Oops - with new changes to the way the device Configuration Descriptor is retrieved...

[pub/USBasp.git] / LUFA / Drivers / Board / Temperature.h

diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index 6e1827e..f4ecf71 100644 (file)
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -36,7 +36,15 @@
 /** \ingroup Group_BoardDrivers\r
  *  @defgroup Group_Temperature Temperature Driver - LUFA/Drivers/Board/Temperature.h\r
  *\r
- *  Functions, macros, variables, enums and types related to the control of board temperature sensors.\r
+ *  \section Sec_Dependencies Module Source Dependencies\r
+ *  The following files must be built with any user project that uses this module:\r
+ *    - LUFA/Drivers/Board/Temperature.c\r
+ *\r
+ *  \section Module Description\r
+ *  Temperature sensor driver. This provides an easy to use interface for the hardware temperature sensor located\r
+ *  on many boards. It provides an interface to configure the sensor and appropriate ADC channel, plus read out the\r
+ *  current temperature in degrees C. It is designed for and will only work with the temperature sensor located on the\r
+ *  official Atmel USB AVR boards, as each sensor has different characteristics.\r
  *\r
  *  @{\r
  */\r
@@ -52,12 +60,12 @@
        /* Includes: */\r
                #include <avr/pgmspace.h>\r
 \r
-               #include "../AT90USBXXX/ADC.h"\r
                #include "../../Common/Common.h"\r
+               #include "../Peripheral/ADC.h"\r
        \r
                #if !defined(BOARD)\r
-                       #error #error BOARD must be set in makefile to a value specified in BoardTypes.h.       \r
-               #elif (BOARD != BOARD_USBKEY) && (BOARD != BOARD_STK525) && (BOARD != BOARD_STK526)\r
+                       #error BOARD must be set in makefile to a value specified in BoardTypes.h.      \r
+               #elif (BOARD != BOARD_USBKEY) && (BOARD != BOARD_STK525) && (BOARD != BOARD_STK526) && (BOARD != BOARD_USER)\r
                        #error The selected board does not contain a temperature sensor.\r
                #endif\r
 \r
@@ -71,13 +79,13 @@
                        /** ADC channel number for the temperature sensor. */\r
                        #define TEMP_ADC_CHANNEL   0\r
                        \r
-                       /** Minimum returnable temperature from the Temperature_GetTemperature() function. */\r
+                       /** Minimum returnable temperature from the \ref Temperature_GetTemperature() function. */\r
                        #define TEMP_MIN_TEMP      TEMP_TABLE_OFFSET\r
 \r
-                       /** Maximum returnable temperature from the Temperature_GetTemperature() function. */\r
+                       /** Maximum returnable temperature from the \ref Temperature_GetTemperature() function. */\r
                        #define TEMP_MAX_TEMP      ((TEMP_TABLE_SIZE - 1) + TEMP_TABLE_OFFSET)\r
                \r
-               /* Psuedo-Functions: */\r
+               /* Pseudo-Function Macros: */\r
                        #if defined(__DOXYGEN__)\r
                                /** Initializes the temperature sensor driver, including setting up the appropriate ADC channel.\r
                                 *  This must be called before any other temperature sensor routines.\r
@@ -92,7 +100,7 @@
 \r
                /* Function Prototypes: */\r
                        /** Performs a complete ADC on the temperature sensor channel, and converts the result into a\r
-                        *  valid temperature between TEMP_MIN_TEMP and TEMP_MAX_TEMP in degrees Celsius.\r
+                        *  valid temperature between \ref TEMP_MIN_TEMP and \ref TEMP_MAX_TEMP in degrees Celsius.\r
                         *\r
                         *  \return Signed temperature in degrees Celsius\r
                         */\r