Add extra LUFA TAR archive export exclusions.

[pub/USBasp.git] / Projects / XPLAINBridge / XPLAINBridge.c

diff --git a/Projects/XPLAINBridge/XPLAINBridge.c b/Projects/XPLAINBridge/XPLAINBridge.c
index ce23862..bee770a 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.c
+++ b/Projects/XPLAINBridge/XPLAINBridge.c
@@ -1,21 +1,21 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2010.
-              
+     Copyright (C) Dean Camera, 2012.
+

   dean [at] fourwalledcubicle [dot] com
   dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com
+           www.lufa-lib.org

 */
 
 /*
 */
 
 /*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
 

-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this

   software and its documentation for any purpose is hereby granted
   software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in

   all copies and that both that the copyright notice and this
   all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the

   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this


@@ -31,13 +31,13 @@
 /** \file
  *
  *  Main source file for the XPLAINBridge project. This file contains the main tasks of
 /** \file
  *
  *  Main source file for the XPLAINBridge project. This file contains the main tasks of

- *  the demo and is responsible for the initial application hardware configuration.
+ *  the project and is responsible for the initial application hardware configuration.

  */
 
 #include "XPLAINBridge.h"
 
  */
 
 #include "XPLAINBridge.h"
 

-/* Current firmware mode, making the device behave as either a programmer or a USART bridge */
-bool CurrentFirmwareMode = MODE_PDI_PROGRAMMER;
+/** Current firmware mode, making the device behave as either a programmer or a USART bridge */
+bool CurrentFirmwareMode = MODE_USART_BRIDGE;

 
 /** LUFA CDC Class driver interface configuration and state information. This structure is
  *  passed to all CDC Class driver functions, so that multiple instances of the same class
 
 /** LUFA CDC Class driver interface configuration and state information. This structure is
  *  passed to all CDC Class driver functions, so that multiple instances of the same class


@@ -45,7 +45,7 @@ bool CurrentFirmwareMode = MODE_PDI_PROGRAMMER;
  */
 USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
        {
  */
 USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
        {

-               .Config = 
+               .Config =

                        {
                                .ControlInterfaceNumber         = 0,
 
                        {
                                .ControlInterfaceNumber         = 0,
 


@@ -64,10 +64,16 @@ USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
        };
 
 /** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
        };
 
 /** Circular buffer to hold data from the host before it is sent to the device via the serial port. */

-RingBuff_t USBtoUART_Buffer;
+RingBuffer_t   USBtoUART_Buffer;
+
+/** Underlying data buffer for \ref USBtoUART_Buffer, where the stored bytes are located. */
+static uint8_t USBtoUART_Buffer_Data[128];

 
 /** Circular buffer to hold data from the serial port before it is sent to the host. */
 
 /** Circular buffer to hold data from the serial port before it is sent to the host. */

-RingBuff_t UARTtoUSB_Buffer;
+RingBuffer_t   UARTtoUSB_Buffer;
+
+/** Underlying data buffer for \ref UARTtoUSB_Buffer, where the stored bytes are located. */
+static uint8_t UARTtoUSB_Buffer_Data[128];

 
 
 /** Main program entry point. This routine contains the overall program flow, including initial
 
 
 /** Main program entry point. This routine contains the overall program flow, including initial


@@ -76,19 +82,14 @@ RingBuff_t UARTtoUSB_Buffer;
 int main(void)
 {
        SetupHardware();
 int main(void)
 {
        SetupHardware();

-       
-       USBtoUART_Buffer.In  = USBtoUART_Buffer.Buffer;
-       USBtoUART_Buffer.Out = USBtoUART_Buffer.Buffer;
-       UARTtoUSB_Buffer.In  = UARTtoUSB_Buffer.Buffer;
-       UARTtoUSB_Buffer.Out = UARTtoUSB_Buffer.Buffer;
-       
+

        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
        sei();
 
        for (;;)
        {
                if (CurrentFirmwareMode == MODE_USART_BRIDGE)
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
        sei();
 
        for (;;)
        {
                if (CurrentFirmwareMode == MODE_USART_BRIDGE)

-                 USARTBridge_Task();
+                 UARTBridge_Task();

                else
                  AVRISP_Task();
 
                else
                  AVRISP_Task();
 


@@ -102,8 +103,10 @@ void AVRISP_Task(void)
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;
 
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;
 

+       V2Params_UpdateParamValues();
+

        Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);
        Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);

