# make program = Download the hex file to the device, using avrdude.\r
# Please customize the avrdude settings below first!\r
#\r
-# make dfu = Download the hex file to the device, using dfu-programmer (must\r
-# have dfu-programmer installed).\r
-#\r
-# make flip = Download the hex file to the device, using Atmel FLIP (must\r
-# have Atmel FLIP installed).\r
-#\r
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer\r
-# (must have dfu-programmer installed).\r
-#\r
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP\r
-# (must have Atmel FLIP installed).\r
-#\r
# make doxygen = Generate DoxyGen documentation for the project (must have\r
# DoxyGen installed)\r
#\r
MCU = at90usb1287\r
\r
\r
-# Target board (see library BoardTypes.h documentation, USER or blank for projects not requiring\r
+# Target board (see library "Board Types" documentation, USER or blank for projects not requiring\r
# LUFA board drivers). If USER is selected, put custom board drivers in a directory called \r
# "Board" inside the application directory.\r
-BOARD = USBKEY\r
+BOARD = USBKEY\r
\r
\r
# Processor frequency.\r
#\r
# If no clock division is performed on the input clock inside the AVR (via the\r
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.\r
-F_CLOCK = 8000000\r
+F_CLOCK = $(F_CPU)\r
+\r
+\r
+# Starting byte address of the bootloader\r
+BOOT_START = 0x1E000\r
\r
\r
# Output format. (can be srec, ihex, binary)\r
OBJDIR = .\r
\r
\r
+# Path to the LUFA library\r
+LUFA_PATH = ../..\r
+\r
+\r
+# LUFA library compile-time options\r
+LUFA_OPTS = -D USB_DEVICE_ONLY\r
+LUFA_OPTS += -D USE_NONSTANDARD_DESCRIPTOR_NAMES\r
+LUFA_OPTS += -D CONTROL_ONLY_DEVICE\r
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=32\r
+LUFA_OPTS += -D TOTAL_NUM_CONFIGURATIONS=1\r
+LUFA_OPTS += -D USE_RAM_DESCRIPTORS\r
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
+LUFA_OPTS += -D NO_INTERNAL_SERIAL\r
+\r
+\r
# List C source files here. (C dependencies are automatically generated.)\r
-SRC = $(TARGET).c \\r
- Descriptors.c \\r
- ../../LUFA/Drivers/USB/LowLevel/LowLevel.c \\r
- ../../LUFA/Drivers/USB/LowLevel/Endpoint.c \\r
- ../../LUFA/Drivers/USB/LowLevel/DevChapter9.c \\r
- ../../LUFA/Drivers/USB/HighLevel/USBTask.c \\r
- ../../LUFA/Drivers/USB/HighLevel/USBInterrupt.c \\r
- ../../LUFA/Drivers/USB/HighLevel/Events.c \\r
- ../../LUFA/Drivers/USB/HighLevel/StdDescriptors.c \\r
- \r
+SRC = $(TARGET).c \\r
+ Descriptors.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBInterrupt.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \\r
+ $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \\r
+\r
+ \r
# List C++ source files here. (C dependencies are automatically generated.)\r
CPPSRC = \r
\r
# Each directory must be seperated by a space.\r
# Use forward slashes for directory separators.\r
# For a directory that has spaces, enclose it in quotes.\r
-EXTRAINCDIRS = ../../\r
+EXTRAINCDIRS = $(LUFA_PATH)/\r
\r
\r
# Compiler flag to set the C Standard level.\r
CSTANDARD = -std=gnu99\r
\r
\r
-# Starting byte address of the bootloader\r
-BOOT_START = 0x1E000\r
-\r
-\r
# Place -D or -U options here for C sources\r
-CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)\r
-CDEFS += -DUSB_DEVICE_ONLY -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DNO_CLEARSET_FEATURE_REQUEST\r
-CDEFS += -DSTATIC_ENDPOINT_CONFIGURATION -DFIXED_CONTROL_ENDPOINT_SIZE=32\r
-CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"\r
-CDEFS += -DUSE_RAM_DESCRIPTORS -DBOOT_START_ADDR=$(BOOT_START)UL -DUSE_SINGLE_DEVICE_CONFIGURATION\r
+CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)\r
+CDEFS += -DBOOT_START_ADDR=$(BOOT_START)UL\r
\r
\r
# Place -D or -U options here for ASM sources\r
CFLAGS += -fpack-struct\r
