Removed all binary constants and replaced with decimal or hexadecimal constants so...

[pub/USBasp.git] / LUFA / Drivers / USB / LowLevel / Pipe.h

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h
index a4fdcfd..46a10e4 100644 (file)
--- a/LUFA/Drivers/USB/LowLevel/Pipe.h
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.h
@@ -74,17 +74,17 @@
                        /** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes),\r
                         *  which will trigger a control request on the attached device when data is written to the pipe.\r
                         */\r
                        /** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes),\r
                         *  which will trigger a control request on the attached device when data is written to the pipe.\r
                         */\r

-                       #define PIPE_TOKEN_SETUP                (0b00 << PTOKEN0)\r
+                       #define PIPE_TOKEN_SETUP                (0 << PTOKEN0)\r

 \r
                        /** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),\r
                         *  indicating that the pipe data will flow from device to host.\r
                         */\r
 \r
                        /** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),\r
                         *  indicating that the pipe data will flow from device to host.\r
                         */\r

-                       #define PIPE_TOKEN_IN                   (0b01 << PTOKEN0)\r
+                       #define PIPE_TOKEN_IN                   (1 << PTOKEN0)\r

 \r
                        /** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),\r
                         *  indicating that the pipe data will flow from host to device.\r
                         */\r
 \r
                        /** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),\r
                         *  indicating that the pipe data will flow from host to device.\r
                         */\r

-                       #define PIPE_TOKEN_OUT                  (0b10 << PTOKEN0)\r
+                       #define PIPE_TOKEN_OUT                  (2 << PTOKEN0)\r

 \r
                        /** Mask for the bank mode selection for the Pipe_ConfigurePipe() macro. This indicates that the pipe\r
                         *  should have one single bank, which requires less USB FIFO memory but results in slower transfers as\r
 \r
                        /** Mask for the bank mode selection for the Pipe_ConfigurePipe() macro. This indicates that the pipe\r
                         *  should have one single bank, which requires less USB FIFO memory but results in slower transfers as\r