-       
+

        /* Check to see if a V2 Protocol command has been received */
        if (Endpoint_IsOUTReceived())
        {
        /* Check to see if a V2 Protocol command has been received */
        if (Endpoint_IsOUTReceived())
        {


@@ -116,43 +119,42 @@ void AVRISP_Task(void)
        }
 }
 
        }
 }
 

-void USARTBridge_Task(void)
+void UARTBridge_Task(void)

 {
        /* Must be in the configured state for the USART Bridge code to process data */
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;
 
 {
        /* Must be in the configured state for the USART Bridge code to process data */
        if (USB_DeviceState != DEVICE_STATE_Configured)
          return;
 

-       /* Read bytes from the USB OUT endpoint into the UART transmit buffer */
-       for (uint8_t DataBytesRem = CDC_Device_BytesReceived(&VirtualSerial_CDC_Interface); DataBytesRem != 0; DataBytesRem--)
+       /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */
+       if (!(RingBuffer_IsFull(&USBtoUART_Buffer)))

        {
        {

-               *USBtoUART_Buffer.In = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+               int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);

 
 

-               if (++USBtoUART_Buffer.In == &USBtoUART_Buffer.Buffer[128])
-                 USBtoUART_Buffer.In = USBtoUART_Buffer.Buffer;
-       }
-       
-       /* Read bytes from the UART receive buffer into the USB IN endpoint */
-       if (UARTtoUSB_Buffer.In != UARTtoUSB_Buffer.Out)
-       {
-               CDC_Device_SendByte(&VirtualSerial_CDC_Interface, *UARTtoUSB_Buffer.Out);
-               if (++UARTtoUSB_Buffer.Out == &UARTtoUSB_Buffer.Buffer[128])
-                 UARTtoUSB_Buffer.Out = UARTtoUSB_Buffer.Buffer;
-       }
-       
-       /* Load bytes from the UART transmit buffer into the UART */
-       if ((USBtoUART_Buffer.In != USBtoUART_Buffer.Out) && SoftUART_IsReady())
-       {
-               SoftUART_TxByte(*USBtoUART_Buffer.Out);
-               if (++USBtoUART_Buffer.Out == &USBtoUART_Buffer.Buffer[128])
-                 USBtoUART_Buffer.Out = USBtoUART_Buffer.Buffer;
+               /* Read bytes from the USB OUT endpoint into the UART transmit buffer */
+               if (!(ReceivedByte < 0))
+                 RingBuffer_Insert(&USBtoUART_Buffer, ReceivedByte);

        }
        }

-       
-       /* Load bytes from the UART into the UART receive buffer */
-       if (SoftUART_IsReceived())
+
+       /* Check if the UART receive buffer flush timer has expired or buffer is nearly full */
+       uint16_t BufferCount = RingBuffer_GetCount(&UARTtoUSB_Buffer);
+       if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))

        {
        {

-               *UARTtoUSB_Buffer.In = SoftUART_RxByte();
-               if (++UARTtoUSB_Buffer.In == &UARTtoUSB_Buffer.Buffer[128])
-                 UARTtoUSB_Buffer.In = UARTtoUSB_Buffer.Buffer;                
+               /* Clear flush timer expiry flag */
+               TIFR0 |= (1 << TOV0);
+
+               /* Read bytes from the USART receive buffer into the USB IN endpoint */
+               while (BufferCount--)
+               {
+                       /* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
+                       if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
+                                                                       RingBuffer_Peek(&UARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
+                       {
+                               break;
+                       }
+
+                       /* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
+                       RingBuffer_Remove(&UARTtoUSB_Buffer);
+               }

        }
 
        CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
        }
 
        CDC_Device_USBTask(&VirtualSerial_CDC_Interface);


@@ -172,18 +174,17 @@ void SetupHardware(void)
        SoftUART_Init();
        LEDs_Init();
        USB_Init();
        SoftUART_Init();
        LEDs_Init();
        USB_Init();

-       V2Protocol_Init();
-       
+

        /* Disable JTAG debugging */
        MCUCR |= (1 << JTD);
        MCUCR |= (1 << JTD);
 
        /* Disable JTAG debugging */
        MCUCR |= (1 << JTD);
        MCUCR |= (1 << JTD);
 

-       /* Enable pullup on the JTAG TDI pin so we can use it to select the mode */
+       /* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */

        PORTF |= (1 << 7);
        PORTF |= (1 << 7);

-       _delay_ms(10);
+       Delay_MS(10);

