Complete RNDIS Host Class driver code - add SendPacket function.

[pub/USBasp.git] / Demos / Device / LowLevel / CDC / CDC.c

diff --git a/Demos/Device/LowLevel/CDC/CDC.c b/Demos/Device/LowLevel/CDC/CDC.c
index ac0623a..444dc01 100644 (file)
--- a/Demos/Device/LowLevel/CDC/CDC.c
+++ b/Demos/Device/LowLevel/CDC/CDC.c
@@ -36,7 +36,6 @@
 \r
 #include "CDC.h"\r
 \r
 \r
 #include "CDC.h"\r
 \r

-/* Globals: */\r

 /** Contains the current baud rate and other settings of the virtual serial port. While this demo does not use\r
  *  the physical USART and thus does not use these settings, they must still be retained and returned to the host\r
  *  upon request or the host will assume the device is non-functional.\r
 /** Contains the current baud rate and other settings of the virtual serial port. While this demo does not use\r
  *  the physical USART and thus does not use these settings, they must still be retained and returned to the host\r
  *  upon request or the host will assume the device is non-functional.\r


@@ -45,41 +44,46 @@
  *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical\r
  *  serial link characteristics and instead sends and receives data in endpoint streams.\r
  */\r
  *  It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical\r
  *  serial link characteristics and instead sends and receives data in endpoint streams.\r
  */\r

-CDC_Line_Coding_t LineCoding = { .BaudRateBPS = 9600,\r
-                                 .CharFormat  = OneStopBit,\r
-                                 .ParityType  = Parity_None,\r
-                                 .DataBits    = 8            };\r
+CDC_Line_Coding_t LineEncoding = { .BaudRateBPS = 0,\r
+                                   .CharFormat  = OneStopBit,\r
+                                   .ParityType  = Parity_None,\r
+                                   .DataBits    = 8            };\r
+\r

 \r
 #if 0\r
 /* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in\r
  *       <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).\r
  */\r
        \r
 \r
 #if 0\r
 /* NOTE: Here you can set up a standard stream using the created virtual serial port, so that the standard stream functions in\r
  *       <stdio.h> can be used on the virtual serial port (e.g. fprintf(&USBSerial, "Test"); to print a string).\r
  */\r
        \r

-static int CDC_putchar (char c, FILE *stream)\r
-{\r
-       if (!(USB_IsConnected))\r
-         return -1;\r
-         \r
+static int CDC_putchar(char c, FILE *stream)\r
+{        \r

        Endpoint_SelectEndpoint(CDC_TX_EPNUM);\r
        Endpoint_SelectEndpoint(CDC_TX_EPNUM);\r

-       while (!(Endpoint_IsReadWriteAllowed()));\r
+\r
+       if (!(LineEncoding.BaudRateBPS))\r
+         return -1;\r
+       \r
+       if (Endpoint_WaitUntilReady())\r
+         return -1;\r
+\r

        Endpoint_Write_Byte(c);\r
        Endpoint_ClearIN();\r
        \r
        return 0;\r
 }\r
 \r
        Endpoint_Write_Byte(c);\r
        Endpoint_ClearIN();\r
        \r
        return 0;\r
 }\r
 \r

-static int CDC_getchar (FILE *stream)\r
+static int CDC_getchar(FILE *stream)\r

 {\r
        int c;\r
 {\r
        int c;\r

-         \r
+\r
+       if (!(LineEncoding.BaudRateBPS))\r
+         return -1;\r
+\r

        Endpoint_SelectEndpoint(CDC_RX_EPNUM);\r
        \r
        for (;;)\r
        {\r
        Endpoint_SelectEndpoint(CDC_RX_EPNUM);\r
        \r
        for (;;)\r
        {\r

-               if (!(USB_IsConnected))\r
+               if (Endpoint_WaitUntilReady())\r

                  return -1;\r
                  return -1;\r

-\r
-               while (!(Endpoint_IsReadWriteAllowed()));\r

        \r
                if (!(Endpoint_BytesInEndpoint()))\r
                {\r
        \r
                if (!(Endpoint_BytesInEndpoint()))\r
                {\r


