNUM),\r
- .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),\r
- .EndpointSize = CDC_NOTIFICATION_EPSIZE,\r
- .PollingIntervalMS = 0xFF\r
- },\r
-\r
- .CDC_DCI_Interface = \r
- {\r
- .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},\r
-\r
- .InterfaceNumber = 1,\r
- .AlternateSetting = 0,\r
- \r
- .TotalEndpoints = 2,\r
- \r
- .Class = 0x0A,\r
- .SubClass = 0x00,\r
- .Protocol = 0x00,\r
- \r
- .InterfaceStrIndex = NO_DESCRIPTOR\r
- },\r
-\r
- .CDC_DataOutEndpoint = \r
- {\r
- .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},\r
- \r
- .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | CDC_RX_EPNUM),\r
- .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),\r
- .EndpointSize = CDC_TXRX_EPSIZE,\r
- .PollingIntervalMS = 0x00\r
- },\r
- \r
- .CDC_DataInEndpoint = \r
- {\r
- .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},\r
- \r
- .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | CDC_TX_EPNUM),\r
- .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),\r
- .EndpointSize = CDC_TXRX_EPSIZE,\r
- .PollingIntervalMS = 0x00\r
- }\r
-};\r
-\r
-/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests\r
- * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate\r
- * via the language ID table available at USB.org what languages the device supports for its string descriptors.\r
- */\r
-USB_Descriptor_String_t PROGMEM LanguageString =\r
-{\r
- .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},\r
-\r
- .UnicodeString = {LANGUAGE_ID_ENG}\r
-};\r
-\r
-/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable\r
- * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device\r
- * Descriptor.\r
- */\r
-USB_Descriptor_String_t PROGMEM ManufacturerString =\r
-{\r
- .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},\r
-\r
- .UnicodeString = L"Dean Camera"\r
-};\r
-\r
-/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,\r
- * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device\r
- * Descriptor.\r
- */\r
-USB_Descriptor_String_t PROGMEM ProductString =\r
-{\r
- .Header = {.Size = USB_STRING_LEN(12), .Type = DTYPE_String},\r
-\r
- .UnicodeString = L"LED Notifier"\r
-};\r
-\r
-/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"\r
- * documentation) by the application code so that the address and size of a requested descriptor can be given\r
- * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function\r
- * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the\r
- * USB host.\r
- */\r
-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)\r
-{\r
- const uint8_t DescriptorType = (wValue >> 8);\r
- const uint8_t DescriptorNumber = (wValue & 0xFF);\r
-\r
- void* Address = NULL;\r
- uint16_t Size = NO_DESCRIPTOR;\r
-\r
- switch (DescriptorType)\r
- {\r
- case DTYPE_Device:\r
- Address = (void*)&DeviceDescriptor;\r
- Size = sizeof(USB_Descriptor_Device_t);\r
- break;\r
- case DTYPE_Configuration: \r
- Address = (void*)&ConfigurationDescriptor;\r
- Size = sizeof(USB_Descriptor_Configuration_t);\r
- break;\r
- case DTYPE_String: \r
- switch (DescriptorNumber)\r
- {\r
- case 0x00: \r
- Address = (void*)&LanguageString;\r
- Size = pgm_read_byte(&LanguageString.Header.Size);\r
- break;\r
- case 0x01: \r
- Address = (void*)&ManufacturerString;\r
- Size = pgm_read_byte(&ManufacturerString.Header.Size);\r
- break;\r
- case 0x02: \r
- Address = (void*)&ProductString;\r
- Size = pgm_read_byte(&ProductString.Header.Size);\r
- break;\r
- }\r
- \r
- break;\r
- }\r
- \r
- *DescriptorAddress = Address;\r
- return Size;\r
-}\r
+/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2011.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.lufa-lib.org
+*/
+
+/*
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, distribute, and sell this
+ software and its documentation for any purpose is hereby granted
+ without fee, provided that the above copyright notice appear in
+ all copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * USB Device Descriptors, for library use when in USB device mode. Descriptors are special
+ * computer-readable structures which the host requests upon device enumeration, to determine
+ * the device's capabilities and functions.
+ */
+
+#include "Descriptors.h"
+
+/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
+ * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
+ * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
+ * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
+ * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
+ * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
+ * port location).
+ */
+#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
+ #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
+#endif
+
+/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
+ * device characteristics, including the supported USB version, control endpoint size and the
+ * number of device configurations. The descriptor is read out by the USB host when the enumeration
+ * process begins.
+ */
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+{
+ .Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
+
+ .USBSpecification = VERSION_BCD(01.10),
+ .Class = CDC_CSCP_CDCClass,
+ .SubClass = CDC_CSCP_NoSpecificSubclass,
+ .Protocol = CDC_CSCP_NoSpecificProtocol,
+
+ .Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
+
+ .VendorID = 0x03EB,
+ .ProductID = 0x2044,
+ .ReleaseNumber = VERSION_BCD(00.01),
+
+ .ManufacturerStrIndex = 0x01,
+ .ProductStrIndex = 0x02,
+ .SerialNumStrIndex = USE_INTERNAL_SERIAL,
+
+ .NumberOfConfigurations = FIXED_NUM_CONFIGURATIONS
+};
+
+/** Configuration descriptor structure. This descriptor, located in FLASH memory, describes the usage
+ * of the device in one of its supported configurations, including information about any device interfaces
+ * and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
+ * a configuration so that the host may correctly communicate with the USB device.
