Added ENABLE_TELNET_SERVER compile time option to the Webserver project to disable...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / TINYNVM.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index c650f0d..a894793 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -37,7 +37,6 @@
 #include "TINYNVM.h"\r
 \r
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)\r
 #include "TINYNVM.h"\r
 \r
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)\r

-#warning TPI Protocol support is currently incomplete and is not suitable for general use.\r

 \r
 /** Sends the given pointer address to the target's TPI pointer register */\r
 static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)\r
 \r
 /** Sends the given pointer address to the target's TPI pointer register */\r
 static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)\r


@@ -51,22 +50,22 @@ static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)
 \r
 /** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written.\r
  *\r
 \r
 /** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written.\r
  *\r

- *  \param Address  6-bit I/O address to write to in the target's I/O memory space\r
+ *  \param[in] Address  6-bit I/O address to write to in the target's I/O memory space\r

  */\r
  */\r

-static void TINYNVM_SendReadNVMRegister(uint8_t Address)\r
+static void TINYNVM_SendReadNVMRegister(const uint8_t Address)\r

 {\r
 {\r

-       /* The TPI command for reading from the I/O space uses wierd addressing, where the I/O address's upper\r
+       /* The TPI command for reading from the I/O space uses strange addressing, where the I/O address's upper\r

         * two bits of the 6-bit address are shifted left once */\r
        XPROGTarget_SendByte(TPI_CMD_SIN | ((Address & 0x30) << 1) | (Address & 0x0F));\r
 }\r
 \r
 /** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read.\r
  *\r
         * two bits of the 6-bit address are shifted left once */\r
        XPROGTarget_SendByte(TPI_CMD_SIN | ((Address & 0x30) << 1) | (Address & 0x0F));\r
 }\r
 \r
 /** Sends a SOUT command to the target with the specified I/O address, ready for the data byte to be read.\r
  *\r

- *  \param Address  6-bit I/O address to read from in the target's I/O memory space\r
+ *  \param[in] Address  6-bit I/O address to read from in the target's I/O memory space\r

  */\r
  */\r

-static void TINYNVM_SendWriteNVMRegister(uint8_t Address)\r
+static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)\r

 {\r
 {\r

-       /* The TPI command for writing to the I/O space uses wierd addressing, where the I/O address's upper\r
+       /* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper\r

         * two bits of the 6-bit address are shifted left once */\r
        XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));\r
 }\r
         * two bits of the 6-bit address are shifted left once */\r
        XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));\r
 }\r


@@ -83,9 +82,19 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
                /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */\r
                XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);\r
                if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)\r
                /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */\r
                XPROGTarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);\r
                if (XPROGTarget_ReceiveByte() & TPI_STATUS_NVM)\r

-                 return true;\r
+               {\r
+                       TimeoutMSRemaining = COMMAND_TIMEOUT_MS;\r
+                       return true;\r
+               }\r
+\r
+               /* Manage software timeout */\r
+               if (TIFR0 & (1 << OCF0A))\r
+               {\r
+                       TIFR0 |= (1 << OCF0A);\r
+                       TimeoutMSRemaining--;\r
+               }\r

        }\r
        }\r

-       \r
+\r

        return false;\r
 }\r
 \r
        return false;\r
 }\r
 \r


@@ -99,12 +108,24 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
        /* Poll the STATUS register to check to see if NVM access has been enabled */\r
        while (TimeoutMSRemaining)\r
        {\r
        /* Poll the STATUS register to check to see if NVM access has been enabled */\r
        while (TimeoutMSRemaining)\r
        {\r

-               /* Send the SIN command to read the TPI STATUS register to see the NVM bus is active */\r
+               /* Send the SIN command to read the TPI STATUS register to see the NVM bus is busy */\r

                TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);\r
                TINYNVM_SendReadNVMRegister(XPROG_Param_NVMCSRRegAddr);\r

-               if (XPROGTarget_ReceiveByte() & (1 << 7))\r
-                 return true;\r
+\r
+               /* Check to see if the BUSY flag is still set */\r
+               if (!(XPROGTarget_ReceiveByte() & (1 << 7)))\r
+               {\r
+                       TimeoutMSRemaining = COMMAND_TIMEOUT_MS;\r
+                       return true;\r
+               }\r
+\r
+               /* Manage software timeout */\r
+               if (TIFR0 & (1 << OCF0A))\r
+               {\r
+                       TIFR0 |= (1 << OCF0A);\r
+                       TimeoutMSRemaining--;\r
+               }\r

        }\r
        }\r

-       \r
+\r

        return false;\r
 }\r
 \r
        return false;\r
 }\r
 \r


@@ -116,7 +137,7 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r

-bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize)\r
+bool TINYNVM_ReadMemory(const uint16_t ReadAddress, uint8_t* ReadBuffer, uint16_t ReadSize)\r

