/*
LUFA Library
- Copyright (C) Dean Camera, 2011.
+ Copyright (C) Dean Camera, 2018.
dean [at] fourwalledcubicle [dot] com
www.lufa-lib.org
*/
/*
- Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2018 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
- The author disclaim all warranties with regard to this
+ The author disclaims all warranties with regard to this
software, including all implied warranties of merchantability
and fitness. In no event shall the author be liable for any
special, indirect or consequential damages or any damages
* to the appropriate SCSI command handling routine if the issued command is supported by the device, else it returns
* a command failure due to a ILLEGAL REQUEST.
*
- * \return Boolean true if the command completed successfully, false otherwise
+ * \return Boolean \c true if the command completed successfully, \c false otherwise
*/
bool SCSI_DecodeSCSICommand(void)
{
case SCSI_CMD_MODE_SENSE_6:
CommandSuccess = SCSI_Command_ModeSense_6();
break;
+ case SCSI_CMD_START_STOP_UNIT:
case SCSI_CMD_TEST_UNIT_READY:
case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL:
case SCSI_CMD_VERIFY_10:
/** Command processing for an issued SCSI INQUIRY command. This command returns information about the device's features
* and capabilities to the host.
*
- * \return Boolean true if the command completed successfully, false otherwise.
+ * \return Boolean \c true if the command completed successfully, \c false otherwise.
*/
static bool SCSI_Command_Inquiry(void)
{
uint16_t AllocationLength = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[3]);
- uint16_t BytesTransferred = (AllocationLength < sizeof(InquiryData))? AllocationLength :
- sizeof(InquiryData);
+ uint16_t BytesTransferred = MIN(AllocationLength, sizeof(InquiryData));
/* Only the standard INQUIRY data is supported, check if any optional INQUIRY bits set */
if ((CommandBlock.SCSICommandData[1] & ((1 << 0) | (1 << 1))) ||
/** Command processing for an issued SCSI REQUEST SENSE command. This command returns information about the last issued command,
* including the error code and additional error information so that the host can determine why a command failed to complete.
*
- * \return Boolean true if the command completed successfully, false otherwise.
+ * \return Boolean \c true if the command completed successfully, \c false otherwise.
*/
static bool SCSI_Command_Request_Sense(void)
{
uint8_t AllocationLength = CommandBlock.SCSICommandData[4];
- uint8_t BytesTransferred = (AllocationLength < sizeof(SenseData))? AllocationLength : sizeof(SenseData);
+ uint8_t BytesTransferred = MIN(AllocationLength, sizeof(SenseData));
/* Send the SENSE data - this indicates to the host the status of the last command */
Endpoint_Write_Stream_LE(&SenseData, BytesTransferred, NULL);
/** Command processing for an issued SCSI READ CAPACITY (10) command. This command returns information about the device's capacity
* on the selected Logical Unit (drive), as a number of OS-sized blocks.
*
- * \return Boolean true if the command completed successfully, false otherwise.
+ * \return Boolean \c true if the command completed successfully, \c false otherwise.
*/
static bool SCSI_Command_Read_Capacity_10(void)
{
/* Send the total number of logical blocks in the current LUN */
- Endpoint_Write_DWord_BE(LUN_MEDIA_BLOCKS - 1);
+ Endpoint_Write_32_BE(LUN_MEDIA_BLOCKS - 1);
/* Send the logical block size of the device (must be 512 bytes) */
- Endpoint_Write_DWord_BE(VIRTUAL_MEMORY_BLOCK_SIZE);
+ Endpoint_Write_32_BE(VIRTUAL_MEMORY_BLOCK_SIZE);
/* Check if the current command is being aborted by the host */
if (IsMassStoreReset)
* board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
* supported.
*
- * \return Boolean true if the command completed successfully, false otherwise.
+ * \return Boolean \c true if the command completed successfully, \c false otherwise.
*/
static bool SCSI_Command_Send_Diagnostic(void)
{
*
* \param[in] IsDataRead Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)
*
- * \return Boolean true if the command completed successfully, false otherwise.
+ * \return Boolean \c true if the command completed successfully, \c false otherwise.
*/
static bool SCSI_Command_ReadWrite_10(const bool IsDataRead)
{
SCSI_ASENSE_WRITE_PROTECTED,
SCSI_ASENSEQ_NO_QUALIFIER);
- return false;
+ return false;
}
BlockAddress = SwapEndian_32(*(uint32_t*)&CommandBlock.SCSICommandData[2]);
TotalBlocks = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[7]);
-
+
/* Check if the block address is outside the maximum allowable value for the LUN */
if (BlockAddress >= LUN_MEDIA_BLOCKS)
{
/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about
* the SCSI device, as well as the device's Write Protect status.
*
- * \return Boolean true if the command completed successfully, false otherwise.
+ * \return Boolean \c true if the command completed successfully, \c false otherwise.
*/
static bool SCSI_Command_ModeSense_6(void)
{
/* Send an empty header response with the Write Protect flag status */
- Endpoint_Write_Byte(0x00);
- Endpoint_Write_Byte(0x00);
- Endpoint_Write_Byte(DISK_READ_ONLY ? 0x80 : 0x00);
- Endpoint_Write_Byte(0x00);
+ Endpoint_Write_8(0x00);
+ Endpoint_Write_8(0x00);
+ Endpoint_Write_8(DISK_READ_ONLY ? 0x80 : 0x00);
+ Endpoint_Write_8(0x00);
Endpoint_ClearIN();
/* Update the bytes transferred counter and succeed the command */
return true;
}
+
projects / pub / USBasp.git / blobdiff