Add support for the Paranoid Studio USB2AX boards (hardware revisions 1-3).

[pub/USBasp.git] / Projects / AVRISP-MKII / makefile

diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index adb6495..10b3c75 100644 (file)
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -47,7 +47,7 @@
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #

-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,

 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.


@@ -60,31 +60,35 @@
 
 
 # MCU name
 
 
 # MCU name

-MCU = at90usb1287
+MCU = at90usb162
+
+
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8

 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called

 # "Board" inside the application directory.
 # "Board" inside the application directory.

-BOARD = USBKEY
+BOARD = USBTINYMKII

 
 
 # Processor frequency.
 
 
 # Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency in Hz. You can then use this symbol in your source code to 
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to

 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #

-#     This will be an integer division of F_CLOCK below, as it is sourced by
-#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value

 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.

-F_CPU = 8000000
+F_CPU = 16000000

 
 
 # Input clock frequency.
 
 
 # Input clock frequency.

-#     This will define a symbol, F_CLOCK, in all source code files equal to the 
+#     This will define a symbol, F_USB, in all source code files equal to the

 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed


@@ -94,7 +98,7 @@ F_CPU = 8000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_CLOCK = $(F_CPU)
+F_USB = $(F_CPU)

 
 
 # Output format. (can be srec, ihex, binary)
 
 
 # Output format. (can be srec, ihex, binary)


@@ -102,7 +106,7 @@ FORMAT = ihex
 
 
 # Target file name (without extension).
 
 
 # Target file name (without extension).

-TARGET = AVRISP
+TARGET = AVRISP-MKII

 
 
 # Object files directory
 
 
 # Object files directory


@@ -112,15 +116,39 @@ OBJDIR = .
 
 
 # Path to the LUFA library
 
 
 # Path to the LUFA library

-LUFA_PATH = ../../
+LUFA_PATH = ../..

 
 
 
 

-# LUFA library compile-time options
+# LUFA library compile-time options and predefined tokens

 LUFA_OPTS  = -D USB_DEVICE_ONLY
 LUFA_OPTS  = -D USB_DEVICE_ONLY

+LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
+LUFA_OPTS += -D ORDERED_EP_CONFIG

 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"

+LUFA_OPTS += -D NO_INTERNAL_SERIAL
+LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
+LUFA_OPTS += -D NO_DEVICE_SELF_POWER
+
+LUFA_OPTS += -D AUX_LINE_PORT=PORTB
+LUFA_OPTS += -D AUX_LINE_PIN=PINB
+LUFA_OPTS += -D AUX_LINE_DDR=DDRB
+LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
+LUFA_OPTS += -D ENABLE_ISP_PROTOCOL
+LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL
+LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
+LUFA_OPTS += -D VTARGET_REF_VOLTS=5
+LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1
+#LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF
+#LUFA_OPTS += -D NO_VTARGET_DETECT
+#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
+#LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE
+#LUFA_OPTS += -D INVERTED_ISP_MISO
+
+
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile

 
 
 # List C source files here. (C dependencies are automatically generated.)
 
 
 # List C source files here. (C dependencies are automatically generated.)


@@ -134,21 +162,11 @@ SRC = $(TARGET).c                                                 \
          Lib/XPROG/XPROGTarget.c                                     \
          Lib/XPROG/XMEGANVM.c                                        \
          Lib/XPROG/TINYNVM.c                                         \
          Lib/XPROG/XPROGTarget.c                                     \
          Lib/XPROG/XMEGANVM.c                                        \
          Lib/XPROG/TINYNVM.c                                         \

-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c             \
-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
-         $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
-         $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
-         $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
-         $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
+         $(LUFA_SRC_USB)

 
 
 # List C++ source files here. (C dependencies are automatically generated.)
 
 
 # List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC = 
+CPPSRC =

 
 
 # List Assembler source files here.
 
 
 # List Assembler source files here.


@@ -158,10 +176,10 @@ CPPSRC =
 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 #     it will preserve the spelling of the filenames, and gcc itself does
 #     care about how the name is spelled on its command-line.
 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 #     it will preserve the spelling of the filenames, and gcc itself does
 #     care about how the name is spelled on its command-line.