@@ -133,7 +137,7 @@ void SetupHardware(void)
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
  *  starts the library USB task to begin the enumeration and USB management process.\r
  */\r

-void EVENT_USB_Connect(void)\r
+void EVENT_USB_Device_Connect(void)\r

 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
 {\r
        /* Indicate USB enumerating */\r
        LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r


@@ -142,7 +146,7 @@ void EVENT_USB_Connect(void)
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops the USB management and CDC management tasks.\r
  */\r
 /** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via\r
  *  the status LEDs and stops the USB management and CDC management tasks.\r
  */\r

-void EVENT_USB_Disconnect(void)\r
+void EVENT_USB_Device_Disconnect(void)\r

 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
 {\r
        /* Indicate USB not ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r


@@ -151,7 +155,7 @@ void EVENT_USB_Disconnect(void)
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
  *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.\r
  */\r
 /** Event handler for the USB_ConfigurationChanged event. This is fired when the host set the current configuration\r
  *  of the USB device after enumeration - the device endpoints are configured and the CDC management task started.\r
  */\r

-void EVENT_USB_ConfigurationChanged(void)\r
+void EVENT_USB_Device_ConfigurationChanged(void)\r

 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
 {\r
        /* Indicate USB connected and ready */\r
        LEDs_SetAllLEDs(LEDMASK_USB_READY);\r


@@ -177,16 +181,17 @@ void EVENT_USB_ConfigurationChanged(void)
        {\r
                LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
        }\r
        {\r
                LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
        }\r

+       \r
+       /* Reset line encoding baud rate so that the host knows to send new values */\r
+       LineEncoding.BaudRateBPS = 0;\r

 }\r
 \r
 }\r
 \r

-/** Event handler for the USB_UnhandledControlPacket event. This is used to catch standard and class specific\r
+/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r

  *  control requests that are not handled internally by the USB library (including the CDC control commands,\r
  *  which are all issued via the control endpoint), so that they can be handled appropriately for the application.\r
  */\r
  *  control requests that are not handled internally by the USB library (including the CDC control commands,\r
  *  which are all issued via the control endpoint), so that they can be handled appropriately for the application.\r
  */\r

-void EVENT_USB_UnhandledControlPacket(void)\r
+void EVENT_USB_Device_UnhandledControlRequest(void)\r

 {\r
 {\r

-       uint8_t* LineCodingData = (uint8_t*)&LineCoding;\r
-\r

        /* Process CDC specific control requests */\r
        switch (USB_ControlRequest.bRequest)\r
        {\r
        /* Process CDC specific control requests */\r
        switch (USB_ControlRequest.bRequest)\r
        {\r


@@ -197,7 +202,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                Endpoint_ClearSETUP();\r
 \r
                                /* Write the line coding data to the control endpoint */\r
                                Endpoint_ClearSETUP();\r
 \r
                                /* Write the line coding data to the control endpoint */\r

-                               Endpoint_Write_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));\r
+                               Endpoint_Write_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));\r

                                \r
                                /* Finalize the stream transfer to send the last packet or clear the host abort */\r
                                Endpoint_ClearOUT();\r
                                \r
                                /* Finalize the stream transfer to send the last packet or clear the host abort */\r
                                Endpoint_ClearOUT();\r


@@ -211,7 +216,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                Endpoint_ClearSETUP();\r
 \r
                                /* Read the line coding data in from the host into the global struct */\r
                                Endpoint_ClearSETUP();\r
 \r
                                /* Read the line coding data in from the host into the global struct */\r

-                               Endpoint_Read_Control_Stream_LE(LineCodingData, sizeof(CDC_Line_Coding_t));\r
+                               Endpoint_Read_Control_Stream_LE(&LineEncoding, sizeof(CDC_Line_Coding_t));\r

 \r
                                /* Finalize the stream transfer to clear the last packet from the host */\r
                                Endpoint_ClearIN();\r
 \r
                                /* Finalize the stream transfer to clear the last packet from the host */\r
                                Endpoint_ClearIN();\r


@@ -229,9 +234,7 @@ void EVENT_USB_UnhandledControlPacket(void)
                                                 CONTROL_LINE_OUT_* masks to determine the RTS and DTR line states using the following code:\r
                                */\r
                                \r
                                                 CONTROL_LINE_OUT_* masks to determine the RTS and DTR line states using the following code:\r
                                */\r
                                \r

