Fix compilation failure in DualVirtualSerial.c.

[pub/USBasp.git] / Bootloaders / CDC / BootloaderCDC.c

diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c
index 97a0f1b..cb6a980 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.c
+++ b/Bootloaders/CDC/BootloaderCDC.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2015.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2015  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -18,7 +18,7 @@
   advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 

-  The author disclaim all warranties with regard to this
+  The author disclaims all warranties with regard to this

   software, including all implied warranties of merchantability
   and fitness.  In no event shall the author be liable for any
   special, indirect or consequential damages or any damages
   software, including all implied warranties of merchantability
   and fitness.  In no event shall the author be liable for any
   special, indirect or consequential damages or any damages


@@ -39,23 +39,102 @@
 /** Contains the current baud rate and other settings of the first virtual serial port. This must be retained as some
  *  operating systems will not open the port unless the settings can be set successfully.
  */
 /** Contains the current baud rate and other settings of the first virtual serial port. This must be retained as some
  *  operating systems will not open the port unless the settings can be set successfully.
  */

-CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,
-                                   .CharFormat  = OneStopBit,
-                                   .ParityType  = Parity_None,
-                                   .DataBits    = 8            };
+static CDC_LineEncoding_t LineEncoding = { .BaudRateBPS = 0,
+                                           .CharFormat  = CDC_LINEENCODING_OneStopBit,
+                                           .ParityType  = CDC_PARITY_None,
+                                           .DataBits    = 8                            };

 
 /** Current address counter. This stores the current address of the FLASH or EEPROM as set by the host,
  *  and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued
  *  command.)
  */
 
 /** Current address counter. This stores the current address of the FLASH or EEPROM as set by the host,
  *  and is used when reading or writing to the AVRs memory (either FLASH or EEPROM depending on the issued
  *  command.)
  */

-uint32_t CurrAddress;
+static uint32_t CurrAddress;

 
 /** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
  *  via a watchdog reset. When cleared the bootloader will exit, starting the watchdog and entering an infinite
  *  loop until the AVR restarts and the application runs.
  */
 
 /** Flag to indicate if the bootloader should be running, or should exit and allow the application code to run
  *  via a watchdog reset. When cleared the bootloader will exit, starting the watchdog and entering an infinite
  *  loop until the AVR restarts and the application runs.
  */

-bool RunBootloader = true;
+static bool RunBootloader = true;

 
 

