Minor documentation improvements.

[pub/USBasp.git] / Demos / Device / LowLevel / AudioInput / makefile

diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 86bc094..82680a0 100644 (file)
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -47,7 +47,7 @@
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #

-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,

 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.


@@ -63,20 +63,24 @@
 MCU = at90usb1287
 
 
 MCU = at90usb1287
 
 

+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+

 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # Target board (see library "Board Types" documentation, NONE for projects not requiring

-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called

 # "Board" inside the application directory.
 # "Board" inside the application directory.

-BOARD  = USBKEY
+BOARD = USBKEY

 
 
 # Processor frequency.
 
 
 # Processor frequency.

-#     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency in Hz. You can then use this symbol in your source code to 
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to

 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #

-#     This will be an integer division of F_CLOCK below, as it is sourced by
-#     F_CLOCK after it has run through any CPU prescalers. Note that this value
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value

 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.


@@ -84,7 +88,7 @@ F_CPU = 8000000
 
 
 # Input clock frequency.
 
 
 # Input clock frequency.

-#     This will define a symbol, F_CLOCK, in all source code files equal to the 
+#     This will define a symbol, F_USB, in all source code files equal to the

 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed


@@ -94,7 +98,7 @@ F_CPU = 8000000
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.

-F_CLOCK = $(F_CPU)
+F_USB = $(F_CPU)

 
 
 # Output format. (can be srec, ihex, binary)
 
 
 # Output format. (can be srec, ihex, binary)


@@ -123,6 +127,7 @@ LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 
 LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 
 LUFA_OPTS += -D MICROPHONE_BIASED_TO_HALF_RAIL

+LUFA_OPTS += -D USE_TEST_TONE

 
 
 # Create the LUFA source path variables by including the LUFA root makefile
 
 
 # Create the LUFA source path variables by including the LUFA root makefile


@@ -136,7 +141,7 @@ SRC = $(TARGET).c                                                 \
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
 
 
 # List C++ source files here. (C dependencies are automatically generated.)

-CPPSRC = 
+CPPSRC =

 
 
 # List Assembler source files here.
 
 
 # List Assembler source files here.


@@ -149,7 +154,7 @@ CPPSRC =
 ASRC =
 
 
 ASRC =
 
 

-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].

 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s


@@ -179,20 +184,20 @@ CSTANDARD = -std=c99
 
 # Place -D or -U options here for C sources
 CDEFS  = -DF_CPU=$(F_CPU)UL
 
 # Place -D or -U options here for C sources
 CDEFS  = -DF_CPU=$(F_CPU)UL

-CDEFS += -DF_CLOCK=$(F_CLOCK)UL
-CDEFS += -DBOARD=BOARD_$(BOARD)
+CDEFS += -DF_USB=$(F_USB)UL
+CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)

 CDEFS += $(LUFA_OPTS)
 
 
 # Place -D or -U options here for ASM sources
 ADEFS  = -DF_CPU=$(F_CPU)
 CDEFS += $(LUFA_OPTS)
 
 
 # Place -D or -U options here for ASM sources
 ADEFS  = -DF_CPU=$(F_CPU)

-ADEFS += -DF_CLOCK=$(F_CLOCK)UL
+ADEFS += -DF_USB=$(F_USB)UL

 ADEFS += -DBOARD=BOARD_$(BOARD)
 ADEFS += $(LUFA_OPTS)
 
 # Place -D or -U options here for C++ sources
 CPPDEFS  = -DF_CPU=$(F_CPU)UL
 ADEFS += -DBOARD=BOARD_$(BOARD)
 ADEFS += $(LUFA_OPTS)
 
 # Place -D or -U options here for C++ sources
 CPPDEFS  = -DF_CPU=$(F_CPU)UL

-CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CPPDEFS += -DF_USB=$(F_USB)UL

 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 CPPDEFS += $(LUFA_OPTS)
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 CPPDEFS += -DBOARD=BOARD_$(BOARD)
 CPPDEFS += $(LUFA_OPTS)
 #CPPDEFS += -D__STDC_LIMIT_MACROS


@@ -263,7 +268,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]

-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex

 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 


@@ -276,7 +281,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.

-PRINTF_LIB = 
+PRINTF_LIB =

 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 


@@ -288,7 +293,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.

-SCANF_LIB = 
+SCANF_LIB =

 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 


@@ -300,7 +305,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.