+ */
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+{
+ .Config =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
+
+ .TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
+ .TotalInterfaces = 2,
+
+ .ConfigurationNumber = 1,
+ .ConfigurationStrIndex = NO_DESCRIPTOR,
+
+ .ConfigAttributes = (USB_CONFIG_ATTR_BUSPOWERED | USB_CONFIG_ATTR_SELFPOWERED),
+
+ .MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
+ },
+
+ .CDC_CCI_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = 0,
+ .AlternateSetting = 0,
+
+ .TotalEndpoints = 1,
+
+ .Class = CDC_CSCP_CDCClass,
+ .SubClass = CDC_CSCP_ACMSubclass,
+ .Protocol = CDC_CSCP_ATCommandProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .CDC_Functional_Header =
+ {
+ .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalHeader_t), .Type = DTYPE_CSInterface},
+ .Subtype = CDC_DSUBTYPE_CSInterface_Header,
+
+ .CDCSpecification = VERSION_BCD(01.10),
+ },
+
+ .CDC_Functional_ACM =
+ {
+ .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalACM_t), .Type = DTYPE_CSInterface},
+ .Subtype = CDC_DSUBTYPE_CSInterface_ACM,
+
+ .Capabilities = 0x06,
+ },
+
+ .CDC_Functional_Union =
+ {
+ .Header = {.Size = sizeof(USB_CDC_Descriptor_FunctionalUnion_t), .Type = DTYPE_CSInterface},
+ .Subtype = CDC_DSUBTYPE_CSInterface_Union,
+
+ .MasterInterfaceNumber = 0,
+ .SlaveInterfaceNumber = 1,
+ },
+
+ .CDC_NotificationEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | CDC_NOTIFICATION_EPNUM),
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_NOTIFICATION_EPSIZE,
+ .PollingIntervalMS = 0xFF
+ },
+
+ .CDC_DCI_Interface =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Interface_t), .Type = DTYPE_Interface},
+
+ .InterfaceNumber = 1,
+ .AlternateSetting = 0,
+
+ .TotalEndpoints = 2,
+
+ .Class = CDC_CSCP_CDCDataClass,
+ .SubClass = CDC_CSCP_NoDataSubclass,
+ .Protocol = CDC_CSCP_NoDataProtocol,
+
+ .InterfaceStrIndex = NO_DESCRIPTOR
+ },
+
+ .CDC_DataOutEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_OUT | CDC_RX_EPNUM),
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_TXRX_EPSIZE,
+ .PollingIntervalMS = 0x01
+ },
+
+ .CDC_DataInEndpoint =
+ {
+ .Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
+
+ .EndpointAddress = (ENDPOINT_DIR_IN | CDC_TX_EPNUM),
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
+ .EndpointSize = CDC_TXRX_EPSIZE,
+ .PollingIntervalMS = 0x01
+ }
+};
+
+/** Language descriptor structure. This descriptor, located in FLASH memory, is returned when the host requests
+ * the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
+ * via the language ID table available at USB.org what languages the device supports for its string descriptors.
+ */
+const USB_Descriptor_String_t PROGMEM LanguageString =
+{
+ .Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
+
+ .UnicodeString = {LANGUAGE_ID_ENG}
+};
+
+/** Manufacturer descriptor string. This is a Unicode string containing the manufacturer's details in human readable
+ * form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ * Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ManufacturerString =
+{
+ .Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
+
+ .UnicodeString = L"Dean Camera"
+};
+
+/** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
+ * and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
+ * Descriptor.
+ */
+const USB_Descriptor_String_t PROGMEM ProductString =
+{
+ .Header = {.Size = USB_STRING_LEN(12), .Type = DTYPE_String},
+
+ .UnicodeString = L"LED Notifier"
+};
+
+/** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
+ * documentation) by the application code so that the address and size of a requested descriptor can be given
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
+ * is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
+ * USB host.
+ */
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+ const uint8_t wIndex,
+ const void** const DescriptorAddress)
+{
+ const uint8_t DescriptorType = (wValue >> 8);
+ const uint8_t DescriptorNumber = (wValue & 0xFF);
+
+ const void* Address = NULL;
+ uint16_t Size = NO_DESCRIPTOR;
+
+ switch (DescriptorType)
+ {
+ case DTYPE_Device:
+ Address = &DeviceDescriptor;
+ Size = sizeof(USB_Descriptor_Device_t);
+ break;
+ case DTYPE_Configuration:
+ Address = &ConfigurationDescriptor;
+ Size = sizeof(USB_Descriptor_Configuration_t);
+ break;
+ case DTYPE_String:
+ switch (DescriptorNumber)
+ {
+ case 0x00:
+ Address = &LanguageString;
+ Size = pgm_read_byte(&LanguageString.Header.Size);
+ break;
+ case 0x01:
+ Address = &ManufacturerString;
+ Size = pgm_read_byte(&ManufacturerString.Header.Size);
+ break;
+ case 0x02:
+ Address = &ProductString;
+ Size = pgm_read_byte(&ProductString.Header.Size);
+ break;
+ }
+
+ break;
+ }
+
+ *DescriptorAddress = Address;
+ return Size;
+}
+
projects / pub / USBasp.git / blobdiff