USBasp 2006.09.16.
[pub/USBasp.git] / software / usbasp.c
diff --git a/software/usbasp.c b/software/usbasp.c
deleted file mode 100644 (file)
index 464e80d..0000000
+++ /dev/null
@@ -1,329 +0,0 @@
-#include "ac_cfg.h"
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <errno.h>
-#include <sys/time.h>
-#include <unistd.h>
-
-#include "avr.h"
-#include "pgm.h"
-#include "usbasp.h"
-
-#ifdef HAVE_LIBUSB
-#include <usb.h>       /* this is libusb, see http://libusb.sourceforge.net/ */
-
-extern char * progname;
-extern int do_cycles;
-
-static usb_dev_handle *usbhandle;
-
-/*
- * wrapper for usb_control_msg call
- */
-static int usbasp_transmit(unsigned char receive, unsigned char functionid,
-                          unsigned char send[4], unsigned char * buffer, int buffersize)
-{
-  int nbytes;
-  nbytes = usb_control_msg(usbhandle,
-                          USB_TYPE_VENDOR | USB_RECIP_DEVICE | (receive << 7),
-                          functionid,
-                          (send[1] << 8) | send[0],
-                          (send[3] << 8) | send[2],
-                          buffer, buffersize,
-                          5000);
-  if(nbytes < 0){
-    fprintf(stderr, "%s: error: usbasp_transmit: %s\n", progname, usb_strerror());
-    exit(1);
-  }
-
-  return nbytes;
-}
-
-static int usbasp_open(PROGRAMMER * pgm, char * port)
-{
-  struct usb_bus       *bus;
-  struct usb_device *dev = 0;
-
-  usb_init();
-  usb_find_busses();
-  usb_find_devices();
-  for(bus=usb_busses; bus; bus=bus->next){
-    for(dev=bus->devices; dev; dev=dev->next){
-      if(dev->descriptor.idVendor == USBDEV_VENDOR && dev->descriptor.idProduct == USBDEV_PRODUCT)
-       break;
-    }
-    if(dev)
-      break;
-  }
-  if(!dev){
-    fprintf(stderr, "%s: error: could not find USB device vendor=0x%x product=0x%x\n",
-           progname, USBDEV_VENDOR, USBDEV_PRODUCT);
-    exit(1);
-  }
-
-  usbhandle = usb_open(dev);
-  if(!usbhandle){
-    fprintf(stderr, "%s: error: opening usb device: %s\n",
-           progname, usb_strerror());
-    exit(1);
-  }
-
-  return 0;
-}
-
-
-static void usbasp_close(PROGRAMMER * pgm)
-{
-  unsigned char temp[4];
-  memset(temp, 0, sizeof(temp));
-  usbasp_transmit(1, USBASP_FUNC_DISCONNECT, temp, temp, sizeof(temp));
-
-  usb_close(usbhandle);
-}
-
-
-static int usbasp_initialize(PROGRAMMER * pgm, AVRPART * p)
-{
-
-  unsigned char temp[4];
-  memset(temp, 0, sizeof(temp));
-  usbasp_transmit(1, USBASP_FUNC_CONNECT, temp, temp, sizeof(temp));
-
-  usleep(100000);
-
-  pgm->program_enable(pgm, p);
-  return 0;
-}
-
-static void usbasp_disable(PROGRAMMER * pgm)
-{
-  /* Do nothing. */
-
-  return;
-}
-
-static void usbasp_enable(PROGRAMMER * pgm)
-{
-  /* Do nothing. */
-
-  return;
-}
-
-static void usbasp_display(PROGRAMMER * pgm, char * p)
-{
-  return;
-}
-
-
-static int usbasp_cmd(PROGRAMMER * pgm, unsigned char cmd[4],
-                   unsigned char res[4])
-{
-  int nbytes =
-    usbasp_transmit(1, USBASP_FUNC_TRANSMIT, cmd, res, sizeof(res));
-
-  if(nbytes != 4){
-    fprintf(stderr, "%s: error: wrong responds size\n",
-           progname);
-    return -1;
-  }
-
-  return 0;
-}
-
-
-static int usbasp_program_enable(PROGRAMMER * pgm, AVRPART * p)
-{
-  unsigned char res[4];
-  unsigned char cmd[4];
-  memset(cmd, 0, sizeof(cmd));
-  memset(res, 0, sizeof(res));
-
-  cmd[0] = 0;
-
-  int nbytes =
-    usbasp_transmit(1, USBASP_FUNC_ENABLEPROG, cmd, res, sizeof(res));
-
-  if ((nbytes != 1) | (res[0] != 0)) {
-    fprintf(stderr, "%s: error: programm enable: target doesn't answer. %x \n",
-           progname, res[0]);
-    return -1;
-  }
-
-  return 0;
-}
-
-
-static int usbasp_chip_erase(PROGRAMMER * pgm, AVRPART * p)
-{
-  unsigned char cmd[4];
-  unsigned char res[4];
-
-  if (p->op[AVR_OP_CHIP_ERASE] == NULL) {
