Minor updates to the Benito programmer - remove redundant PORT register manipulations.

[pub/USBasp.git] / Projects / Magstripe / makefile

diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index 80b1744..dda15ac 100644 (file)
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -101,7 +101,7 @@ F_CPU = 16000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = 16000000
+F_CLOCK = $(F_CPU)
 
 
 # Output format. (can be srec, ihex, binary)
@@ -122,6 +122,15 @@ OBJDIR = .
 LUFA_PATH = ../..
 
 
+# LUFA library compile-time options
+LUFA_OPTS  = -D USE_NONSTANDARD_DESCRIPTOR_NAMES
+LUFA_OPTS += -D USB_DEVICE_ONLY
+LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
+LUFA_OPTS += -D TOTAL_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
+LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+
+
 # List C source files here. (C dependencies are automatically generated.)
 SRC = $(TARGET).c                                                 \
          Descriptors.c                                               \
@@ -137,6 +146,7 @@ SRC = $(TARGET).c                                                 \
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
          $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
          $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c            \
+         $(LUFA_PATH)/LUFA/Drivers/USB/Class/Host/HID.c              \
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
@@ -182,10 +192,7 @@ CSTANDARD = -std=gnu99
 
 
 # Place -D or -U options here for C sources
-CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD)
-CDEFS += -DUSE_NONSTANDARD_DESCRIPTOR_NAMES -DUSB_DEVICE_ONLY
-CDEFS += -DFIXED_CONTROL_ENDPOINT_SIZE=8 -DUSE_SINGLE_DEVICE_CONFIGURATION
-CDEFS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
+CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
 CDEFS += -DMAG_T1_CLOCK="(1 << 0)"
 CDEFS += -DMAG_T1_DATA="(1 << 1)"
 CDEFS += -DMAG_T2_CLOCK="(1 << 2)"