+/** Magic lock for forced application start. If the HWBE fuse is programmed and BOOTRST is unprogrammed, the bootloader
+ *  will start if the /HWB line of the AVR is held low and the system is reset. However, if the /HWB line is still held
+ *  low when the application attempts to start via a watchdog reset, the bootloader will re-start. If set to the value
+ *  \ref MAGIC_BOOT_KEY the special init function \ref Application_Jump_Check() will force the application to start.
+ */
+uint16_t MagicBootKey ATTR_NO_INIT;
+
+
+/** Special startup routine to check if the bootloader was started via a watchdog reset, and if the magic application
+ *  start key has been loaded into \ref MagicBootKey. If the bootloader started via the watchdog and the key is valid,
+ *  this will force the user application to start via a software jump.
+ */
+void Application_Jump_Check(void)
+{
+       bool JumpToApplication = false;
+
+       #if (BOARD == BOARD_LEONARDO)
+               /* Enable pull-up on the IO13 pin so we can use it to select the mode */
+               PORTC |= (1 << 7);
+               Delay_MS(10);
+
+               /* If IO13 is not jumpered to ground, start the user application instead */
+               JumpToApplication = ((PINC & (1 << 7)) != 0);
+
+               /* Disable pull-up after the check has completed */
+               PORTC &= ~(1 << 7);
+       #elif ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
+               /* Disable JTAG debugging */
+               JTAG_DISABLE();
+
+               /* Enable pull-up on the JTAG TCK pin so we can use it to select the mode */
+               PORTF |= (1 << 4);
+               Delay_MS(10);
+
+               /* If the TCK pin is not jumpered to ground, start the user application instead */
+               JumpToApplication = ((PINF & (1 << 4)) != 0);
+
+               /* Re-enable JTAG debugging */
+               JTAG_ENABLE();
+       #else
+               /* Check if the device's BOOTRST fuse is set */
+               if (boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS) & FUSE_BOOTRST)
+               {
+                       /* If the reset source was not an external reset or the key is correct, clear it and jump to the application */
+                       if (!(MCUSR & (1 << EXTRF)) || (MagicBootKey == MAGIC_BOOT_KEY))
+                         JumpToApplication = true;
+
+                       /* Clear reset source */
+                       MCUSR &= ~(1 << EXTRF);
+               }
+               else
+               {
+                       /* If the reset source was the bootloader and the key is correct, clear it and jump to the application;
+                        * this can happen in the HWBE fuse is set, and the HBE pin is low during the watchdog reset */
+                       if ((MCUSR & (1 << WDRF)) && (MagicBootKey == MAGIC_BOOT_KEY))
+                               JumpToApplication = true;
+
+                       /* Clear reset source */
+                       MCUSR &= ~(1 << WDRF);
+               }
+       #endif
+
+       /* Don't run the user application if the reset vector is blank (no app loaded) */
+       bool ApplicationValid = (pgm_read_word_near(0) != 0xFFFF);
+
+       /* If a request has been made to jump to the user application, honor it */
+       if (JumpToApplication && ApplicationValid)
+       {
+               /* Turn off the watchdog */
+               MCUSR &= ~(1 << WDRF);
+               wdt_disable();
+
+               /* Clear the boot key and jump to the user application */
+               MagicBootKey = 0;
+
+               // cppcheck-suppress constStatement
+               ((void (*)(void))0x0000)();
+       }
+}

 
 /** Main program entry point. This routine configures the hardware required by the bootloader, then continuously
  *  runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start
 
 /** Main program entry point. This routine configures the hardware required by the bootloader, then continuously
  *  runs the bootloader processing routine until instructed to soft-exit, or hard-reset via the watchdog to start


@@ -66,8 +145,11 @@ int main(void)
        /* Setup hardware required for the bootloader */
        SetupHardware();
 
        /* Setup hardware required for the bootloader */
        SetupHardware();
 

+       /* Turn on first LED on the board to indicate that the bootloader has started */
+       LEDs_SetAllLEDs(LEDS_LED1);
+

        /* Enable global interrupts so that the USB stack can function */
        /* Enable global interrupts so that the USB stack can function */

-       sei();
+       GlobalInterruptEnable();

 
        while (RunBootloader)
        {
 
        while (RunBootloader)
        {


@@ -75,9 +157,15 @@ int main(void)
                USB_USBTask();
        }
 
                USB_USBTask();
        }
 

+       /* Wait a short time to end all USB transactions and then disconnect */
+       _delay_us(1000);
+

        /* Disconnect from the host - USB interface will be reset later along with the AVR */
        USB_Detach();
 
        /* Disconnect from the host - USB interface will be reset later along with the AVR */
        USB_Detach();
 

+       /* Unlock the forced application start mode of the bootloader if it is restarted */
+       MagicBootKey = MAGIC_BOOT_KEY;
+

        /* Enable the watchdog and force a timeout to reset the AVR */
        wdt_enable(WDTO_250MS);
 
        /* Enable the watchdog and force a timeout to reset the AVR */
        wdt_enable(WDTO_250MS);
 


@@ -85,7 +173,7 @@ int main(void)
 }
 
 /** Configures all hardware required for the bootloader. */
 }
 
 /** Configures all hardware required for the bootloader. */

-void SetupHardware(void)
+static void SetupHardware(void)

 {
        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);
 {
        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);


