Deleted StdDescriptors.c, renamed USB_GetDescriptor() to CALLBACK_USB_GetDescriptor...

[pub/USBasp.git] / Demos / Device / Mouse / Mouse.c

diff --git a/Demos/Device/Mouse/Mouse.c b/Demos/Device/Mouse/Mouse.c
index 8998530..32b12fc 100644 (file)
--- a/Demos/Device/Mouse/Mouse.c
+++ b/Demos/Device/Mouse/Mouse.c
@@ -39,10 +39,7 @@
 /* Scheduler Task List */\r
 TASK_LIST\r
 {\r
-       #if !defined(INTERRUPT_CONTROL_ENDPOINT)\r
        { .Task = USB_USBTask          , .TaskStatus = TASK_STOP },\r
-       #endif\r
-       \r
        { .Task = USB_Mouse_Report     , .TaskStatus = TASK_STOP },\r
 };\r
 \r
@@ -103,12 +100,10 @@ int main(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r
-EVENT_HANDLER(USB_Connect)\r
+void EVENT_USB_Connect(void)\r
 {\r
-       #if !defined(INTERRUPT_CONTROL_ENDPOINT)\r
        /* Start USB management task */\r
        Scheduler_SetTaskMode(USB_USBTask, TASK_RUN);\r
-       #endif\r
        \r
        /* Indicate USB enumerating */\r
        UpdateStatus(Status_USBEnumerating);\r
@@ -117,32 +112,14 @@ EVENT_HANDLER(USB_Connect)
        UsingReportProtocol = true;\r
 }\r
 \r
-/** Event handler for the USB_Reset event. This fires when the USB interface is reset by the USB host, before the\r
- *  enumeration process begins, and enables the control endpoint interrupt so that control requests can be handled\r
- *  asynchronously when they arrive rather than when the control endpoint is polled manually.\r
- */\r
-EVENT_HANDLER(USB_Reset)\r
-{\r
-       #if defined(INTERRUPT_CONTROL_ENDPOINT)\r
-       /* Select the control endpoint */\r
-       Endpoint_SelectEndpoint(ENDPOINT_CONTROLEP);\r
-\r
-       /* Enable the endpoint SETUP interrupt ISR for the control endpoint */\r
-       USB_INT_Enable(ENDPOINT_INT_SETUP);\r
-       #endif\r
-}\r
-\r
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops the USB management and Mouse reporting tasks.\r
  */\r
-EVENT_HANDLER(USB_Disconnect)\r
+void EVENT_USB_Disconnect(void)\r
 {\r
        /* Stop running mouse reporting and USB management tasks */\r
        Scheduler_SetTaskMode(USB_Mouse_Report, TASK_STOP);\r
-\r
-       #if !defined(INTERRUPT_CONTROL_ENDPOINT)\r
        Scheduler_SetTaskMode(USB_USBTask, TASK_STOP);\r
-       #endif\r
 \r
        /* Indicate USB not ready */\r
        UpdateStatus(Status_USBNotReady);\r
@@ -151,7 +128,7 @@ EVENT_HANDLER(USB_Disconnect)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration\r
  *  of the USB device after enumeration - the device endpoints are configured and the mouse reporting task started.\r
  */ \r
-EVENT_HANDLER(USB_ConfigurationChanged)\r
+void EVENT_USB_ConfigurationChanged(void)\r
 {\r
        /* Setup Mouse Report Endpoint */\r
        Endpoint_ConfigureEndpoint(MOUSE_EPNUM, EP_TYPE_INTERRUPT,\r
@@ -169,7 +146,7 @@ EVENT_HANDLER(USB_ConfigurationChanged)
  *  control requests that are not handled internally by the USB library (including the HID commands, which are\r
  *  all issued via the control endpoint), so that they can be handled appropriately for the application.\r
  */\r
-EVENT_HANDLER(USB_UnhandledControlPacket)\r
+void EVENT_USB_UnhandledControlPacket(void)\r
 {\r
        /* Handle HID Class specific requests */\r
        switch (USB_ControlRequest.bRequest)\r
@@ -218,7 +195,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket)
                                Endpoint_ClearSETUP();\r
                                \r
                                /* Set or clear the flag depending on what the host indicates that the current Protocol should be */\r
-                               UsingReportProtocol = (USB_ControlRequest.wValue != 0x0000);\r
+                               UsingReportProtocol = (USB_ControlRequest.wValue != 0);\r
                                \r
                                /* Acknowledge status stage */\r
                                while (!(Endpoint_IsINReady()));\r
@@ -381,30 +358,3 @@ TASK(USB_Mouse_Report)
                SendNextReport();\r
        }\r
 }\r
-\r
-#if defined(INTERRUPT_CONTROL_ENDPOINT)\r
-/** ISR for the general Pipe/Endpoint interrupt vector. This ISR fires when an endpoint's status changes (such as\r
- *  a packet has been received) on an endpoint with its corresponding ISR enabling bits set. This is used to send\r
- *  HID packets to the host each time the HID interrupt endpoints polling period elapses, as managed by the USB\r
- *  controller. It is also used to respond to standard and class specific requests send to the device on the control\r
- *  endpoint, by handing them off to the LUFA library when they are received.\r
- */\r
-ISR(ENDPOINT_PIPE_vect, ISR_BLOCK)\r
-{\r
-       /* Save previously selected endpoint before selecting a new endpoint */\r
-       uint8_t PrevSelectedEndpoint = Endpoint_GetCurrentEndpoint();\r
-\r
-       /* Check if the control endpoint has received a request */\r
-       if (Endpoint_HasEndpointInterrupted(ENDPOINT_CONTROLEP))\r
-       {\r
-               /* Process the control request */\r
-               USB_USBTask();\r
-\r
-               /* Handshake the endpoint setup interrupt - must be after the call to USB_USBTask() */\r
-               USB_INT_Clear(ENDPOINT_INT_SETUP);\r
-       }\r
-\r
-       /* Restore previously selected endpoint */\r
-       Endpoint_SelectEndpoint(PrevSelectedEndpoint);\r
-}\r
-#endif\r