-ASRC = 
+ASRC =

 
 
 
 

-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].

 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s


@@ -186,30 +204,27 @@ EXTRAINCDIRS = $(LUFA_PATH)/
 #     gnu89 = c89 plus GCC extensions
 #     c99   = ISO C99 standard (not yet fully implemented)
 #     gnu99 = c99 plus GCC extensions
 #     gnu89 = c89 plus GCC extensions
 #     c99   = ISO C99 standard (not yet fully implemented)
 #     gnu99 = c99 plus GCC extensions

-CSTANDARD = -std=gnu99
+CSTANDARD = -std=c99

 
 
 # Place -D or -U options here for C sources
 
 
 # Place -D or -U options here for C sources

-CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
-CDEFS += -DAUX_LINE_PORT=PORTB
-CDEFS += -DAUX_LINE_PIN=PINB
-CDEFS += -DAUX_LINE_DDR=DDRB
-CDEFS += -DAUX_LINE_MASK="(1 << 4)"
-CDEFS += -DENABLE_ISP_PROTOCOL
-CDEFS += -DENABLE_XPROG_PROTOCOL
-CDEFS += -DVTARGET_ADC_CHANNEL=2
-CDEFS += -DVTARGET_REF_VOLTS=5
-CDEFS += -DVTARGET_SCALE_FACTOR=1
-#CDEFS += -DNO_VTARGET_DETECT
-#CDEFS += -DLIBUSB_DRIVER_COMPAT
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
+CDEFS += $(LUFA_OPTS)

 
 
 # Place -D or -U options here for ASM sources
 
 
 # Place -D or -U options here for ASM sources

-ADEFS = -DF_CPU=$(F_CPU)
-
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_USB=$(F_USB)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)

 
 # Place -D or -U options here for C++ sources
 
 # Place -D or -U options here for C++ sources

-CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)

 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 


@@ -231,10 +246,13 @@ CFLAGS += -ffunction-sections
 CFLAGS += -fno-inline-small-functions
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums
 CFLAGS += -fno-inline-small-functions
 CFLAGS += -fpack-struct
 CFLAGS += -fshort-enums

+CFLAGS += -fno-strict-aliasing
+CFLAGS += -fno-split-wide-types

 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes

-CFLAGS += -Wundef
+#CFLAGS += -mshort-calls

 #CFLAGS += -fno-unit-at-a-time
 #CFLAGS += -fno-unit-at-a-time

+#CFLAGS += -Wundef

 #CFLAGS += -Wunreachable-code
 #CFLAGS += -Wsign-compare
 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
 #CFLAGS += -Wunreachable-code
 #CFLAGS += -Wsign-compare
 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)


@@ -258,7 +276,7 @@ CPPFLAGS += -fpack-struct
 CPPFLAGS += -fshort-enums
 CPPFLAGS += -fno-exceptions
 CPPFLAGS += -Wall
 CPPFLAGS += -fshort-enums
 CPPFLAGS += -fno-exceptions
 CPPFLAGS += -Wall

-CFLAGS += -Wundef
+CPPFLAGS += -Wundef

 #CPPFLAGS += -mshort-calls
 #CPPFLAGS += -fno-unit-at-a-time
 #CPPFLAGS += -Wstrict-prototypes
 #CPPFLAGS += -mshort-calls
 #CPPFLAGS += -fno-unit-at-a-time
 #CPPFLAGS += -Wstrict-prototypes


@@ -276,7 +294,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 


@@ -289,7 +307,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB = 
+PRINTF_LIB =

 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 


@@ -301,7 +319,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB = 
+SCANF_LIB =

 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 


@@ -313,7 +331,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS = 
+EXTRALIBDIRS =

 
 
 
 
 
 


@@ -335,8 +353,8 @@ EXTMEMOPTS =
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file

-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax 
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax

 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))