@@ -98,8 +186,19 @@ void SetupHardware(void)
        MCUCR = (1 << IVCE);
        MCUCR = (1 << IVSEL);
 
        MCUCR = (1 << IVCE);
        MCUCR = (1 << IVSEL);
 

-       /* Initialize USB Subsystem */
+       /* Initialize the USB and other board hardware drivers */

        USB_Init();
        USB_Init();

+       LEDs_Init();
+
+       /* Bootloader active LED toggle timer initialization */
+       TIMSK1 = (1 << TOIE1);
+       TCCR1B = ((1 << CS11) | (1 << CS10));
+}
+
+/** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */
+ISR(TIMER1_OVF_vect, ISR_BLOCK)
+{
+       LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);

 }
 
 /** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready
 }
 
 /** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready


@@ -108,17 +207,12 @@ void SetupHardware(void)
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
        /* Setup CDC Notification, Rx and Tx Endpoints */
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
        /* Setup CDC Notification, Rx and Tx Endpoints */

-       Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT,
-                                  ENDPOINT_DIR_IN, CDC_NOTIFICATION_EPSIZE,
-                                  ENDPOINT_BANK_SINGLE);
+       Endpoint_ConfigureEndpoint(CDC_NOTIFICATION_EPADDR, EP_TYPE_INTERRUPT,
+                                  CDC_NOTIFICATION_EPSIZE, 1);

 
 

-       Endpoint_ConfigureEndpoint(CDC_TX_EPNUM, EP_TYPE_BULK,
-                                  ENDPOINT_DIR_IN, CDC_TXRX_EPSIZE,
-                                  ENDPOINT_BANK_SINGLE);
+       Endpoint_ConfigureEndpoint(CDC_TX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);

 
 

-       Endpoint_ConfigureEndpoint(CDC_RX_EPNUM, EP_TYPE_BULK,
-                                  ENDPOINT_DIR_OUT, CDC_TXRX_EPSIZE,
-                                  ENDPOINT_BANK_SINGLE);
+       Endpoint_ConfigureEndpoint(CDC_RX_EPADDR, EP_TYPE_BULK, CDC_TXRX_EPSIZE, 1);

 }
 
 /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to
 }
 
 /** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to


@@ -127,46 +221,64 @@ void EVENT_USB_Device_ConfigurationChanged(void)
  */
 void EVENT_USB_Device_ControlRequest(void)
 {
  */
 void EVENT_USB_Device_ControlRequest(void)
 {

+       /* Ignore any requests that aren't directed to the CDC interface */
+       if ((USB_ControlRequest.bmRequestType & (CONTROL_REQTYPE_TYPE | CONTROL_REQTYPE_RECIPIENT)) !=
+           (REQTYPE_CLASS | REQREC_INTERFACE))
+       {
+               return;
+       }
+
+       /* Activity - toggle indicator LEDs */
+       LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
+

        /* Process CDC specific control requests */
        switch (USB_ControlRequest.bRequest)
        {
        /* Process CDC specific control requests */
        switch (USB_ControlRequest.bRequest)
        {

-               case REQ_GetLineEncoding:
+               case CDC_REQ_GetLineEncoding:

                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
                        {
                                Endpoint_ClearSETUP();
 
                                /* Write the line coding data to the control endpoint */
                        if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
                        {
                                Endpoint_ClearSETUP();
 
                                /* Write the line coding data to the control endpoint */

-                               Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
+                               Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));

                                Endpoint_ClearOUT();
                        }
 
                        break;
                                Endpoint_ClearOUT();
                        }
 
                        break;

-               case REQ_SetLineEncoding:
+               case CDC_REQ_SetLineEncoding:

                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
                        {
                                Endpoint_ClearSETUP();
 
                                /* Read the line coding data in from the host into the global struct */
                        if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
                        {
                                Endpoint_ClearSETUP();
 
                                /* Read the line coding data in from the host into the global struct */

-                               Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));
+                               Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_LineEncoding_t));