-    fprintf(stderr, "chip erase instruction not defined for part \"%s\"\n",
-            p->desc);
-    return -1;
-  }
-
-  memset(cmd, 0, sizeof(cmd));
-
-  avr_set_bits(p->op[AVR_OP_CHIP_ERASE], cmd);
-  pgm->cmd(pgm, cmd, res);
-  usleep(p->chip_erase_delay);
-  pgm->initialize(pgm, p);
-
-  return 0;
-}
-
-
-static int usbasp_paged_load(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
-                             int page_size, int n_bytes)
-{
-  int n;
-  unsigned char cmd[4];
-  int address = 0;
-  int wbytes = n_bytes;
-  int blocksize;
-  unsigned char * buffer = m->buf;
-  int function;
-
-  if (strcmp(m->desc, "flash") == 0) {
-    function = USBASP_FUNC_READFLASH;
-  } else if (strcmp(m->desc, "eeprom") == 0) {
-    function = USBASP_FUNC_READEEPROM;
-  } else {
-    return -2;
-  }
-
-  while (wbytes) {
-    if (wbytes > USBASP_READBLOCKSIZE) {
-      blocksize = USBASP_READBLOCKSIZE;
-      wbytes -= USBASP_READBLOCKSIZE;
-    } else {
-      blocksize = wbytes;
-      wbytes = 0;
-    }
-
-    cmd[0] = address & 0xFF;
-    cmd[1] = address >> 8;
-
-    n = usbasp_transmit(1, function, cmd, buffer, blocksize);
-
-    if (n != blocksize) {
-      fprintf(stderr, "%s: error: wrong reading bytes %x\n",
-             progname, n);
-      exit(1);
-    }
-
-    buffer += blocksize;
-    address += blocksize;
-
-    report_progress (address, n_bytes, NULL);
-  }
-
-  return n_bytes;
-}
-
-static int usbasp_paged_write(PROGRAMMER * pgm, AVRPART * p, AVRMEM * m,
-                              int page_size, int n_bytes)
-{
-  int n;
-  unsigned char cmd[4];
-  int address = 0;
-  int wbytes = n_bytes;
-  int blocksize;
-  unsigned char * buffer = m->buf;
-  unsigned char blockflags = USBASP_BLOCKFLAG_FIRST;
-  int function;
-
-  if (strcmp(m->desc, "flash") == 0) {
-    function = USBASP_FUNC_WRITEFLASH;
-  } else if (strcmp(m->desc, "eeprom") == 0) {
-    function = USBASP_FUNC_WRITEEEPROM;
-  } else {
-    return -2;
-  }
-
-  while (wbytes) {
-    if (wbytes > USBASP_WRITEBLOCKSIZE) {
-      blocksize = USBASP_WRITEBLOCKSIZE;
-      wbytes -= USBASP_WRITEBLOCKSIZE;
-    } else {
-      blocksize = wbytes;
-      wbytes = 0;
-      blockflags |= USBASP_BLOCKFLAG_LAST;
-    }
-
-    cmd[0] = address & 0xFF;
-    cmd[1] = address >> 8;
-    cmd[2] = page_size & 0xFF;
-    cmd[3] = (blockflags & 0x0F) + ((page_size & 0xF00) >> 4); //TP: Mega128 fix
-    blockflags = 0;
-
-    n = usbasp_transmit(0, function, cmd, buffer, blocksize);
-
-    if (n != blocksize) {
-      fprintf(stderr, "%s: error: wrong count at writing %x\n",
-             progname, n);
-      exit(1);
-    }
-
-
-    buffer += blocksize;
-    address += blocksize;
-
-    report_progress (address, n_bytes, NULL);
-  }
-
-  return n_bytes;
-}
-
-void usbasp_initpgm(PROGRAMMER * pgm)
-{
-  strcpy(pgm->type, "usbasp");
-
-  /*
-   * mandatory functions
-   */
-
-  pgm->initialize     = usbasp_initialize;
-  pgm->display        = usbasp_display;
-  pgm->enable         = usbasp_enable;
-  pgm->disable        = usbasp_disable;
-  pgm->program_enable = usbasp_program_enable;
-  pgm->chip_erase     = usbasp_chip_erase;
-  pgm->cmd            = usbasp_cmd;
-  pgm->open           = usbasp_open;
-  pgm->close          = usbasp_close;
-
-  /*
-   * optional functions
-   */
-
-  pgm->paged_write = usbasp_paged_write;
-  pgm->paged_load = usbasp_paged_load;
-
-}
-
-
-#else /* HAVE_LIBUSB */
-
-extern char * progname;
-
-static int usbasp_nousb_open (struct programmer_t *pgm, char * name)
-{
-  fprintf(stderr, "%s: error: no usb support. please compile again with libusb installed.\n",
-         progname);
-
-  exit(1);
-}
-
-void usbasp_initpgm(PROGRAMMER * pgm)
-{
-  strcpy(pgm->type, "usbasp");
-
-  pgm->open           = usbasp_nousb_open;
-}
-
-#endif  /* HAVE_LIBUSB */