Fixed AVRISP-MKII Clone failing to start application firmware once a TPI programming...

[pub/USBasp.git] / Projects / Incomplete / StandaloneProgrammer / Lib / SCSI.c

diff --git a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c
index d36d887..04469ca 100644 (file)
--- a/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c
+++ b/Projects/Incomplete/StandaloneProgrammer/Lib/SCSI.c
@@ -155,8 +155,7 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
 static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
 {
        uint16_t AllocationLength  = SwapEndian_16(*(uint16_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[3]);
-       uint16_t BytesTransferred  = (AllocationLength < sizeof(InquiryData))? AllocationLength :
-                                                                              sizeof(InquiryData);
+       uint16_t BytesTransferred  = MIN(AllocationLength, sizeof(InquiryData));
 
        /* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
        if ((MSInterfaceInfo->State.CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
@@ -194,7 +193,7 @@ static bool SCSI_Command_Inquiry(USB_ClassInfo_MS_Device_t* const MSInterfaceInf
 static bool SCSI_Command_Request_Sense(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
 {
        uint8_t  AllocationLength = MSInterfaceInfo->State.CommandBlock.SCSICommandData[4];
-       uint8_t  BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData);
+       uint8_t  BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
 
        Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
        Endpoint_Null_Stream((AllocationLength - BytesTransferred), NULL);
@@ -331,10 +330,10 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa
 static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo)
 {
        /* Send an empty header response with the Write Protect flag status */
-       Endpoint_Write_Byte(0x00);
-       Endpoint_Write_Byte(0x00);
-       Endpoint_Write_Byte(DISK_READ_ONLY ? 0x80 : 0x00);
-       Endpoint_Write_Byte(0x00);
+       Endpoint_Write_8(0x00);
+       Endpoint_Write_8(0x00);
+       Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
+       Endpoint_Write_8(0x00);
        Endpoint_ClearIN();
 
        /* Update the bytes transferred counter and succeed the command */