                                Endpoint_ClearIN();
                        }
 
                        break;
                                Endpoint_ClearIN();
                        }
 
                        break;

+        case CDC_REQ_SetControlLineState:
+               if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
+               {
+                   Endpoint_ClearSETUP();
+                   Endpoint_ClearStatusStage();
+               }
+
+               break;

        }
 }
 
 #if !defined(NO_BLOCK_SUPPORT)
 /** Reads or writes a block of EEPROM or FLASH memory to or from the appropriate CDC data endpoint, depending
        }
 }
 
 #if !defined(NO_BLOCK_SUPPORT)
 /** Reads or writes a block of EEPROM or FLASH memory to or from the appropriate CDC data endpoint, depending

- *  on the AVR910 protocol command issued.
+ *  on the AVR109 protocol command issued.

  *
  *

- *  \param[in] Command  Single character AVR910 protocol command indicating what memory operation to perform
+ *  \param[in] Command  Single character AVR109 protocol command indicating what memory operation to perform

  */
 static void ReadWriteMemoryBlock(const uint8_t Command)
 {
        uint16_t BlockSize;
        char     MemoryType;
 
  */
 static void ReadWriteMemoryBlock(const uint8_t Command)
 {
        uint16_t BlockSize;
        char     MemoryType;
 

-       bool     HighByte = false;
+       uint8_t  HighByte = 0;

        uint8_t  LowByte  = 0;
 
        BlockSize  = (FetchNextCommandByte() << 8);
        uint8_t  LowByte  = 0;
 
        BlockSize  = (FetchNextCommandByte() << 8);


@@ -174,7 +286,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
 
        MemoryType =  FetchNextCommandByte();
 
 
        MemoryType =  FetchNextCommandByte();
 

-       if ((MemoryType != 'E') && (MemoryType != 'F'))
+       if ((MemoryType != MEMORY_TYPE_FLASH) && (MemoryType != MEMORY_TYPE_EEPROM))

        {
                /* Send error byte back to the host */
                WriteNextResponseByte('?');
        {
                /* Send error byte back to the host */
                WriteNextResponseByte('?');


@@ -182,15 +294,15 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
                return;
        }
 
                return;
        }
 

-       /* Check if command is to read memory */
-       if (Command == 'g')
+       /* Check if command is to read a memory block */
+       if (Command == AVR109_COMMAND_BlockRead)

        {
                /* Re-enable RWW section */
                boot_rww_enable();
 
                while (BlockSize--)
                {
        {
                /* Re-enable RWW section */
                boot_rww_enable();
 
                while (BlockSize--)
                {

-                       if (MemoryType == 'F')
+                       if (MemoryType == MEMORY_TYPE_FLASH)

                        {
                                /* Read the next FLASH byte from the current FLASH page */
                                #if (FLASHEND > 0xFFFF)
                        {
                                /* Read the next FLASH byte from the current FLASH page */
                                #if (FLASHEND > 0xFFFF)


@@ -219,7 +331,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
        {
                uint32_t PageStartAddress = CurrAddress;
 
        {
                uint32_t PageStartAddress = CurrAddress;
 

-               if (MemoryType == 'F')
+               if (MemoryType == MEMORY_TYPE_FLASH)

                {
                        boot_page_erase(PageStartAddress);
                        boot_spm_busy_wait();
                {
                        boot_page_erase(PageStartAddress);
                        boot_spm_busy_wait();


@@ -227,7 +339,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
 
                while (BlockSize--)
                {
 
                while (BlockSize--)
                {

-                       if (MemoryType == 'F')
+                       if (MemoryType == MEMORY_TYPE_FLASH)

                        {
                                /* If both bytes in current word have been written, increment the address counter */
                                if (HighByte)
                        {
                                /* If both bytes in current word have been written, increment the address counter */
                                if (HighByte)


@@ -242,7 +354,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
                                {
                                        LowByte = FetchNextCommandByte();
                                }
                                {
                                        LowByte = FetchNextCommandByte();
                                }

