*/
/** \ingroup Group_USBClassPrinter
- * @defgroup Group_USBClassPrinterHost Printer Class Host Mode Driver
+ * \defgroup Group_USBClassPrinterHost Printer Class Host Mode Driver
*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
#error Do not include this file directly. Include LUFA/Drivers/USB.h instead.
#endif
- #if defined(__INCLUDE_FROM_PRINTER_HOST_C) && defined(NO_STREAM_CALLBACKS)
- #error The NO_STREAM_CALLBACKS compile time option cannot be used in projects using the library Class drivers.
- #endif
-
/* Public Interface - May be used in end-application: */
/* Type Defines: */
/** \brief Printer Class Host Mode Configuration and State Structure.
};
/* Function Prototypes: */
- /** General management task for a given Printer host class interface, required for the correct operation of
- * the interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
- */
- void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
-
/** Host interface configuration routine, to configure a given Printer host interface instance using the
* Configuration Descriptor read from an attached USB device. This function automatically updates the given Printer
* instance's state values and configures the pipes required to communicate with the interface if it is found within
* the device. This should be called once after the stack has enumerated the attached device, while the host state
* machine is in the Addressed state.
*
- * \note The pipe index numbers as given in the interface's configuration structure must not overlap with any other
- * interface, or pipe bank corruption will occur. Gaps in the allocated pipe numbers or non-sequential indexes
- * within a single interface is allowed, but no two interfaces of any type have have interleaved pipe indexes.
- *
* \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
* \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
* \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor.
uint16_t ConfigDescriptorSize,
void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
+ /** General management task for a given Printer host class interface, required for the correct operation of
+ * the interface. This should be called frequently in the main program loop, before the master USB management task
+ * \ref USB_USBTask().
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ */
+ void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
/** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called
* once the connected device's configuration has been set, to ensure the printer is ready to accept commands.
*
*/
uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+ /** Sends the given null terminated string to the attached printer's input endpoint.
+ *
+ * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[in] String Pointer to a null terminated string to send.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ void* String) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
/** Sends the given raw data stream to the attached printer's input endpoint. This should contain commands that the
* printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see
* \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer.
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
- void* Buffer,
- const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+ uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ void* Buffer,
+ const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
* byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
#if !defined(__DOXYGEN__)
/* Function Prototypes: */
#if defined(__INCLUDE_FROM_PRINTER_HOST_C)
- static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
- static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor) ATTR_NON_NULL_PTR_ARG(1);
+ static uint8_t DCOMP_PRNT_Host_NextPRNTInterface(void* const CurrentDescriptor)
+ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
+ static uint8_t DCOMP_PRNT_Host_NextPRNTInterfaceEndpoint(void* const CurrentDescriptor)
+ ATTR_WARN_UNUSED_RESULT ATTR_NON_NULL_PTR_ARG(1);
#endif
#endif
projects / pub / USBasp.git / blobdiff