/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
-
+ Copyright (C) Dean Camera, 2012.
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
/** \file
*
* Main source file for the XPLAINBridge project. This file contains the main tasks of
- * the demo and is responsible for the initial application hardware configuration.
+ * the project and is responsible for the initial application hardware configuration.
*/
#include "XPLAINBridge.h"
-/* Current firmware mode, making the device behave as either a programmer or a USART bridge */
-bool CurrentFirmwareMode = MODE_PDI_PROGRAMMER;
+/** Current firmware mode, making the device behave as either a programmer or a USART bridge */
+bool CurrentFirmwareMode = MODE_USART_BRIDGE;
/** LUFA CDC Class driver interface configuration and state information. This structure is
* passed to all CDC Class driver functions, so that multiple instances of the same class
*/
USB_ClassInfo_CDC_Device_t VirtualSerial_CDC_Interface =
{
- .Config =
+ .Config =
{
.ControlInterfaceNumber = 0,
};
/** Circular buffer to hold data from the host before it is sent to the device via the serial port. */
-RingBuff_t USBtoUART_Buffer;
+RingBuffer_t USBtoUART_Buffer;
+
+/** Underlying data buffer for \ref USBtoUART_Buffer, where the stored bytes are located. */
+static uint8_t USBtoUART_Buffer_Data[128];
/** Circular buffer to hold data from the serial port before it is sent to the host. */
-RingBuff_t UARTtoUSB_Buffer;
+RingBuffer_t UARTtoUSB_Buffer;
+
+/** Underlying data buffer for \ref UARTtoUSB_Buffer, where the stored bytes are located. */
+static uint8_t UARTtoUSB_Buffer_Data[128];
/** Main program entry point. This routine contains the overall program flow, including initial
V2Params_UpdateParamValues();
Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);
-
+
/* Check to see if a V2 Protocol command has been received */
if (Endpoint_IsOUTReceived())
{
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
- /* Read bytes from the USB OUT endpoint into the UART transmit buffer */
- int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
- if (!(ReceivedByte < 0) && !(RingBuffer_IsFull(&USBtoUART_Buffer)))
- RingBuffer_AtomicInsert(&USBtoUART_Buffer, CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface));
-
- /* Check if the UART receive buffer flush timer has expired */
- if (TIFR0 & (1 << TOV0))
+ /* Only try to read in bytes from the CDC interface if the transmit buffer is not full */
+ if (!(RingBuffer_IsFull(&USBtoUART_Buffer)))
+ {
+ int16_t ReceivedByte = CDC_Device_ReceiveByte(&VirtualSerial_CDC_Interface);
+
+ /* Read bytes from the USB OUT endpoint into the UART transmit buffer */
+ if (!(ReceivedByte < 0))
+ RingBuffer_Insert(&USBtoUART_Buffer, ReceivedByte);
+ }
+
+ /* Check if the UART receive buffer flush timer has expired or buffer is nearly full */
+ uint16_t BufferCount = RingBuffer_GetCount(&UARTtoUSB_Buffer);
+ if ((TIFR0 & (1 << TOV0)) || (BufferCount > 200))
{
+ /* Clear flush timer expiry flag */
TIFR0 |= (1 << TOV0);
- /* Read bytes from the UART receive buffer into the USB IN endpoint */
- while (UARTtoUSB_Buffer.Count)
- CDC_Device_SendByte(&VirtualSerial_CDC_Interface, RingBuffer_AtomicRemove(&UARTtoUSB_Buffer));
+ /* Read bytes from the USART receive buffer into the USB IN endpoint */
+ while (BufferCount--)
+ {
+ /* Try to send the next byte of data to the host, abort if there is an error without dequeuing */
+ if (CDC_Device_SendByte(&VirtualSerial_CDC_Interface,
+ RingBuffer_Peek(&UARTtoUSB_Buffer)) != ENDPOINT_READYWAIT_NoError)
+ {
+ break;
+ }
+
+ /* Dequeue the already sent byte from the buffer now we have confirmed that no transmission error occurred */
+ RingBuffer_Remove(&UARTtoUSB_Buffer);
+ }
}
CDC_Device_USBTask(&VirtualSerial_CDC_Interface);
/* Enable pull-up on the JTAG TDI pin so we can use it to select the mode */
PORTF |= (1 << 7);
- _delay_ms(10);
+ Delay_MS(10);
/* Select the firmware mode based on the JTD pin's value */
CurrentFirmwareMode = (PINF & (1 << 7)) ? MODE_USART_BRIDGE : MODE_PDI_PROGRAMMER;
/** Event handler for the library USB Configuration Changed event. */
void EVENT_USB_Device_ConfigurationChanged(void)
{
- bool EndpointConfigSuccess = true;
+ bool ConfigSuccess = true;
/* Configure the device endpoints according to the selected mode */
if (CurrentFirmwareMode == MODE_USART_BRIDGE)
{
- EndpointConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
+ ConfigSuccess &= CDC_Device_ConfigureEndpoints(&VirtualSerial_CDC_Interface);
/* Configure the UART flush timer - run at Fcpu/1024 for maximum interval before overflow */
TCCR0B = ((1 << CS02) | (1 << CS00));
/* Initialize ring buffers used to hold serial data between USB and software UART interfaces */
- RingBuffer_InitBuffer(&USBtoUART_Buffer);
- RingBuffer_InitBuffer(&UARTtoUSB_Buffer);
+ RingBuffer_InitBuffer(&USBtoUART_Buffer, USBtoUART_Buffer_Data, sizeof(USBtoUART_Buffer_Data));
+ RingBuffer_InitBuffer(&UARTtoUSB_Buffer, UARTtoUSB_Buffer_Data, sizeof(UARTtoUSB_Buffer_Data));
+
+ /* Start the software USART */
+ SoftUART_Init();
}
else
{
- EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK,
- ENDPOINT_DIR_OUT, AVRISP_DATA_EPSIZE,
- ENDPOINT_BANK_SINGLE);
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,
+ AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);
#if defined(LIBUSB_DRIVER_COMPAT)
- EndpointConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK,
- ENDPOINT_DIR_IN, AVRISP_DATA_EPSIZE,
- ENDPOINT_BANK_SINGLE);
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,
+ AVRISP_DATA_EPSIZE, ENDPOINT_BANK_SINGLE);
#endif
-
+
/* Configure the V2 protocol packet handler */
V2Protocol_Init();
}
- if (EndpointConfigSuccess)
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- else
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);
}
-/** Event handler for the library USB Unhandled Control Request event. */
-void EVENT_USB_Device_UnhandledControlRequest(void)
+/** Event handler for the library USB Control Request reception event. */
+void EVENT_USB_Device_ControlRequest(void)
{
if (CurrentFirmwareMode == MODE_USART_BRIDGE)
CDC_Device_ProcessControlRequest(&VirtualSerial_CDC_Interface);
*/
uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
const uint8_t wIndex,
- void** const DescriptorAddress)
+ const void** const DescriptorAddress)
{
/* Return the correct descriptors based on the selected mode */
if (CurrentFirmwareMode == MODE_USART_BRIDGE)
else
return AVRISP_GetDescriptor(wValue, wIndex, DescriptorAddress);
}
+
projects / pub / USBasp.git / blobdiff