-                               
+

                                HighByte = !HighByte;
                        }
                        else
                                HighByte = !HighByte;
                        }
                        else


@@ -256,7 +368,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
                }
 
                /* If in FLASH programming mode, commit the page after writing */
                }
 
                /* If in FLASH programming mode, commit the page after writing */

-               if (MemoryType == 'F')
+               if (MemoryType == MEMORY_TYPE_FLASH)

                {
                        /* Commit the flash page to memory */
                        boot_page_write(PageStartAddress);
                {
                        /* Commit the flash page to memory */
                        boot_page_write(PageStartAddress);


@@ -279,7 +391,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
 static uint8_t FetchNextCommandByte(void)
 {
        /* Select the OUT endpoint so that the next data byte can be read */
 static uint8_t FetchNextCommandByte(void)
 {
        /* Select the OUT endpoint so that the next data byte can be read */

-       Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_RX_EPADDR);

 
        /* If OUT endpoint empty, clear it and wait for the next packet from the host */
        while (!(Endpoint_IsReadWriteAllowed()))
 
        /* If OUT endpoint empty, clear it and wait for the next packet from the host */
        while (!(Endpoint_IsReadWriteAllowed()))


@@ -294,7 +406,7 @@ static uint8_t FetchNextCommandByte(void)
        }
 
        /* Fetch the next byte from the OUT endpoint */
        }
 
        /* Fetch the next byte from the OUT endpoint */

-       return Endpoint_Read_Byte();
+       return Endpoint_Read_8();

 }
 
 /** Writes the next response byte to the CDC data IN endpoint, and sends the endpoint back if needed to free up the
 }
 
 /** Writes the next response byte to the CDC data IN endpoint, and sends the endpoint back if needed to free up the


@@ -305,7 +417,7 @@ static uint8_t FetchNextCommandByte(void)
 static void WriteNextResponseByte(const uint8_t Response)
 {
        /* Select the IN endpoint so that the next data byte can be written */
 static void WriteNextResponseByte(const uint8_t Response)
 {
        /* Select the IN endpoint so that the next data byte can be written */

-       Endpoint_SelectEndpoint(CDC_TX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_TX_EPADDR);

 
        /* If IN endpoint full, clear it and wait until ready for the next packet to the host */
        if (!(Endpoint_IsReadWriteAllowed()))
 
        /* If IN endpoint full, clear it and wait until ready for the next packet to the host */
        if (!(Endpoint_IsReadWriteAllowed()))


@@ -320,16 +432,16 @@ static void WriteNextResponseByte(const uint8_t Response)
        }
 
        /* Write the next byte to the IN endpoint */
        }
 
        /* Write the next byte to the IN endpoint */

-       Endpoint_Write_Byte(Response);
+       Endpoint_Write_8(Response);

 }
 
 }
 

-/** Task to read in AVR910 commands from the CDC data OUT endpoint, process them, perform the required actions
+/** Task to read in AVR109 commands from the CDC data OUT endpoint, process them, perform the required actions

  *  and send the appropriate response back to the host.
  */
  *  and send the appropriate response back to the host.
  */

-void CDC_Task(void)
+static void CDC_Task(void)

 {
        /* Select the OUT endpoint */
 {
        /* Select the OUT endpoint */

-       Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_RX_EPADDR);

 
        /* Check if endpoint has a command in it sent from the host */
        if (!(Endpoint_IsOUTReceived()))
 
        /* Check if endpoint has a command in it sent from the host */
        if (!(Endpoint_IsOUTReceived()))


@@ -338,71 +450,72 @@ void CDC_Task(void)
        /* Read in the bootloader command (first byte sent from host) */
        uint8_t Command = FetchNextCommandByte();
 
        /* Read in the bootloader command (first byte sent from host) */
        uint8_t Command = FetchNextCommandByte();
 

