Change the AVRISP project's RESET LINE makefile tokens to AUX LINE, as it is not...

[pub/USBasp.git] / Projects / AVRISP-MKII / AVRISP.txt

diff --git a/Projects/AVRISP-MKII/AVRISP.txt b/Projects/AVRISP-MKII/AVRISP.txt
index 8ea8c8d..9bed59e 100644 (file)
--- a/Projects/AVRISP-MKII/AVRISP.txt
+++ b/Projects/AVRISP-MKII/AVRISP.txt
@@ -109,7 +109,7 @@
  *  </table>\r
  *\r
  *  <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n\r
- *  <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>\r
+ *  <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>\r
  *\r
  *  \section Sec_PDI PDI Connections\r
  *  Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):\r
@@ -153,7 +153,8 @@
  *  </table>\r
  *\r
  *  <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
- *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>\r
+ *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n\r
+ *  <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>\r
  *\r
  *  \section Sec_TPI TPI Connections\r
  *  Connections to the device for TPI programming<b><sup>1</sup></b> (when enabled):\r
@@ -197,7 +198,8 @@
  *  </table>\r
  *\r
  *  <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together\r
- *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>\r
+ *                         via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n\r
+ *  <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>\r
  *\r
  *  \section SSec_Options Project Options\r
  *\r
@@ -210,27 +212,29 @@
  *    <td><b>Description:</b></td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>RESET_LINE_PORT</td>\r
+ *    <td>AUX_LINE_PORT</td>\r
  *    <td>Makefile CDEFS</td>\r
- *    <td>PORT register for the programmer's target RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>\r
+ *    <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,\r
+ *        but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>RESET_LINE_PIN</td>\r
+ *    <td>AUX_LINE_PIN</td>\r
  *    <td>Makefile CDEFS</td>\r
- *    <td>PIN register for the programmer's target RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>\r
+ *    <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,\r
+ *        but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>RESET_LINE_DDR</td>\r
+ *    <td>AUX_LINE_DDR</td>\r
  *    <td>Makefile CDEFS</td>\r
- *    <td>DDR register for the programmer's target RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>\r
+ *    <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,\r
+ *        but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>\r
  *   </tr>\r
  *   <tr>\r
- *    <td>RESET_LINE_MASK</td>\r
+ *    <td>AUX_LINE_MASK</td>\r
  *    <td>Makefile CDEFS</td>\r
- *    <td>Mask for the programmer's target RESET line on the chosen port. <b>Must not be the AVR's /SS pin</b>, as the\r
- *        target pins are tri-stated when not in use, and low signals on the /SS pin will force SPI slave mode when the\r
- *        pin is configured as an input. When in PDI programming mode, this is the target clock pin.\r
- *        <i>Ignored when compiled for the XPLAIN board.</i></td>\r
+ *    <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,\r
+ *        but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>. <i>Ignored when\r
+ *        compiled for the XPLAIN board.</i></td>\r
  *   </tr>\r
  *   <tr>\r
  *    <td>VTARGET_ADC_CHANNEL</td>\r
@@ -252,7 +256,7 @@
  *    <td>Makefile CDEFS</td>\r
  *    <td>Define to force the PDI and TPI protocols (when enabled) to use the much faster hardware USART instead of bit-banging\r
  *        to match the official AVRISP pinout. This breaks pinout compatibility with the official AVRISP MKII (and requires \r
- *        seperate ISP and PDI/TPI programming headers) but increases programming speed dramatically.\r
+ *        seperate ISP, PDI, and TPI programming headers) but increases programming speed dramatically.\r
  *        <i>Ignored when compiled for the XPLAIN board.</i></td>  \r
  *   </tr>\r
  *  </table>\r