Add default "all" makefile targets to the demo tree makefiles.

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XMEGANVM.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
index 7921b03..2caee6a 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
@@ -72,7 +72,7 @@ static void XMEGANVM_SendNVMRegAddress(const uint8_t Register)
 bool XMEGANVM_WaitWhileNVMBusBusy(void)
 {
        /* Poll the STATUS register to check to see if NVM access has been enabled */
-       while (TimeoutMSRemaining)
+       for (;;)
        {
                /* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
                XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
@@ -90,8 +90,6 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
                        return true;
                }
        }
-       
-       return false;
 }
 
 /** Waits while the target's NVM controller is busy performing an operation, exiting if the
@@ -102,7 +100,7 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
 bool XMEGANVM_WaitWhileNVMControllerBusy(void)
 {
        /* Poll the NVM STATUS register while the NVM controller is busy */
-       while (TimeoutMSRemaining)
+       for (;;)
        {
                /* Send a LDS command to read the NVM STATUS register to check the BUSY flag */
                XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
@@ -121,8 +119,6 @@ bool XMEGANVM_WaitWhileNVMControllerBusy(void)
                        return true;
                }
        }
-       
-       return false;
 }
 
 /** Retrieves the CRC value of the given memory space.
@@ -315,7 +311,7 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand, const uint8_t Eras
 /** Erases a specific memory space of the target.
  *
  *  \param[in] EraseCommand  NVM erase command to send to the device
- *  \param[in] Address  Address inside the memory space to erase
+ *  \param[in] Address       Address inside the memory space to erase
  *
  *  \return Boolean true if the command sequence complete successfully
  */
@@ -324,22 +320,71 @@ bool XMEGANVM_EraseMemory(const uint8_t EraseCommand, const uint32_t Address)
        /* Wait until the NVM controller is no longer busy */
        if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
          return false;
-         
-       /* Send the memory erase command to the target */
-       XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
-       XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
-       XPROGTarget_SendByte(EraseCommand);
-       
-       /* Chip erase is handled separately, since it's procedure is different to other erase types */
+
+       /* EEPROM and Chip erasures are triggered differently to FLASH section erasures */
        if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE)
        {
-               /* Set CMDEX bit in NVM CTRLA register to start the chip erase */
+               /* Send the memory erase command to the target */
+               XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+               XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
+               XPROGTarget_SendByte(EraseCommand);
+       
+               /* Set CMDEX bit in NVM CTRLA register to start the erase sequence */
+               XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+               XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
+               XPROGTarget_SendByte(1 << 0);   
+       }
+       else if (EraseCommand == XMEGA_NVM_CMD_ERASEEEPROM)
+       {
+               /* Send the EEPROM page buffer erase command to the target */
+               XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+               XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
+               XPROGTarget_SendByte(XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF);
+
+               /* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
+               XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+               XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
+               XPROGTarget_SendByte(1 << 0);
+
+               /* Wait until the NVM controller is no longer busy */
+               if (!(XMEGANVM_WaitWhileNVMControllerBusy()))
+                 return false;
+
+               /* Send the EEPROM memory buffer write command to the target */
+               XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+               XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
+               XPROGTarget_SendByte(XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF);
+
+               /* Load the PDI pointer register with the EEPROM page start address */
+               XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
+               XMEGANVM_SendAddress(Address);
+
+               /* Send the REPEAT command with the specified number of bytes to write */
+               XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
+               XPROGTarget_SendByte(XPROG_Param_EEPageSize - 1);
+                       
+               /* Send a ST command with indirect access and post-increment to tag each byte in the EEPROM page buffer */
+               XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
+               for (uint8_t PageByte = 0; PageByte < XPROG_Param_EEPageSize; PageByte++)
+                 XPROGTarget_SendByte(0x00);
+       
+               /* Send the memory erase command to the target */
+               XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+               XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
+               XPROGTarget_SendByte(EraseCommand);
+       
+               /* Set CMDEX bit in NVM CTRLA register to start the EEPROM erase sequence */
                XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
                XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
                XPROGTarget_SendByte(1 << 0);           
        }
        else
        {
+               /* Send the memory erase command to the target */
+               XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+               XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
+               XPROGTarget_SendByte(EraseCommand);
+       
                /* Other erase modes just need us to address a byte within the target memory space */
                XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
                XMEGANVM_SendAddress(Address);