-EXTRALIBDIRS = 
+EXTRALIBDIRS =

 
 
 
 
 
 


@@ -323,7 +328,7 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax 
+LDFLAGS += -Wl,--relax

 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))


@@ -357,7 +362,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug

-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>

 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 
 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 


@@ -391,7 +396,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally

-#     just set to localhost unless doing some sort of crazy debugging when 
+#     just set to localhost unless doing some sort of crazy debugging when

 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 


@@ -420,7 +425,7 @@ WINSHELL = cmd
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------

-MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_BEFORE = Size before:

 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:


@@ -439,10 +444,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
 
 
 # Define all object files.

-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)

 
 # Define all listing files.
 
 # Define all listing files.

-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)

 
 
 # Compiler flags to generate dependency files.
 
 
 # Compiler flags to generate dependency files.


@@ -507,11 +512,11 @@ sizeafter:
 
 
 # Display compiler version information.
 
 
 # Display compiler version information.

-gccversion : 
+gccversion :

        @$(CC) --version
 
 
        @$(CC) --version
 
 

-# Program the device.  
+# Program the device.

 program: $(TARGET).hex $(TARGET).eep
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
 program: $(TARGET).hex $(TARGET).eep
        $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 


@@ -522,7 +527,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase
 
 dfu: $(TARGET).hex
        dfu-programmer $(MCU) erase

-       dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+       dfu-programmer $(MCU) flash $(TARGET).hex

        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
        dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep


@@ -533,14 +538,14 @@ flip-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
        $(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep

-       dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+       dfu-programmer $(MCU) eeprom-flash $(TARGET).eep

        dfu-programmer $(MCU) reset
 
 
 # Generate avr-gdb config/init file which does the following:
        dfu-programmer $(MCU) reset
 
 
 # Generate avr-gdb config/init file which does the following:

-#     define the reset signal, load the target file, connect to target, and set 
+#     define the reset signal, load the target file, connect to target, and set

 #     a breakpoint at main().
 #     a breakpoint at main().

-gdb-config: 
+gdb-config:

        @$(REMOVE) $(GDBINIT_FILE)
        @echo define reset >> $(GDBINIT_FILE)
        @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
        @$(REMOVE) $(GDBINIT_FILE)
        @echo define reset >> $(GDBINIT_FILE)
        @echo SIGNAL SIGHUP >> $(GDBINIT_FILE)


@@ -638,14 +643,14 @@ extcoff: $(TARGET).elf
 $(OBJDIR)/%.o : %.c
        @echo
        @echo $(MSG_COMPILING) $<
 $(OBJDIR)/%.o : %.c
        @echo
        @echo $(MSG_COMPILING) $<

-       $(CC) -c $(ALL_CFLAGS) $< -o $@ 
+       $(CC) -c $(ALL_CFLAGS) $< -o $@

 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
        @echo
        @echo $(MSG_COMPILING_CPP) $<
 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
        @echo
        @echo $(MSG_COMPILING_CPP) $<

-       $(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+       $(CC) -c $(ALL_CPPFLAGS) $< -o $@

 
 
 # Compile: create assembler files from C source files.
 
 
 # Compile: create assembler files from C source files.


@@ -667,7 +672,7 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c

-       $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
+       $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@

 
 
 # Target: clean project.
 
 
 # Target: clean project.


@@ -691,13 +696,24 @@ clean_list :
        $(REMOVEDIR) .dep
 
 doxygen:
        $(REMOVEDIR) .dep
 
 doxygen:

-       @echo Generating Project Documentation...
-       @doxygen Doxygen.conf
+       @echo Generating Project Documentation \($(TARGET)\)...
+       @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+         exit 1; \
+       fi;

        @echo Documentation Generation Complete.
 
 clean_doxygen:
        rm -rf Documentation
 
        @echo Documentation Generation Complete.
 
 clean_doxygen:
        rm -rf Documentation
 

+checksource:
+       @for f in $(SRC) $(CPPSRC) $(ASRC); do \
+               if [ -f $$f ]; then \
+                       echo "Found Source File: $$f" ; \
+               else \
+                       echo "Source File Not Found: $$f" ; \
+               fi; done 
+
+

 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 # Create object files directory
 $(shell mkdir $(OBJDIR) 2>/dev/null)
 


@@ -710,4 +726,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 build elf hex eep lss sym coff extcoff doxygen clean          \
 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 .PHONY : all begin finish end sizebefore sizeafter gccversion \
 build elf hex eep lss sym coff extcoff doxygen clean          \
 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \

-debug gdb-config
+debug gdb-config checksource