Speed up bit-banged USART code in the AVRISP project.

[pub/USBasp.git] / LUFA / Drivers / USB / Class / Host / Printer.h

diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h
index d61eb4a..f4fa860 100644 (file)
--- a/LUFA/Drivers/USB/Class/Host/Printer.h
+++ b/LUFA/Drivers/USB/Class/Host/Printer.h
@@ -66,7 +66,10 @@
                                const struct\r
                                {\r
                                        uint8_t  DataINPipeNumber; /**< Pipe number of the Printer interface's IN data pipe */\r
                                const struct\r
                                {\r
                                        uint8_t  DataINPipeNumber; /**< Pipe number of the Printer interface's IN data pipe */\r

+                                       bool     DataINPipeDoubleBank; /** Indicates if the Printer interface's IN data pipe should use double banking */\r
+\r

                                        uint8_t  DataOUTPipeNumber; /**< Pipe number of the Printer interface's OUT data pipe */\r
                                        uint8_t  DataOUTPipeNumber; /**< Pipe number of the Printer interface's OUT data pipe */\r

+                                       bool     DataOUTPipeDoubleBank; /** Indicates if the Printer interface's OUT data pipe should use double banking */\r

                                } Config; /**< Config data for the USB class interface within the device. All elements in this section\r
                                           *   <b>must</b> be set or the interface will fail to enumerate and operate correctly.\r
                                           */\r
                                } Config; /**< Config data for the USB class interface within the device. All elements in this section\r
                                           *   <b>must</b> be set or the interface will fail to enumerate and operate correctly.\r
                                           */\r


@@ -119,7 +122,7 @@
                         *  \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum\r
                         */\r
                        uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize,\r
                         *  \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum\r
                         */\r
                        uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize,\r

-                                                        uint8_t* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1, 3);\r
+                                                        void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);\r

                        \r
                        /** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called\r
                         *  once the connected device's configuration has been set, to ensure the printer is ready to accept commands.\r
                        \r
                        /** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called\r
                         *  once the connected device's configuration has been set, to ensure the printer is ready to accept commands.\r


@@ -139,7 +142,7 @@
                         *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum\r
                         */\r
                        uint8_t PRNT_Host_GetPortStatus(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint8_t* const PortStatus)\r
                         *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum\r
                         */\r
                        uint8_t PRNT_Host_GetPortStatus(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint8_t* const PortStatus)\r

-                                                       ATTR_NON_NULL_PTR_ARG(1, 2);\r
+                                                       ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);\r

 \r
                        /** Soft-resets the attached printer, readying it for new commands.\r
                         *\r
 \r
                        /** Soft-resets the attached printer, readying it for new commands.\r
                         *\r


@@ -160,11 +163,11 @@
                         *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum\r
                         */\r
                        uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, void* PrinterCommands, \r
                         *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum\r
                         */\r
                        uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, void* PrinterCommands, \r

-                                                  uint16_t CommandSize) ATTR_NON_NULL_PTR_ARG(1, 2);\r
+                                                  uint16_t CommandSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);\r

 \r
                        /** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a\r
                         *  Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus\r
 \r
                        /** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a\r
                         *  Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus\r

-                        *  the maximum reportable string length is two less than the size given (to accomodate the Unicode string length\r
+                        *  the maximum reportable string length is two less than the size given (to accommodate the Unicode string length\r

                         *  bytes which are removed).\r
                         *\r
                         *  This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device.\r
                         *  bytes which are removed).\r
                         *\r
                         *  This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device.\r