Update UC3 platform driver support to use the bitmasks defined in the header files...

[pub/USBasp.git] / Bootloaders / DFU / BootloaderDFU.c

diff --git a/Bootloaders/DFU/BootloaderDFU.c b/Bootloaders/DFU/BootloaderDFU.c
index f9bc4e0..1dae162 100644 (file)
--- a/Bootloaders/DFU/BootloaderDFU.c
+++ b/Bootloaders/DFU/BootloaderDFU.c
@@ -87,7 +87,7 @@ static uint8_t Flash64KBPage = 0;
  */
 static uint16_t StartAddr = 0x0000;
 
  */
 static uint16_t StartAddr = 0x0000;
 

-/** Memory end address, indicating the end address to read to/write from in the memory being addressed (either FLASH
+/** Memory end address, indicating the end address to read from/write to in the memory being addressed (either FLASH

  *  of EEPROM depending on the issued command from the host).
  */
 static uint16_t EndAddr = 0x0000;
  *  of EEPROM depending on the issued command from the host).
  */
 static uint16_t EndAddr = 0x0000;


@@ -109,7 +109,7 @@ int main(void)
 
        /* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */
        PORTF |= (1 << 4);
 
        /* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */
        PORTF |= (1 << 4);

-       _delay_ms(10);
+       Delay_MS(10);

 
        /* If the TCK pin is not jumpered to ground, start the user application instead */
        RunBootloader = (!(PINF & (1 << 4)));
 
        /* If the TCK pin is not jumpered to ground, start the user application instead */
        RunBootloader = (!(PINF & (1 << 4)));


@@ -119,6 +119,9 @@ int main(void)
        MCUCR &= ~(1 << JTD);   
        #endif
 
        MCUCR &= ~(1 << JTD);   
        #endif
 

+       /* Turn on first LED on the board to indicate that the bootloader has started */
+       LEDs_SetAllLEDs(LEDS_LED1);
+

        /* Enable global interrupts so that the USB stack can function */
        sei();
 
        /* Enable global interrupts so that the USB stack can function */
        sei();
 


@@ -149,6 +152,11 @@ void SetupHardware(void)
 
        /* Initialize the USB subsystem */
        USB_Init();
 
        /* Initialize the USB subsystem */
        USB_Init();

+       LEDs_Init();
+       
+       /* Bootloader active LED toggle timer initialization */
+       TIMSK1 = (1 << TOIE1);
+       TCCR1B = ((1 << CS11) | (1 << CS10));

 }
 
 /** Resets all configured hardware required for the bootloader back to their original states. */
 }
 
 /** Resets all configured hardware required for the bootloader back to their original states. */


@@ -162,15 +170,18 @@ void ResetHardware(void)
        MCUCR = 0;
 }
 
        MCUCR = 0;
 }
 

+/** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */
+ISR(TIMER1_OVF_vect, ISR_BLOCK)
+{
+       LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
+}
+

 /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
  *  the device from the USB host before passing along unhandled control requests to the library for processing
  *  internally.
  */
 void EVENT_USB_Device_ControlRequest(void)
 /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
  *  the device from the USB host before passing along unhandled control requests to the library for processing
  *  internally.
  */
 void EVENT_USB_Device_ControlRequest(void)

-{
-       /* Get the size of the command and data from the wLength value */
-       SentCommand.DataSize = USB_ControlRequest.wLength;
-       
+{      

        /* Ignore any requests that aren't directed to the DFU interface */
        if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
            (REQTYPE_CLASS | REQREC_INTERFACE))
        /* Ignore any requests that aren't directed to the DFU interface */
        if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
            (REQTYPE_CLASS | REQREC_INTERFACE))


@@ -178,6 +189,12 @@ void EVENT_USB_Device_ControlRequest(void)
                return;
        }
 
                return;
        }
 

+       /* Activity - toggle indicator LEDs */
+       LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
+
+       /* Get the size of the command and data from the wLength value */
+       SentCommand.DataSize = USB_ControlRequest.wLength;
+

        switch (USB_ControlRequest.bRequest)
        {
                case DFU_REQ_DNLOAD:
        switch (USB_ControlRequest.bRequest)
        {
                case DFU_REQ_DNLOAD: