Fixed compilation error in the AudioInput demos when MICROPHONE_BIASED_TO_HALF_RAIL...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGProtocol.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index 24305dc..07dce50 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -119,14 +119,14 @@ static void XPROGProtocol_EnterXPROGMode(void)
        {\r
                /* Enable PDI programming mode with the attached target */\r
                XPROGTarget_EnableTargetPDI();\r
-               \r
+\r
                /* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */\r
                XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);     \r
                XPROGTarget_SendByte(PDI_RESET_KEY);\r
 \r
-               /* Lower direction change guard time to 8 USART bits */\r
+               /* Lower direction change guard time to 0 USART bits */\r
                XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);      \r
-               XPROGTarget_SendByte(0x04);\r
+               XPROGTarget_SendByte(0x07);\r
 \r
                /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */\r
                XPROGTarget_SendByte(PDI_CMD_KEY);      \r
@@ -141,9 +141,9 @@ static void XPROGProtocol_EnterXPROGMode(void)
                /* Enable TPI programming mode with the attached target */\r
                XPROGTarget_EnableTargetTPI();\r
                \r
-               /* Lower direction change guard time to 8 USART bits */\r
+               /* Lower direction change guard time to 0 USART bits */\r
                XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);\r
-               XPROGTarget_SendByte(0x04);\r
+               XPROGTarget_SendByte(0x07);\r
                \r
                /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */\r
                XPROGTarget_SendByte(TPI_CMD_SKEY);     \r
@@ -170,6 +170,8 @@ static void XPROGProtocol_LeaveXPROGMode(void)
        \r
        if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)\r
        {\r
+               XMEGANVM_WaitWhileNVMBusBusy();\r
+\r
                /* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */\r
                XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);     \r
                XPROGTarget_SendByte(0x00);\r
@@ -178,6 +180,8 @@ static void XPROGProtocol_LeaveXPROGMode(void)
        }\r
        else\r
        {\r
+               TINYNVM_WaitWhileNVMBusBusy();\r
+\r
                /* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */\r
                XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);     \r
                XPROGTarget_SendByte(0x00);\r
@@ -208,10 +212,10 @@ static void XPROGProtocol_Erase(void)
        Endpoint_ClearOUT();\r
        Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);\r
        \r
+       uint8_t EraseCommand;\r
+\r
        if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)\r
-       {\r
-               uint8_t EraseCommand = XMEGA_NVM_CMD_NOOP;\r
-       \r
+       {       \r
                /* Determine which NVM command to send to the device depending on the memory to erase */\r
                switch (Erase_XPROG_Params.MemoryType)\r
                {\r
@@ -239,6 +243,9 @@ static void XPROGProtocol_Erase(void)
                        case XPRG_ERASE_USERSIG:\r
                                EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;\r
                                break;\r
+                       default:\r
+                               EraseCommand = XMEGA_NVM_CMD_NOOP;\r
+                               break;\r
                }\r
                \r
                /* Erase the target memory, indicate timeout if ocurred */\r
@@ -247,8 +254,13 @@ static void XPROGProtocol_Erase(void)
        }\r
        else\r
        {\r
+               if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)\r
+                 EraseCommand = TINY_NVM_CMD_CHIPERASE;\r
+               else\r
+                 EraseCommand = TINY_NVM_CMD_SECTIONERASE;\r
+       \r
                /* Erase the target memory, indicate timeout if ocurred */\r
-               if (!(TINYNVM_EraseMemory(TINY_NVM_CMD_CHIPERASE, Erase_XPROG_Params.Address)))\r
+               if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))\r
                  ReturnStatus = XPRG_ERR_TIMEOUT;\r
        }\r
        \r