-                               /* Acknowledge status stage */\r
-                               while (!(Endpoint_IsINReady()));\r
-                               Endpoint_ClearIN();\r
+                               Endpoint_ClearStatusStage();\r

                        }\r
        \r
                        break;\r
                        }\r
        \r
                        break;\r


@@ -244,16 +247,11 @@ void CDC_Task(void)
        char*       ReportString    = NULL;\r
        uint8_t     JoyStatus_LCL   = Joystick_GetStatus();\r
        static bool ActionSent      = false;\r
        char*       ReportString    = NULL;\r
        uint8_t     JoyStatus_LCL   = Joystick_GetStatus();\r
        static bool ActionSent      = false;\r

-\r
-       char* JoystickStrings[] =\r
-               {\r
-                       "Joystick Up\r\n",\r
-                       "Joystick Down\r\n",\r
-                       "Joystick Left\r\n",\r
-                       "Joystick Right\r\n",\r
-                       "Joystick Pressed\r\n",\r
-               };\r

        \r
        \r

+       /* Device must be connected and configured for the task to run */\r
+       if (USB_DeviceState != DEVICE_STATE_Configured)\r
+         return;\r
+         \r

 #if 0\r
        /* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232\r
         *       handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code:\r
 #if 0\r
        /* NOTE: Here you can use the notification endpoint to send back line state changes to the host, for the special RS-232\r
         *       handshake signal lines (and some error states), via the CONTROL_LINE_IN_* masks and the following code:\r


@@ -279,22 +277,20 @@ void CDC_Task(void)
 \r
        /* Determine if a joystick action has occurred */\r
        if (JoyStatus_LCL & JOY_UP)\r
 \r
        /* Determine if a joystick action has occurred */\r
        if (JoyStatus_LCL & JOY_UP)\r

-         ReportString = JoystickStrings[0];\r
+         ReportString = "Joystick Up\r\n";\r

        else if (JoyStatus_LCL & JOY_DOWN)\r
        else if (JoyStatus_LCL & JOY_DOWN)\r

-         ReportString = JoystickStrings[1];\r
+         ReportString = "Joystick Down\r\n";\r

        else if (JoyStatus_LCL & JOY_LEFT)\r
        else if (JoyStatus_LCL & JOY_LEFT)\r

-         ReportString = JoystickStrings[2];\r
+         ReportString = "Joystick Left\r\n";\r

        else if (JoyStatus_LCL & JOY_RIGHT)\r
        else if (JoyStatus_LCL & JOY_RIGHT)\r

-         ReportString = JoystickStrings[3];\r
+         ReportString = "Joystick Right\r\n";\r

        else if (JoyStatus_LCL & JOY_PRESS)\r
        else if (JoyStatus_LCL & JOY_PRESS)\r

-         ReportString = JoystickStrings[4];\r
+         ReportString = "Joystick Pressed\r\n";\r
+       else\r
+         ActionSent = false;\r

 \r
        /* Flag management - Only allow one string to be sent per action */\r
 \r
        /* Flag management - Only allow one string to be sent per action */\r

-       if (ReportString == NULL)\r
-       {\r
-               ActionSent = false;\r
-       }\r
-       else if (ActionSent == false)\r
+       if ((ReportString != NULL) && (ActionSent == false) && LineEncoding.BaudRateBPS)\r

        {\r
                ActionSent = true;\r
 \r
        {\r
                ActionSent = true;\r
 \r


@@ -315,7 +311,7 @@ void CDC_Task(void)
                if (IsFull)\r
                {\r
                        /* Wait until the endpoint is ready for another packet */\r
                if (IsFull)\r
                {\r
                        /* Wait until the endpoint is ready for another packet */\r

-                       while (!(Endpoint_IsINReady()));\r
+                       Endpoint_WaitUntilReady();\r

                        \r
                        /* Send an empty packet to ensure that the host does not buffer data sent to it */\r
                        Endpoint_ClearIN();\r
                        \r
                        /* Send an empty packet to ensure that the host does not buffer data sent to it */\r
                        Endpoint_ClearIN();\r