/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
-
+ Copyright (C) Dean Camera, 2012.
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
* Main source file for the RNDISEthernetHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
-
+
#include "RNDISEthernetHost.h"
/** Buffer to hold incoming and outgoing Ethernet packets. */
-uint8_t PacketBuffer[1024];
+static int8_t PacketBuffer[1024];
/** LUFA RNDIS Class driver interface configuration and state information. This structure is
* passed to all RNDIS Class driver functions, so that multiple instances of the same class
{
.Config =
{
- .DataINPipeNumber = 1,
- .DataINPipeDoubleBank = false,
-
- .DataOUTPipeNumber = 2,
- .DataOUTPipeDoubleBank = false,
-
- .NotificationPipeNumber = 3,
- .NotificationPipeDoubleBank = false,
-
- .HostMaxPacketSize = sizeof(PacketBuffer),
+ .DataINPipe =
+ {
+ .Address = (PIPE_DIR_IN | 1),
+ .Banks = 1,
+ },
+ .DataOUTPipe =
+ {
+ .Address = (PIPE_DIR_OUT | 2),
+ .Banks = 1,
+ },
+ .NotificationPipe =
+ {
+ .Address = (PIPE_DIR_IN | 3),
+ .Banks = 1,
+ },
+ .HostMaxPacketSize = sizeof(PacketBuffer),
},
};
-
+
+
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
for (;;)
{
- switch (USB_HostState)
- {
- case HOST_STATE_Addressed:
- LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
- uint16_t ConfigDescriptorSize;
- uint8_t ConfigDescriptorData[512];
-
- if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
- sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
- {
- puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (RNDIS_Host_ConfigurePipes(&Ethernet_RNDIS_Interface,
- ConfigDescriptorSize, ConfigDescriptorData) != RNDIS_ENUMERROR_NoError)
- {
- puts_P(PSTR("Attached Device Not a Valid RNDIS Class Device.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Setting Device Configuration.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- if (RNDIS_Host_InitializeDevice(&Ethernet_RNDIS_Interface) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Initializing Device.\r\n"));
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), Ethernet_RNDIS_Interface.State.DeviceMaxPacketSize);
-
- uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST | REMOTE_NDIS_PACKET_ALL_MULTICAST);
- if (RNDIS_Host_SetRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_CURRENT_PACKET_FILTER,
- &PacketFilter, sizeof(PacketFilter)) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Setting Device Packet Filter.\r\n"));
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- uint32_t VendorID;
- if (RNDIS_Host_QueryRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_VENDOR_ID,
- &VendorID, sizeof(VendorID)) != HOST_SENDCONTROL_Successful)
- {
- puts_P(PSTR("Error Getting Vendor ID.\r\n"));
-
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
- USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
- }
-
- printf_P(PSTR("Device Vendor ID: 0x%08lX\r\n"), VendorID);
-
- puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
- LEDs_SetAllLEDs(LEDMASK_USB_READY);
- USB_HostState = HOST_STATE_Configured;
- break;
- case HOST_STATE_Configured:
- PrintIncomingPackets();
-
- break;
- }
-
+ RNDISHost_Task();
+
RNDIS_Host_USBTask(&Ethernet_RNDIS_Interface);
USB_USBTask();
}
}
-/** Prints incoming packets from the attached RNDIS device to the serial port. */
-void PrintIncomingPackets(void)
+/** Task to manage an enumerated USB RNDIS device once connected, to display device
+ * received data packets.
+ */
+void RNDISHost_Task(void)
{
+ if (USB_HostState != HOST_STATE_Configured)
+ return;
+
if (RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface))
{
LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
uint16_t PacketLength;
RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface, &PacketBuffer, &PacketLength);
-
+
printf_P(PSTR("***PACKET (Size %d)***\r\n"), PacketLength);
-
+
for (uint16_t i = 0; i < PacketLength; i++)
printf("0x%02x ", PacketBuffer[i]);
printf_P(PSTR("\r\n\r\n"));
-
+
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
}
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
- SerialStream_Init(9600, false);
+ Serial_Init(9600, false);
LEDs_Init();
USB_Init();
+
+ /* Create a stdio stream for the serial port for stdin and stdout */
+ Serial_CreateStream(NULL);
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
*/
void EVENT_USB_Host_DeviceEnumerationComplete(void)
{
+ LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+ uint16_t ConfigDescriptorSize;
+ uint8_t ConfigDescriptorData[512];
+
+ if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+ sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
+ {
+ puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (RNDIS_Host_ConfigurePipes(&Ethernet_RNDIS_Interface,
+ ConfigDescriptorSize, ConfigDescriptorData) != RNDIS_ENUMERROR_NoError)
+ {
+ puts_P(PSTR("Attached Device Not a Valid RNDIS Class Device.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Setting Device Configuration.\r\n"));
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ return;
+ }
+
+ if (RNDIS_Host_InitializeDevice(&Ethernet_RNDIS_Interface) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Initializing Device.\r\n"));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("Device Max Transfer Size: %lu bytes.\r\n"), Ethernet_RNDIS_Interface.State.DeviceMaxPacketSize);
+
+ uint32_t PacketFilter = (REMOTE_NDIS_PACKET_DIRECTED | REMOTE_NDIS_PACKET_BROADCAST | REMOTE_NDIS_PACKET_ALL_MULTICAST);
+ if (RNDIS_Host_SetRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_CURRENT_PACKET_FILTER,
+ &PacketFilter, sizeof(PacketFilter)) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Setting Device Packet Filter.\r\n"));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ uint32_t VendorID;
+ if (RNDIS_Host_QueryRNDISProperty(&Ethernet_RNDIS_Interface, OID_GEN_VENDOR_ID,
+ &VendorID, sizeof(VendorID)) != HOST_SENDCONTROL_Successful)
+ {
+ puts_P(PSTR("Error Getting Vendor ID.\r\n"));
+
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+ USB_Host_SetDeviceConfiguration(0);
+ return;
+ }
+
+ printf_P(PSTR("Device Vendor ID: 0x%08lX\r\n"), VendorID);
+
+ puts_P(PSTR("RNDIS Device Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
}
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
- USB_ShutDown();
+ USB_Disable();
printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
-void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
+ const uint8_t SubErrorCode)
{
printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"
" -- Error Code %d\r\n"
" -- Sub Error Code %d\r\n"
" -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
+
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
+
projects / pub / USBasp.git / blobdiff