-       if (Command == 'E')
+       if (Command == AVR109_COMMAND_ExitBootloader)

        {
                RunBootloader = false;
        {
                RunBootloader = false;

-       
+

                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if (Command == 'T')
+       else if ((Command == AVR109_COMMAND_SetLED) || (Command == AVR109_COMMAND_ClearLED) ||
+                (Command == AVR109_COMMAND_SelectDeviceType))

        {
                FetchNextCommandByte();
 
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
        {
                FetchNextCommandByte();
 
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if ((Command == 'L') || (Command == 'P'))
+       else if ((Command == AVR109_COMMAND_EnterProgrammingMode) || (Command == AVR109_COMMAND_LeaveProgrammingMode))

        {
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
        {
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if (Command == 't')
+       else if (Command == AVR109_COMMAND_ReadPartCode)

        {
                /* Return ATMEGA128 part code - this is only to allow AVRProg to use the bootloader */
                WriteNextResponseByte(0x44);
                WriteNextResponseByte(0x00);
        }
        {
                /* Return ATMEGA128 part code - this is only to allow AVRProg to use the bootloader */
                WriteNextResponseByte(0x44);
                WriteNextResponseByte(0x00);
        }

-       else if (Command == 'a')
+       else if (Command == AVR109_COMMAND_ReadAutoAddressIncrement)

        {
                /* Indicate auto-address increment is supported */
                WriteNextResponseByte('Y');
        }
        {
                /* Indicate auto-address increment is supported */
                WriteNextResponseByte('Y');
        }

-       else if (Command == 'A')
+       else if (Command == AVR109_COMMAND_SetCurrentAddress)

        {
        {

-               /* Set the current address to that given by the host */
+               /* Set the current address to that given by the host (translate 16-bit word address to byte address) */

                CurrAddress   = (FetchNextCommandByte() << 9);
                CurrAddress  |= (FetchNextCommandByte() << 1);
 
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
                CurrAddress   = (FetchNextCommandByte() << 9);
                CurrAddress  |= (FetchNextCommandByte() << 1);
 
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if (Command == 'p')
+       else if (Command == AVR109_COMMAND_ReadBootloaderInterface)

        {
                /* Indicate serial programmer back to the host */
                WriteNextResponseByte('S');
        }
        {
                /* Indicate serial programmer back to the host */
                WriteNextResponseByte('S');
        }

-       else if (Command == 'S')
+       else if (Command == AVR109_COMMAND_ReadBootloaderIdentifier)

        {
                /* Write the 7-byte software identifier to the endpoint */
                for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++)
                  WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]);
        }
        {
                /* Write the 7-byte software identifier to the endpoint */
                for (uint8_t CurrByte = 0; CurrByte < 7; CurrByte++)
                  WriteNextResponseByte(SOFTWARE_IDENTIFIER[CurrByte]);
        }

-       else if (Command == 'V')
+       else if (Command == AVR109_COMMAND_ReadBootloaderSWVersion)

        {
                WriteNextResponseByte('0' + BOOTLOADER_VERSION_MAJOR);
                WriteNextResponseByte('0' + BOOTLOADER_VERSION_MINOR);
        }
        {
                WriteNextResponseByte('0' + BOOTLOADER_VERSION_MAJOR);
                WriteNextResponseByte('0' + BOOTLOADER_VERSION_MINOR);
        }

-       else if (Command == 's')
+       else if (Command == AVR109_COMMAND_ReadSignature)

        {
                WriteNextResponseByte(AVR_SIGNATURE_3);
                WriteNextResponseByte(AVR_SIGNATURE_2);
                WriteNextResponseByte(AVR_SIGNATURE_1);
        }
        {
                WriteNextResponseByte(AVR_SIGNATURE_3);
                WriteNextResponseByte(AVR_SIGNATURE_2);
                WriteNextResponseByte(AVR_SIGNATURE_1);
        }

