Remove the timeout period extension code from the AVRISP project, as no single comman...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGProtocol.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index 47e2b4d..84d82bc 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -38,19 +38,19 @@
 
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
 /** Base absolute address for the target's NVM controller for PDI programming */
-uint32_t XPROG_Param_NVMBase = 0x010001C0;
+uint32_t XPROG_Param_NVMBase       = 0x010001C0;
 
 /** Size in bytes of the target's EEPROM page */
-uint16_t XPROG_Param_EEPageSize;
+uint16_t XPROG_Param_EEPageSize    = 32;
 
 /** Address of the TPI device's NVMCMD register for TPI programming */
-uint8_t  XPROG_Param_NVMCMDRegAddr;
+uint8_t  XPROG_Param_NVMCMDRegAddr = 0x33;
 
 /** Address of the TPI device's NVMCSR register for TPI programming */
-uint8_t  XPROG_Param_NVMCSRRegAddr;
+uint8_t  XPROG_Param_NVMCSRRegAddr = 0x32;
 
 /** Currently selected XPROG programming protocol */
-uint8_t  XPROG_SelectedProtocol = XPRG_PROTOCOL_PDI;
+uint8_t  XPROG_SelectedProtocol    = XPRG_PROTOCOL_PDI;
 
 /** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI/TPI
  *  programming.
@@ -131,7 +131,7 @@ static void XPROGProtocol_EnterXPROGMode(void)
                XPROGTarget_SendByte(0x07);
 
                /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
-               XPROGTarget_SendByte(PDI_CMD_KEY);      
+               XPROGTarget_SendByte(PDI_CMD_KEY);
                for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
                  XPROGTarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);