Remove unused makefile macro from the DFU bootloader.

[pub/USBasp.git] / LUFA / Drivers / USB / Core / Events.h

diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h
index 2ea14bf..f468b7e 100644 (file)
--- a/LUFA/Drivers/USB/Core/Events.h
+++ b/LUFA/Drivers/USB/Core/Events.h
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -183,17 +183,17 @@
                         *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
                         *  two seconds) will prevent the device from enumerating correctly.
                         *
                         *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
                         *  two seconds) will prevent the device from enumerating correctly.
                         *

+                        *  \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
+                        *             if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
+                        *

                         *  \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
                         *  \note For the microcontrollers with limited USB controller functionality, VBUS sensing is not available.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by

                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *
                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *

-                        *  \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
-                        *        if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
-                        *

                         *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
                         */
                        void EVENT_USB_Device_Connect(void);
                         *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
                         */
                        void EVENT_USB_Device_Connect(void);


@@ -201,23 +201,23 @@
                        /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is
                         *  disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin.
                         *
                        /** Event for USB device disconnection. This event fires when the microcontroller is in USB Device mode and the device is
                         *  disconnected from a host, measured by a falling level on the microcontroller's VBUS sense pin.
                         *

+                        *  \attention This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
+                        *             if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
+                        *

                         *  \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state
                         *  \note For the microcontrollers with limited USB controllers, VBUS sense is not available to the USB controller.
                         *        this means that the current connection state is derived from the bus suspension and wake up events by default,
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

-                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by
+                        *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behavior turned off by

                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *
                         *        passing the \c NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection
                         *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.
                         *        \n\n
                         *

-                        *  \note This event may fire multiple times during device enumeration on the microcontrollers with limited USB controllers
-                        *        if \c NO_LIMITED_CONTROLLER_CONNECT is not defined.
-                        *

                         *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
                         */
                        void EVENT_USB_Device_Disconnect(void);
 
                        /** Event for control requests. This event fires when a the USB host issues a control request
                         *  \see \ref Group_USBManagement for more information on the USB management task and reducing CPU usage.
                         */
                        void EVENT_USB_Device_Disconnect(void);
 
                        /** Event for control requests. This event fires when a the USB host issues a control request

-                        *  to the mandatory device control endpoint (of address 0). This may either be a standard 
+                        *  to the mandatory device control endpoint (of address 0). This may either be a standard

                         *  request that the library may have a handler code for internally, or a class specific request
                         *  issued to the device which must be handled appropriately. If a request is not processed in the
                         *  user application via this event, it will be passed to the library for processing internally
                         *  request that the library may have a handler code for internally, or a class specific request
                         *  issued to the device which must be handled appropriately. If a request is not processed in the
                         *  user application via this event, it will be passed to the library for processing internally


@@ -249,7 +249,7 @@
                         *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
                         *  one second) will prevent the device from enumerating correctly.
                         *
                         *  This event is time-critical; exceeding OS-specific delays within this event handler (typically of around
                         *  one second) will prevent the device from enumerating correctly.
                         *

-                        *  This event fires after the value of \ref USB_ConfigurationNumber has been changed.
+                        *  This event fires after the value of \ref USB_Device_ConfigurationNumber has been changed.

                         *
                         *  \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
                         *        \ref Group_USBManagement documentation).
                         *
                         *  \note This event does not exist if the \c USB_HOST_ONLY token is supplied to the compiler (see
                         *        \ref Group_USBManagement documentation).