-       else if (Command == 'e')
+       else if (Command == AVR109_COMMAND_EraseFLASH)

        {
                /* Clear the application section of flash */
        {
                /* Clear the application section of flash */

-               for (uint32_t CurrFlashAddress = 0; CurrFlashAddress < BOOT_START_ADDR; CurrFlashAddress += SPM_PAGESIZE)
+               for (uint32_t CurrFlashAddress = 0; CurrFlashAddress < (uint32_t)BOOT_START_ADDR; CurrFlashAddress += SPM_PAGESIZE)

                {
                        boot_page_erase(CurrFlashAddress);
                        boot_spm_busy_wait();
                {
                        boot_page_erase(CurrFlashAddress);
                        boot_spm_busy_wait();


@@ -414,7 +527,7 @@ void CDC_Task(void)
                WriteNextResponseByte('\r');
        }
        #if !defined(NO_LOCK_BYTE_WRITE_SUPPORT)
                WriteNextResponseByte('\r');
        }
        #if !defined(NO_LOCK_BYTE_WRITE_SUPPORT)

-       else if (Command == 'l')
+       else if (Command == AVR109_COMMAND_WriteLockbits)

        {
                /* Set the lock bits to those given by the host */
                boot_lock_bits_set(FetchNextCommandByte());
        {
                /* Set the lock bits to those given by the host */
                boot_lock_bits_set(FetchNextCommandByte());


@@ -423,24 +536,24 @@ void CDC_Task(void)
                WriteNextResponseByte('\r');
        }
        #endif
                WriteNextResponseByte('\r');
        }
        #endif

-       else if (Command == 'r')
+       else if (Command == AVR109_COMMAND_ReadLockbits)

        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS));
        }
        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOCK_BITS));
        }

-       else if (Command == 'F')
+       else if (Command == AVR109_COMMAND_ReadLowFuses)

        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS));
        }
        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_LOW_FUSE_BITS));
        }

-       else if (Command == 'N')
+       else if (Command == AVR109_COMMAND_ReadHighFuses)

        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS));
        }
        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_HIGH_FUSE_BITS));
        }

-       else if (Command == 'Q')
+       else if (Command == AVR109_COMMAND_ReadExtendedFuses)

        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS));
        }
        #if !defined(NO_BLOCK_SUPPORT)
        {
                WriteNextResponseByte(boot_lock_fuse_bits_get(GET_EXTENDED_FUSE_BITS));
        }
        #if !defined(NO_BLOCK_SUPPORT)

-       else if (Command == 'b')
+       else if (Command == AVR109_COMMAND_GetBlockWriteSupport)

        {
                WriteNextResponseByte('Y');
 
        {
                WriteNextResponseByte('Y');
 


@@ -448,14 +561,14 @@ void CDC_Task(void)
                WriteNextResponseByte(SPM_PAGESIZE >> 8);
                WriteNextResponseByte(SPM_PAGESIZE & 0xFF);
        }
                WriteNextResponseByte(SPM_PAGESIZE >> 8);
                WriteNextResponseByte(SPM_PAGESIZE & 0xFF);
        }

-       else if ((Command == 'B') || (Command == 'g'))
+       else if ((Command == AVR109_COMMAND_BlockWrite) || (Command == AVR109_COMMAND_BlockRead))

        {
                /* Delegate the block write/read to a separate function for clarity */
                ReadWriteMemoryBlock(Command);
        }
        #endif
        #if !defined(NO_FLASH_BYTE_SUPPORT)
        {
                /* Delegate the block write/read to a separate function for clarity */
                ReadWriteMemoryBlock(Command);
        }
        #endif
        #if !defined(NO_FLASH_BYTE_SUPPORT)

-       else if (Command == 'C')
+       else if (Command == AVR109_COMMAND_FillFlashPageWordHigh)

        {
                /* Write the high byte to the current flash page */
                boot_page_fill(CurrAddress, FetchNextCommandByte());
        {
                /* Write the high byte to the current flash page */
                boot_page_fill(CurrAddress, FetchNextCommandByte());


