/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
-
+ Copyright (C) Dean Camera, 2011.
+
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)
- Permission to use, copy, modify, distribute, and sell this
+ Permission to use, copy, modify, distribute, and sell this
software and its documentation for any purpose is hereby granted
- without fee, provided that the above copyright notice appear in
+ without fee, provided that the above copyright notice appear in
all copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
The author disclaim all warranties with regard to this
* Main source file for the StillImageHost demo. This file contains the main tasks of
* the demo and is responsible for the initial application hardware configuration.
*/
-
+
#include "StillImageHost.h"
/** LUFA Still Image Class driver interface configuration and state information. This structure is
{
.DataINPipeNumber = 1,
.DataINPipeDoubleBank = false,
-
+
.DataOUTPipeNumber = 2,
.DataOUTPipeDoubleBank = false,
-
+
.EventsPipeNumber = 3,
.EventsPipeDoubleBank = false,
},
};
+
/** Main program entry point. This routine configures the hardware required by the application, then
* enters a loop to run the application tasks in sequence.
*/
{
case HOST_STATE_Addressed:
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
+
uint16_t ConfigDescriptorSize;
uint8_t ConfigDescriptorData[512];
break;
}
- if (SImage_Host_ConfigurePipes(&DigitalCamera_SI_Interface,
- ConfigDescriptorSize, ConfigDescriptorData) != SI_ENUMERROR_NoError)
+ if (SI_Host_ConfigurePipes(&DigitalCamera_SI_Interface,
+ ConfigDescriptorSize, ConfigDescriptorData) != SI_ENUMERROR_NoError)
{
puts_P(PSTR("Attached Device Not a Valid Still Image Class Device.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
-
+
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Error Setting Device Configuration.\r\n"));
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
-
+
puts_P(PSTR("Still Image Device Enumerated.\r\n"));
LEDs_SetAllLEDs(LEDMASK_USB_READY);
USB_HostState = HOST_STATE_Configured;
break;
case HOST_STATE_Configured:
puts_P(PSTR("Opening Session...\r\n"));
-
- if (SImage_Host_OpenSession(&DigitalCamera_SI_Interface) != PIPE_RWSTREAM_NoError)
+
+ if (SI_Host_OpenSession(&DigitalCamera_SI_Interface) != PIPE_RWSTREAM_NoError)
{
puts_P(PSTR("Could not open PIMA session.\r\n"));
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
puts_P(PSTR("Turning off Device...\r\n"));
- SImage_Host_SendCommand(&DigitalCamera_SI_Interface, 0x1013, 0, NULL);
- if (SImage_Host_ReceiveResponse(&DigitalCamera_SI_Interface))
+ SI_Host_SendCommand(&DigitalCamera_SI_Interface, 0x1013, 0, NULL);
+ if (SI_Host_ReceiveResponse(&DigitalCamera_SI_Interface))
{
puts_P(PSTR("Could not turn off device.\r\n"));
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
- break;
+ break;
}
puts_P(PSTR("Device Off.\r\n"));
puts_P(PSTR("Closing Session...\r\n"));
- if (SImage_Host_CloseSession(&DigitalCamera_SI_Interface) != PIPE_RWSTREAM_NoError)
+ if (SI_Host_CloseSession(&DigitalCamera_SI_Interface) != PIPE_RWSTREAM_NoError)
{
puts_P(PSTR("Could not close PIMA session.\r\n"));
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
-
+
LEDs_SetAllLEDs(LEDMASK_USB_READY);
USB_HostState = HOST_STATE_WaitForDeviceRemoval;
break;
}
-
- SImage_Host_USBTask(&DigitalCamera_SI_Interface);
+
+ SI_Host_USBTask(&DigitalCamera_SI_Interface);
USB_USBTask();
}
}
clock_prescale_set(clock_div_1);
/* Hardware Initialization */
- SerialStream_Init(9600, false);
+ Serial_Init(9600, false);
LEDs_Init();
USB_Init();
+
+ /* Create a stdio stream for the serial port for stdin and stdout */
+ Serial_CreateStream(NULL);
}
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */
void EVENT_USB_Host_HostError(const uint8_t ErrorCode)
{
- USB_ShutDown();
+ USB_Disable();
printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"
" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);
" -- Error Code %d\r\n"
" -- Sub Error Code %d\r\n"
" -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-
+
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
}
+
projects / pub / USBasp.git / blobdiff