CFLAGS += -fshort-enums\r
CFLAGS += -fno-inline-small-functions\r
-CFLAGS += -fno-reorder-blocks\r
-CFLAGS += -fno-reorder-blocks-and-partition\r
-CFLAGS += -fno-reorder-functions\r
-CFLAGS += -fno-toplevel-reorder\r
CFLAGS += -Wall\r
CFLAGS += -Wstrict-prototypes\r
CFLAGS += -Wundef\r
\r
\r
# Default target.\r
-all: begin gccversion sizebefore build checkhooks checklibmode sizeafter end\r
+all: begin gccversion sizebefore build checkhooks checklibmode checkboard sizeafter end\r
\r
# Change the build target to build a HEX file or a library.\r
build: elf hex eep lss sym\r
checkhooks: build\r
@echo\r
@echo ------- Unhooked LUFA Events -------\r
- @$(shell) (grep -s '^Event.*LUFA/.*\\.o' $(TARGET).map | \\r
+ @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \\r
cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \\r
echo "(None)"\r
- @echo ----- End Unhooked LUFA Events -----\r
- \r
+ @echo ------------------------------------\r
+\r
checklibmode:\r
@echo\r
@echo ----------- Library Mode -----------\r
|| echo "No specific mode (both device and host mode allowable)."\r
@echo ------------------------------------\r
\r
+checkboard:\r
+ @echo\r
+ @echo ---------- Selected Board ----------\r
+ @echo Selected board model is $(BOARD).\r
+ @echo ------------------------------------\r
+ \r
# Display compiler version information.\r
gccversion : \r
@$(CC) --version\r
program: $(TARGET).hex $(TARGET).eep\r
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)\r
\r
-flip: $(TARGET).hex\r
- batchisp -hardware usb -device $(MCU) -operation erase f\r
- batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program\r
- batchisp -hardware usb -device $(MCU) -operation start reset 0\r
-\r
-dfu: $(TARGET).hex\r
- dfu-programmer $(MCU) erase\r
- dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex\r
- dfu-programmer $(MCU) reset\r
-\r
-flip-ee: $(TARGET).hex $(TARGET).eep\r
- copy $(TARGET).eep $(TARGET)eep.hex\r
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase\r
- batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program\r
- batchisp -hardware usb -device $(MCU) -operation start reset 0\r
-\r
-dfu-ee: $(TARGET).hex $(TARGET).eep\r
- dfu-programmer $(MCU) erase\r
- dfu-programmer $(MCU) eeprom --debug 1 $(TARGET).eep\r
- dfu-programmer $(MCU) reset\r
\r
# Generate avr-gdb config/init file which does the following:\r
# define the reset signal, load the target file, connect to target, and set \r
\r
clean_binary:\r
$(REMOVE) $(TARGET).hex\r
-\r
+ \r
clean_list:\r
@echo $(MSG_CLEANING)\r
$(REMOVE) $(TARGET).eep\r
+ $(REMOVE) $(TARGET)eep.hex\r
$(REMOVE) $(TARGET).cof\r
$(REMOVE) $(TARGET).elf\r
$(REMOVE) $(TARGET).map\r
$(REMOVE) $(TARGET).lss\r
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)\r
$(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)\r
- $(REMOVE) $(ASRC:%.S=$(OBJDIR)/%.o)\r
- $(REMOVE) $(ASRC:%.S=$(OBJDIR)/%.lst)\r
$(REMOVE) $(SRC:.c=.s)\r
$(REMOVE) $(SRC:.c=.d)\r
$(REMOVE) $(SRC:.c=.i)\r
@echo Generating Project Documentation...\r
@doxygen Doxygen.conf\r
@echo Documentation Generation Complete.\r
- \r
+\r
clean_doxygen:\r
rm -rf Documentation\r
\r
\r
\r
# Listing of phony targets.\r
-.PHONY : all checkhooks checklibmode begin \\r
-finish end sizebefore sizeafter gccversion \\r
-build elf hex eep lss sym coff extcoff \\r
-clean clean_list clean_binary program debug \\r
-gdb-config doxygen clean_doxygen\r
+.PHONY : all checkhooks checklibmode checkboard \\r
+begin finish end sizebefore sizeafter gccversion \\r
+build elf hex eep lss sym coff extcoff clean \\r
+clean_list clean_binary program debug gdb-config \\r
+doxygen
\ No newline at end of file
projects / pub / USBasp.git / blobdiff