 {\r
        /* Wait until the NVM controller is no longer busy */\r
        if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r
 {\r
        /* Wait until the NVM controller is no longer busy */\r
        if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r


@@ -139,19 +160,23 @@ bool TINYNVM_ReadMemory(const uint32_t ReadAddress, uint8_t* ReadBuffer, uint16_
        return true;\r
 }\r
 \r
        return true;\r
 }\r
 \r

-/** Writes byte addressed memory to the target's memory spaces.\r
+/** Writes word addressed memory to the target's memory spaces.\r

  *\r
  *\r

- *  \param[in]  WriteAddress  Start address to write to within the target's address space\r
- *  \param[in]  WriteBuffer   Buffer to source data from\r
- *  \param[in]  WriteLength   Total number of bytes to write to the device\r
+ *  \param[in] WriteAddress  Start address to write to within the target's address space\r
+ *  \param[in] WriteBuffer   Buffer to source data from\r
+ *  \param[in] WriteLength   Total number of bytes to write to the device (must be an integer multiple of 2)\r

  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r
  *\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r

-bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t* WriteBuffer, uint16_t WriteLength)\r
+bool TINYNVM_WriteMemory(const uint16_t WriteAddress, uint8_t* WriteBuffer, uint16_t WriteLength)\r

 {\r
        /* Wait until the NVM controller is no longer busy */\r
        if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r
          return false;\r
 {\r
        /* Wait until the NVM controller is no longer busy */\r
        if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r
          return false;\r

+         \r
+       /* Must have an integer number of words to write - if extra byte, word-align via a dummy high byte */\r
+       if (WriteLength & 0x01)\r
+         WriteBuffer[WriteLength++] = 0xFF;\r

 \r
        /* Set the NVM control register to the WORD WRITE command for memory reading */\r
        TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);\r
 \r
        /* Set the NVM control register to the WORD WRITE command for memory reading */\r
        TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);\r


@@ -160,11 +185,22 @@ bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t* WriteBuffer
        /* Send the address of the location to write to */\r
        TINYNVM_SendPointerAddress(WriteAddress);\r
        \r
        /* Send the address of the location to write to */\r
        TINYNVM_SendPointerAddress(WriteAddress);\r
        \r

-       while (WriteLength--)\r
+       while (WriteLength)\r

        {\r
        {\r

-               /* Write the byte of data to the target */\r
+               /* Wait until the NVM controller is no longer busy */\r
+               if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r
+                 return false;\r
+\r
+               /* Write the low byte of data to the target */\r

                XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);\r
                XPROGTarget_SendByte(*(WriteBuffer++));\r
                XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);\r
                XPROGTarget_SendByte(*(WriteBuffer++));\r

+               \r
+               /* Write the high byte of data to the target */\r
+               XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT_PI);\r
+               XPROGTarget_SendByte(*(WriteBuffer++));\r
+\r
+               /* Need to decrement the write length twice, since we read out a whole word */\r
+               WriteLength -= 2;\r

        }\r
        \r
        return true;\r
        }\r
        \r
        return true;\r


@@ -172,20 +208,28 @@ bool TINYNVM_WriteMemory(const uint32_t WriteAddress, const uint8_t* WriteBuffer
 \r
 /** Erases the target's memory space.\r
  *\r
 \r
 /** Erases the target's memory space.\r
  *\r

+ *  \param[in] EraseCommand  NVM erase command to send to the device\r
+ *  \param[in] Address       Address inside the memory space to erase\r
+ *\r

  *  \return Boolean true if the command sequence complete successfully\r
  */\r
  *  \return Boolean true if the command sequence complete successfully\r
  */\r

-bool TINYNVM_EraseMemory(void)\r
+bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint16_t Address)\r

 {\r
        /* Wait until the NVM controller is no longer busy */\r
        if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r
          return false;\r
 \r
 {\r
        /* Wait until the NVM controller is no longer busy */\r
        if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r
          return false;\r
 \r

-       /* Set the NVM control register to the CHIP ERASE command to erase the target */\r
+       /* Set the NVM control register to the target memory erase command */\r

        TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);\r
        TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);\r

-       XPROGTarget_SendByte(TINY_NVM_CMD_CHIPERASE);   \r
+       XPROGTarget_SendByte(EraseCommand);\r

 \r
 \r

-       /* Wait until the NVM bus is ready again */\r
-       if (!(TINYNVM_WaitWhileNVMBusBusy()))\r
+       /* Write to a high byte location within the target address space to start the erase process */\r
+       TINYNVM_SendPointerAddress(Address | 0x0001);\r
+       XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);\r
+       XPROGTarget_SendByte(0x00);\r
+\r
+       /* Wait until the NVM controller is no longer busy */\r
+       if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r

          return false;\r
        \r
        return true;\r
          return false;\r
        \r
        return true;\r