@@ -347,9 +365,7 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 #---------------- Programming Options (avrdude) ----------------
 
 
 #---------------- Programming Options (avrdude) ----------------
 

-# Programming hardware: alf avr910 avrisp bascom bsd 
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
+# Programming hardware

 # Type: avrdude -c ?
 # to get a full listing.
 #
 # Type: avrdude -c ?
 # to get a full listing.
 #


@@ -372,7 +388,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 
 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 


@@ -406,7 +422,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when 
+#     just set to localhost unless doing some sort of crazy debugging when

 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 


@@ -429,12 +445,13 @@ REMOVEDIR = rm -rf
 COPY = cp
 WINSHELL = cmd
 
 COPY = cp
 WINSHELL = cmd
 

+

 # Define Messages
 # English
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
 # Define Messages
 # English
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_BEFORE = Size before:

 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:


@@ -453,10 +470,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
 
 
 # Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

 
 # Define all listing files.
 
 # Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

 
 
 # Compiler flags to generate dependency files.
 
 
 # Compiler flags to generate dependency files.


@@ -474,7 +491,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
 
 
 # Default target.

-all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end
+all: begin gccversion sizebefore build sizeafter end

 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym
 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym


@@ -509,6 +526,7 @@ ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 
 MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
 FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
 

+

 sizebefore:
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
        2>/dev/null; echo; fi
 sizebefore:
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
        2>/dev/null; echo; fi


@@ -517,40 +535,14 @@ sizeafter:
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
        2>/dev/null; echo; fi
 
        @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
        2>/dev/null; echo; fi
 

-$(LUFA_PATH)/LUFA/LUFA_Events.lst:
-       @$(MAKE) -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst

 
 

-checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst
-       @echo
-       @echo Checking for invalid events...
-       @$(shell) avr-nm $(OBJ) | sed -n -e 's/^.*EVENT_/EVENT_/p' | \
-                        grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true
-       @sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp
-       @if test -s InvalidEvents.tmp; then exit 1; fi
-       
-showliboptions:
-       @echo
-       @echo ---- Compile Time Library Options ----
-       @for i in $(LUFA_OPTS:-D%=%); do \
-               echo $$i; \
-       done
-       @echo --------------------------------------
-
-showtarget:
-       @echo
-       @echo --------- Target Information ---------
-       @echo AVR Model: $(MCU)
-       @echo Board:     $(BOARD)
-       @echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
-       @echo --------------------------------------
-       

 
 # Display compiler version information.
 
 # Display compiler version information.

-gccversion : 
+gccversion :

        @$(CC) --version
 
 
        @$(CC) --version
 
 

-# Program the device.  
+# Program the device.

 program: $(TARGET).hex $(TARGET).eep
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
 program: $(TARGET).hex $(TARGET).eep
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 


@@ -561,7 +553,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase

-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash $(TARGET).hex

        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep


@@ -572,14 +564,14 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep

-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash $(TARGET).eep

        dfu-programmer $(MCU) reset
 
 
 # Generate avr-gdb config/init file which does the following:
        dfu-programmer $(MCU) reset
 
 
 # Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set 
+#     define the reset signal, load the target file, connect to target, and set

 #     a breakpoint at main().
 #     a breakpoint at main().

-gdb-config: 
+gdb-config:

        @$(REMOVE) $(GDBINIT_FILE)
        @echo define reset >> $(GDBINIT_FILE)
        @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
        @$(REMOVE) $(GDBINIT_FILE)
        @echo define reset >> $(GDBINIT_FILE)
        @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)


@@ -633,7 +625,7 @@ extcoff: $(TARGET).elf
 %.hex: %.elf
        @echo
        @echo $(MSG_FLASH) $@
 %.hex: %.elf
        @echo
        @echo $(MSG_FLASH) $@

-       $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+       $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@

 
 %.eep: %.elf
        @echo
 
 %.eep: %.elf
        @echo


@@ -645,7 +637,7 @@ extcoff: $(TARGET).elf
 %.lss: %.elf
        @echo
        @echo $(MSG_EXTENDED_LISTING) $@
 %.lss: %.elf
        @echo
        @echo $(MSG_EXTENDED_LISTING) $@