 
        /* Select the firmware mode based on the JTD pin's value */
 
        /* Select the firmware mode based on the JTD pin's value */

-       CurrentFirmwareMode = MODE_USART_BRIDGE; // TEMP (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER;
+       CurrentFirmwareMode = (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER;

 
        /* Re-enable JTAG debugging */
        MCUCR &= ~(1 << JTD);
 
        /* Re-enable JTAG debugging */
        MCUCR &= ~(1 << JTD);


@@ -193,34 +194,42 @@ void SetupHardware(void)
 /** Event handler for the library USB Configuration Changed event. */
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
 /** Event handler for the library USB Configuration Changed event. */
 void EVENT_USB_Device_ConfigurationChanged(void)
 {

-       bool EndpointConfigSuccess = true;
+       bool ConfigSuccess = true;

 
        /* Configure the device endpoints according to the selected mode */
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)
        {
 
        /* Configure the device endpoints according to the selected mode */
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)
        {

-               EndpointConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+               ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+
+               /* Configure the UART flush timer - run at Fcpu/1024 for maximum interval before overflow */
+               TCCR0B = ((1 << CS02) | (1 << CS00));
+
+               /* Initialize ring buffers used to hold serial data between USB and software UART interfaces */
+               RingBuffer_InitBuffer(&USBtoUART_Buffer, USBtoUART_Buffer_Data, sizeof(USBtoUART_Buffer_Data));
+               RingBuffer_InitBuffer(&UARTtoUSB_Buffer, UARTtoUSB_Buffer_Data, sizeof(UARTtoUSB_Buffer_Data));
+
+               /* Start the software USART */
+               SoftUART_Init();

        }
        else
        {
        }
        else
        {

-               EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK,
-                                                                                                   ENDPOINT_DIR_OUT, AVRISP_DATA_EPSIZE,
-                                                                                                   ENDPOINT_BANK_SINGLE);
+               ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
+                                                           AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);

 
                #if defined(LIBUSB_DRIVER_COMPAT)
 
                #if defined(LIBUSB_DRIVER_COMPAT)

-               EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK,
-                                                                   ENDPOINT_DIR_IN, AVRISP_DATA_EPSIZE,
-                                                                   ENDPOINT_BANK_SINGLE);
+               ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
+                                                           AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);

                #endif
                #endif

+
+               /* Configure the V2 protocol packet handler */
+               V2Protocol_Init();

        }
 
        }
 

-       if (EndpointConfigSuccess)
-         LEDs_SetAllLEDs(LEDMASK_USB_READY);
-       else
-         LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+       LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);

 }
 
 }
 

-/** Event handler for the library USB Unhandled Control Request event. */
-void EVENT_USB_Device_UnhandledControlRequest(void)
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)

 {
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)
          CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
 {
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)
          CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);


@@ -238,13 +247,31 @@ void EVENT_USB_Device_Disconnect(void)
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 }
 
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
 }
 

+/** Event handler for the CDC Class driver Line Encoding Changed event.
+ *
+ *  \param[in] CDCInterfaceInfo  Pointer to the CDC class interface configuration structure being referenced
+ */
+void EVENT_CDC_Device_LineEncodingChanged(USB_ClassInfo_CDC_Device_t* const CDCInterfaceInfo)
+{
+       /* Change the software UART's baud rate to match the new baud rate */
+       SoftUART_SetBaud(CDCInterfaceInfo->State.LineEncoding.BaudRateBPS);
+}
+

 /** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
  *  documentation) by the application code so that the address and size of a requested descriptor can be given
  *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
  *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
  *  USB host.
 /** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
  *  documentation) by the application code so that the address and size of a requested descriptor can be given
  *  to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
  *  is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
  *  USB host.

+ *
+ *  \param[in]  wValue  Descriptor type and index to retrieve
+ *  \param[in]  wIndex  Sub-index to retrieve (such as a localized string language)
+ *  \param[out] DescriptorAddress  Address of the retrieved descriptor
+ *
+ *  \return Length of the retrieved descriptor in bytes, or NO_DESCRIPTOR if the descriptor was not found

  */
  */

-uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)
+uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
+                                    const uint8_t wIndex,
+                                    const void** const DescriptorAddress)

 {
        /* Return the correct descriptors based on the selected mode */
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)
 {
        /* Return the correct descriptors based on the selected mode */
        if (CurrentFirmwareMode == MODE_USART_BRIDGE)


@@ -252,3 +279,4 @@ uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex,
        else
          return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress);
 }
        else
          return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress);
 }

+