Add start of a SDP service table, which will be linked to the Bluetooth SDP code.

[pub/USBasp.git] / Bootloaders / DFU / BootloaderDFU.txt

diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt
index 7107cc1..2ca771c 100644 (file)
--- a/Bootloaders/DFU/BootloaderDFU.txt
+++ b/Bootloaders/DFU/BootloaderDFU.txt
@@ -6,6 +6,15 @@
  \r
 /** \mainpage DFU Class USB AVR Bootloader\r
  *\r
+ *  \section SSec_Compat Demo Compatibility:\r
+ *\r
+ *  The following list indicates what microcontrollers are compatible with this demo.\r
+ *\r
+ *  - Series 7 USB AVRs\r
+ *  - Series 6 USB AVRs\r
+ *  - Series 4 USB AVRs\r
+ *  - Series 2 USB AVRs (Excluding the 8KB FLASH variants)\r
+ *\r
  *  \section SSec_Info USB Information:\r
  *\r
  *  The following table gives a rundown of the USB utilization of this demo.\r
@@ -39,14 +48,18 @@
  *  software to load firmware onto the AVR.\r
  *  \r
  *  This bootloader is compatible with Atmel's FLIP application. However, it requires the use of Atmel's\r
- *  DFU drivers. You will need to install Atmel's DFU drivers prior to using this bootloader.\r
+ *  DFU drivers. You will need to install Atmel's DFU drivers prior to using this bootloader. If you are\r
+ *  using a 64 bit Windows OS, you will need to either disable the driver signing requirement (see online\r
+ *  tutorials for details) or use a digitally signed version of the official Atmel driver provided by a\r
+ *  third party AVR user at\r
+ *  <a>http://www.avrfreaks.net/index.php?module=Freaks%20Academy&func=viewItem&item_id=2196&item_type=project</a>.\r
  *  \r
  *  As an open-source option, this bootloader is also compatible with the Linux Atmel USB DFU Programmer\r
- *  software, available for download at http://sourceforge.net/projects/dfu-programmer/.\r
+ *  software, available for download at <a>http://sourceforge.net/projects/dfu-programmer/</a>.\r
  *  \r
- *  If SECURE_MODE is defined as true, upon startup the bootloader will be locked, with only the chip erase\r
+ *  If SECURE_MODE is defined as true, upon start-up the bootloader will be locked, with only the chip erase\r
  *  function available (similar to Atmel's DFU bootloader). If SECURE_MODE is defined as false, all functions \r
- *  are usable on startup without the prerequisite firmware erase.\r
+ *  are usable on start-up without the prerequisite firmware erase.\r
  *  \r
  *  Out of the box this bootloader builds for the USB1287, and should fit into 4KB of bootloader space. If\r
  *  you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU\r
@@ -69,9 +82,9 @@
  *   <tr>\r
  *    <td>SECURE_MODE</td>\r
  *    <td>BootloaderDFU.h</td>\r
- *    <td>If defined to true, the bootloader will not accept any memory commands other than a chip erase on statup, until an\r
- *        erase has been perfomed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from\r
+ *    <td>If defined to true, the bootloader will not accept any memory commands other than a chip erase on start-up, until an\r
+ *        erase has been performed. This can be used in conjunction with the AVR's lockbits to prevent the AVRs firmware from\r
  *        being dumped by unauthorized persons.</td>\r
  *   </tr>\r
  *  </table>\r
- */
\ No newline at end of file
+ */\r