@@ -463,7 +576,7 @@ void CDC_Task(void)
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if (Command == 'c')
+       else if (Command == AVR109_COMMAND_FillFlashPageWordLow)

        {
                /* Write the low byte to the current flash page */
                boot_page_fill(CurrAddress | 0x01, FetchNextCommandByte());
        {
                /* Write the low byte to the current flash page */
                boot_page_fill(CurrAddress | 0x01, FetchNextCommandByte());


@@ -474,7 +587,7 @@ void CDC_Task(void)
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if (Command == 'm')
+       else if (Command == AVR109_COMMAND_WriteFlashPage)

        {
                /* Commit the flash page to memory */
                boot_page_write(CurrAddress);
        {
                /* Commit the flash page to memory */
                boot_page_write(CurrAddress);


@@ -485,7 +598,7 @@ void CDC_Task(void)
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if (Command == 'R')
+       else if (Command == AVR109_COMMAND_ReadFLASHWord)

        {
                #if (FLASHEND > 0xFFFF)
                uint16_t ProgramWord = pgm_read_word_far(CurrAddress);
        {
                #if (FLASHEND > 0xFFFF)
                uint16_t ProgramWord = pgm_read_word_far(CurrAddress);


@@ -498,7 +611,7 @@ void CDC_Task(void)
        }
        #endif
        #if !defined(NO_EEPROM_BYTE_SUPPORT)
        }
        #endif
        #if !defined(NO_EEPROM_BYTE_SUPPORT)

-       else if (Command == 'D')
+       else if (Command == AVR109_COMMAND_WriteEEPROM)

        {
                /* Read the byte from the endpoint and write it to the EEPROM */
                eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());
        {
                /* Read the byte from the endpoint and write it to the EEPROM */
                eeprom_write_byte((uint8_t*)((intptr_t)(CurrAddress >> 1)), FetchNextCommandByte());


@@ -509,7 +622,7 @@ void CDC_Task(void)
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }

-       else if (Command == 'd')
+       else if (Command == AVR109_COMMAND_ReadEEPROM)

        {
                /* Read the EEPROM byte and write it to the endpoint */
                WriteNextResponseByte(eeprom_read_byte((uint8_t*)((intptr_t)(CurrAddress >> 1))));
        {
                /* Read the EEPROM byte and write it to the endpoint */
                WriteNextResponseByte(eeprom_read_byte((uint8_t*)((intptr_t)(CurrAddress >> 1))));


@@ -518,14 +631,14 @@ void CDC_Task(void)
                CurrAddress += 2;
        }
        #endif
                CurrAddress += 2;
        }
        #endif

-       else if (Command != 27)
+       else if (Command != AVR109_COMMAND_Sync)

        {
                /* Unknown (non-sync) command, return fail code */
                WriteNextResponseByte('?');
        }
 
        /* Select the IN endpoint */
        {
                /* Unknown (non-sync) command, return fail code */
                WriteNextResponseByte('?');
        }
 
        /* Select the IN endpoint */

-       Endpoint_SelectEndpoint(CDC_TX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_TX_EPADDR);

 
        /* Remember if the endpoint is completely full before clearing it */
        bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());
 
        /* Remember if the endpoint is completely full before clearing it */
        bool IsEndpointFull = !(Endpoint_IsReadWriteAllowed());


@@ -553,7 +666,7 @@ void CDC_Task(void)
        }
 
        /* Select the OUT endpoint */
        }
 
        /* Select the OUT endpoint */

-       Endpoint_SelectEndpoint(CDC_RX_EPNUM);
+       Endpoint_SelectEndpoint(CDC_RX_EPADDR);

 
        /* Acknowledge the command from the host */
        Endpoint_ClearOUT();
 
        /* Acknowledge the command from the host */
        Endpoint_ClearOUT();