/** Endpoint number mask, for masking against endpoint addresses to retrieve the endpoint's\r
* numerical address in the device.\r
*/\r
- #define ENDPOINT_EPNUM_MASK 0x03\r
+ #define ENDPOINT_EPNUM_MASK 0x07\r
\r
/** Endpoint bank size mask, for masking against endpoint addresses to retrieve the endpoint's\r
* bank size in the device.\r
#define ENDPOINT_DOUBLEBANK_SUPPORTED(n) _ENDPOINT_GET_DOUBLEBANK(n)\r
\r
#if !defined(CONTROL_ONLY_DEVICE)\r
- #if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)\r
+ #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)\r
/** Total number of endpoints (including the default control endpoint at address 0) which may\r
* be used in the device. Different USB AVR models support different amounts of endpoints,\r
* this value reflects the maximum number of endpoints for the currently selected AVR model.\r
#else\r
#define ENDPOINT_TOTAL_ENDPOINTS 1\r
#endif\r
-\r
- /** Interrupt definition for the endpoint SETUP interrupt (for CONTROL type endpoints). Should be\r
- * used with the USB_INT_* macros located in USBInterrupt.h.\r
- *\r
- * This interrupt will fire if enabled on a CONTROL type endpoint if a new control packet is\r
- * received from the host.\r
- *\r
- * \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the\r
- * endpoint is selected), and will fire the common endpoint interrupt vector.\r
- *\r
- * \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.\r
- */\r
- #define ENDPOINT_INT_SETUP UEIENX, (1 << RXSTPE), UEINTX, (1 << RXSTPI)\r
\r
/* Pseudo-Function Macros: */\r
#if defined(__DOXYGEN__)\r
*/\r
static inline uint8_t Endpoint_GetEndpointDirection(void);\r
#else\r
- #if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)\r
+ #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)\r
#define Endpoint_BytesInEndpoint() UEBCX\r
#else\r
#define Endpoint_BytesInEndpoint() UEBCLX\r
/* Function Prototypes: */\r
/** Configures the specified endpoint number with the given endpoint type, direction, bank size\r
* and banking mode. Endpoints should be allocated in ascending order by their address in the\r
- * device (i.e. endpoint 1 should be configured before endpoint 2 and so on).\r
+ * device (i.e. endpoint 1 should be configured before endpoint 2 and so on) to prevent fragmentation\r
+ * of the USB FIFO memory.\r
*\r
* The endpoint type may be one of the EP_TYPE_* macros listed in LowLevel.h and the direction\r
* may be either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN.\r
*\r
* The banking mode may be either \ref ENDPOINT_BANK_SINGLE or \ref ENDPOINT_BANK_DOUBLE.\r
*\r
- * The success of this routine can be determined via the \ref Endpoint_IsConfigured() macro.\r
+ * \note The default control endpoint does not have to be manually configured, as it is automatically\r
+ * configured by the library internally.\r
*\r
* \note This routine will select the specified endpoint, and the endpoint will remain selected\r
* once the routine completes regardless of if the endpoint configuration succeeds.\r
* each USB packet, the given stream callback function is executed repeatedly until the next\r
* packet is ready, allowing for early aborts of stream transfers.\r
*\r
- * The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token\r
- * NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled\r
- * and this function has the Callback parameter omitted.\r
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.\r
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are\r
+ * disabled and this function has the Callback parameter omitted.\r
*\r
* \note This routine should not be used on CONTROL type endpoints.\r
*\r
*/\r
uint8_t Endpoint_Discard_Stream(uint16_t Length\r
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)\r
- , uint8_t (* const Callback)(void)\r
+ , StreamCallbackPtr_t Callback\r
#endif\r
);\r
\r
* is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early\r
* aborts of stream transfers.\r
*\r
- * The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token\r
- * NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled\r
- * and this function has the Callback parameter omitted.\r
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.\r
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are\r
+ * disabled and this function has the Callback parameter omitted.\r
*\r
* \note This routine should not be used on CONTROL type endpoints.\r
*\r
*/\r
uint8_t Endpoint_Write_Stream_LE(const void* Buffer, uint16_t Length\r
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)\r
- , uint8_t (* const Callback)(void)\r
+ , StreamCallbackPtr_t Callback\r
#endif\r
) ATTR_NON_NULL_PTR_ARG(1);\r
\r
* is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early\r
* aborts of stream transfers.\r
*\r
- * The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token\r
- * NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled\r
- * and this function has the Callback parameter omitted.\r
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.\r
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are\r
+ * disabled and this function has the Callback parameter omitted.\r
*\r
* \note This routine should not be used on CONTROL type endpoints.\r
*\r
*/\r
uint8_t Endpoint_Write_Stream_BE(const void* Buffer, uint16_t Length\r
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)\r
- , uint8_t (* const Callback)(void)\r
+ , StreamCallbackPtr_t Callback\r
#endif\r
) ATTR_NON_NULL_PTR_ARG(1);\r
\r
* each USB packet, the given stream callback function is executed repeatedly until the endpoint\r
* is ready to accept the next packet, allowing for early aborts of stream transfers.\r
*\r
- * The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token\r
- * NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled\r
- * and this function has the Callback parameter omitted.\r
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.\r
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are\r
+ * disabled and this function has the Callback parameter omitted.\r
*\r
* \note This routine should not be used on CONTROL type endpoints.\r
*\r
*/\r
uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length\r
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)\r
- , uint8_t (* const Callback)(void)\r
+ , StreamCallbackPtr_t Callback\r
#endif\r
) ATTR_NON_NULL_PTR_ARG(1);\r
\r
* each USB packet, the given stream callback function is executed repeatedly until the endpoint\r
* is ready to accept the next packet, allowing for early aborts of stream transfers.\r
*\r
- * The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token\r
- * NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled\r
- * and this function has the Callback parameter omitted.\r
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.\r
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are\r
+ * disabled and this function has the Callback parameter omitted.\r
*\r
* \note This routine should not be used on CONTROL type endpoints.\r
*\r
*/\r
uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length\r
#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)\r
- , uint8_t (* const Callback)(void)\r
+ , StreamCallbackPtr_t Callback\r
#endif\r
) ATTR_NON_NULL_PTR_ARG(1);\r
\r
#define _ENDPOINT_GET_DOUBLEBANK2(details) _ENDPOINT_GET_DOUBLEBANK3(details)\r
#define _ENDPOINT_GET_DOUBLEBANK3(maxsize, db) db\r
\r
- #if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER)\r
+ #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)\r
#define ENDPOINT_DETAILS_EP0 64, true\r
#define ENDPOINT_DETAILS_EP1 256, true\r
#define ENDPOINT_DETAILS_EP2 64, true\r
projects / pub / USBasp.git / blobdiff