-       $(OBJDUMP) -h -z -S $< > $@
+       $(OBJDUMP) -h -S -z $< > $@

 
 # Create a symbol table from ELF output file.
 %.sym: %.elf
 
 # Create a symbol table from ELF output file.
 %.sym: %.elf


@@ -677,14 +669,14 @@ extcoff: $(TARGET).elf
 $(OBJDIR)/%.o : %.c
        @echo
        @echo $(MSG_COMPILING) $<
 $(OBJDIR)/%.o : %.c
        @echo
        @echo $(MSG_COMPILING) $<

-       $(CC) -c $(ALL_CFLAGS) $< -o $@ 
+       $(CC) -c $(ALL_CFLAGS) $< -o $@

 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
        @echo
        @echo $(MSG_COMPILING_CPP) $<
 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
        @echo
        @echo $(MSG_COMPILING_CPP) $<

-       $(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+       $(CC) -c $(ALL_CPPFLAGS) $< -o $@

 
 
 # Compile: create assembler files from C source files.
 
 
 # Compile: create assembler files from C source files.


@@ -706,40 +698,46 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c

-       $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
-       
+       $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+

 
 # Target: clean project.
 
 # Target: clean project.

-clean: begin clean_list clean_binary end
+clean: begin clean_list end

 
 

-clean_binary:
-       $(REMOVE) $(TARGET).hex
-       
-clean_list:
+clean_list :
+       @echo

        @echo $(MSG_CLEANING)
        @echo $(MSG_CLEANING)

+       $(REMOVE) $(TARGET).hex

        $(REMOVE) $(TARGET).eep
        $(REMOVE) $(TARGET).eep

-       $(REMOVE) $(TARGET)eep.hex

        $(REMOVE) $(TARGET).cof
        $(REMOVE) $(TARGET).elf
        $(REMOVE) $(TARGET).map
        $(REMOVE) $(TARGET).sym
        $(REMOVE) $(TARGET).lss
        $(REMOVE) $(TARGET).cof
        $(REMOVE) $(TARGET).elf
        $(REMOVE) $(TARGET).map
        $(REMOVE) $(TARGET).sym
        $(REMOVE) $(TARGET).lss

-       $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o)
-       $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst)
+       $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+       $(REMOVE) $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

        $(REMOVE) $(SRC:.c=.s)
        $(REMOVE) $(SRC:.c=.d)
        $(REMOVE) $(SRC:.c=.i)
        $(REMOVE) $(SRC:.c=.s)
        $(REMOVE) $(SRC:.c=.d)
        $(REMOVE) $(SRC:.c=.i)

-       $(REMOVE) InvalidEvents.tmp

        $(REMOVEDIR) .dep
 
 doxygen:
        $(REMOVEDIR) .dep
 
 doxygen:

-       @echo Generating Project Documentation...
+       @echo Generating Project Documentation \($(TARGET)\)...

        @doxygen Doxygen.conf
        @echo Documentation Generation Complete.
 
 clean_doxygen:
        rm -rf Documentation
 
        @doxygen Doxygen.conf
        @echo Documentation Generation Complete.
 
 clean_doxygen:
        rm -rf Documentation
 

+checksource:
+       @for f in $(SRC) $(CPPSRC) $(ASRC); do \
+               if [ -f $$f ]; then \
+                       echo "Found Source File: $$f" ; \
+               else \
+                       echo "Source File Not Found: $$f" ; \
+               fi; done 
+
+

 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 


@@ -749,8 +747,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 
 # Listing of phony targets.
 
 
 # Listing of phony targets.

-.PHONY : all checkinvalidevents showliboptions    \
-showtarget begin finish end sizebefore sizeafter  \
-gccversion build elf hex eep lss sym coff extcoff \
-program dfu flip flip-ee dfu-ee clean debug       \
-clean_list clean_binary gdb-config doxygen
\ No newline at end of file
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config checksource