extern "C" {\r
#endif\r
\r
- /* Public Interface - May be used in end-application: */\r
- /* Throwable Events: */\r
- /** This module raises the USB Connected interrupt when the AVR is attached to a host while in device\r
- * USB mode.\r
- *\r
- * \note For the smaller USB AVRs (AT90USBXX2) with limited USB controllers, VBUS is not available to the USB controller.\r
- * this means that the current connection state is derived from the bus suspension and wake up events by default,\r
- * which is not always accurate (host may suspend the bus while still connected). If the actual connection state\r
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by\r
- * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection\r
- * and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.\r
- */\r
- RAISES_EVENT(USB_Connect);\r
-\r
- /** This module raises the USB Disconnected interrupt when the AVR is removed from a host while in\r
- * device USB mode.\r
- *\r
- * \note For the smaller USB AVRs (AT90USBXX2) with limited USB controllers, VBUS is not available to the USB controller.\r
- * this means that the current connection state is derived from the bus suspension and wake up events by default,\r
- * which is not always accurate (host may suspend the bus while still connected). If the actual connection state\r
- * needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by\r
- * passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection\r
- * and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.\r
- */\r
- RAISES_EVENT(USB_Disconnect);\r
-\r
- #if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)\r
- /** This module raises the VBUS Change event when the current VBUS status (present or not present) has\r
- * changed.\r
- *\r
- * \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_VBUSChange);\r
-\r
- /** This module raises the VBUS Connect event when the VBUS line is powered.\r
- *\r
- * \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_VBUSConnect);\r
-\r
- /** This module raises the VBUS Disconnect event when power is removed from the VBUS line.\r
- *\r
- * \note Not all USB AVR models support VBUS interrupts; this event only exists on supported AVRs.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_VBUSDisconnect);\r
- #endif\r
-\r
- #if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)\r
- /** This module raises the Suspended event when the host suspends the USB interface of the AVR\r
- * whilst running in device mode.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_Suspend);\r
-\r
- /** This module raises the Wake Up event when the host resumes the USB interface of the AVR\r
- * whilst running in device mode.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_WakeUp);\r
-\r
- /** This module raises the USB Reset event when the host resets the USB interface of the AVR\r
- * whilst running in device mode.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_Reset);\r
- #endif\r
- \r
- #if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)\r
- /** This module raises the Host Error event when the VBUS line voltage dips below the minimum threshold\r
- * while running in host mode.\r
- *\r
- * \note Not all USB AVR models support host mode; this event only exists on supported AVRs.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_HostError);\r
-\r
- /** This module raises the Device Unattached event when an attached device is removed from the AVR whilst\r
- * running in host mode.\r
- *\r
- * \note Not all USB AVR models support host mode; this event only exists on supported AVRs.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_DeviceUnattached);\r
- #endif\r
-\r
- #if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)\r
- /** This module raises the UID Change event when the UID line changes in value on dual-role devices.\r
- *\r
- * \note Not all USB AVR models support host mode and thus the UID pin; this event only exists on\r
- * supported AVRs.\r
- *\r
- * \see \ref Group_Events for more information on this event.\r
- */\r
- RAISES_EVENT(USB_UIDChange);\r
- #endif\r
- \r
/* Private Interface - For use in library only: */\r
#if !defined(__DOXYGEN__)\r
/* Macros: */\r
projects / pub / USBasp.git / blobdiff