Fix XMEGA architecture not correctly resetting the device address and endpoints in...

[pub/USBasp.git] / Bootloaders / CDC / BootloaderCDC.c

diff --git a/Bootloaders/CDC/BootloaderCDC.c b/Bootloaders/CDC/BootloaderCDC.c
index 99e0ccb..e9ea8ae 100644 (file)
--- a/Bootloaders/CDC/BootloaderCDC.c
+++ b/Bootloaders/CDC/BootloaderCDC.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -66,6 +66,9 @@ int main(void)
        /* Setup hardware required for the bootloader */
        SetupHardware();
 
+       /* Turn on first LED on the board to indicate that the bootloader has started */
+       LEDs_SetAllLEDs(LEDS_LED1);
+
        /* Enable global interrupts so that the USB stack can function */
        sei();
 
@@ -85,7 +88,7 @@ int main(void)
 }
 
 /** Configures all hardware required for the bootloader. */
-void SetupHardware(void)
+static void SetupHardware(void)
 {
        /* Disable watchdog if enabled by bootloader/fuses */
        MCUSR &= ~(1 << WDRF);
@@ -98,8 +101,19 @@ void SetupHardware(void)
        MCUCR = (1 << IVCE);
        MCUCR = (1 << IVSEL);
 
-       /* Initialize USB Subsystem */
+       /* Initialize the USB and other board hardware drivers */
        USB_Init();
+       LEDs_Init();
+
+       /* Bootloader active LED toggle timer initialization */
+       TIMSK1 = (1 << TOIE1);
+       TCCR1B = ((1 << CS11) | (1 << CS10));
+}
+
+/** ISR to periodically toggle the LEDs on the board to indicate that the bootloader is active. */
+ISR(TIMER1_OVF_vect, ISR_BLOCK)
+{
+       LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
 }
 
 /** Event handler for the USB_ConfigurationChanged event. This configures the device's endpoints ready
@@ -134,6 +148,9 @@ void EVENT_USB_Device_ControlRequest(void)
                return;
        }
 
+       /* Activity - toggle indicator LEDs */
+       LEDs_ToggleLEDs(LEDS_LED1 | LEDS_LED2);
+
        /* Process CDC specific control requests */
        switch (USB_ControlRequest.bRequest)
        {
@@ -249,7 +266,7 @@ static void ReadWriteMemoryBlock(const uint8_t Command)
                                {
                                        LowByte = FetchNextCommandByte();
                                }
-                               
+
                                HighByte = !HighByte;
                        }
                        else
@@ -301,7 +318,7 @@ static uint8_t FetchNextCommandByte(void)
        }
 
        /* Fetch the next byte from the OUT endpoint */
-       return Endpoint_Read_Byte();
+       return Endpoint_Read_8();
 }
 
 /** Writes the next response byte to the CDC data IN endpoint, and sends the endpoint back if needed to free up the
@@ -327,13 +344,13 @@ static void WriteNextResponseByte(const uint8_t Response)
        }
 
        /* Write the next byte to the IN endpoint */
-       Endpoint_Write_Byte(Response);
+       Endpoint_Write_8(Response);
 }
 
 /** Task to read in AVR910 commands from the CDC data OUT endpoint, process them, perform the required actions
  *  and send the appropriate response back to the host.
  */
-void CDC_Task(void)
+static void CDC_Task(void)
 {
        /* Select the OUT endpoint */
        Endpoint_SelectEndpoint(CDC_RX_EPNUM);
@@ -348,7 +365,7 @@ void CDC_Task(void)
        if (Command == 'E')
        {
                RunBootloader = false;
-       
+
                /* Send confirmation byte back to the host */
                WriteNextResponseByte('\r');
        }