Change over Joystick demo HID report descriptor to use USAGE_MINIMUM and USAGE_MAXIMU...

[pub/USBasp.git] / Projects / XPLAINBridge / XPLAINBridge.txt

diff --git a/Projects/XPLAINBridge/XPLAINBridge.txt b/Projects/XPLAINBridge/XPLAINBridge.txt
index e60ff78..3532417 100644 (file)
--- a/Projects/XPLAINBridge/XPLAINBridge.txt
+++ b/Projects/XPLAINBridge/XPLAINBridge.txt
@@ -3,16 +3,16 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */

- 
+

 /** \mainpage XPLAIN UART Bridge/PDI Programmer Project
  *
 /** \mainpage XPLAIN UART Bridge/PDI Programmer Project
  *

- *  \section SSec_Compat Project Compatibility:
+ *  \section Sec_Compat Project Compatibility:

  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
  *  - AT90USB1287
  *
  *
  *  The following list indicates what microcontrollers are compatible with this project.
  *
  *  - AT90USB1287
  *

- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:

  *
  *  The following table gives a rundown of the USB utilization of this project.
  *
  *
  *  The following table gives a rundown of the USB utilization of this project.
  *


@@ -27,7 +27,7 @@
  *    <td>1) Communications Device Class (CDC)</td>
  *    <td>2) Vendor Specific Class</td>
  *   </tr>
  *    <td>1) Communications Device Class (CDC)</td>
  *    <td>2) Vendor Specific Class</td>
  *   </tr>

- *   <tr> 
+ *   <tr>

  *    <td><b>USB Subclass:</b></td>
  *    <td>1) Abstract Control Model (ACM)</td>
  *    <td>2) N/A</td>
  *    <td><b>USB Subclass:</b></td>
  *    <td>1) Abstract Control Model (ACM)</td>
  *    <td>2) N/A</td>


@@ -44,10 +44,10 @@
  *   </tr>
  *  </table>
  *
  *   </tr>
  *  </table>
  *

- *  \section SSec_Description Project Description: 
+ *  \section Sec_Description Project Description:

  *
  *  This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial
  *
  *  This project serves a dual purpose. When loaded into the USB AVR on the XPLAIN board, it will act as either a USB to Serial

- *  converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compaible PDI programmer for the XMEGA.
+ *  converter for the XPLAIN's hardware USART (at a speed of 9600 baud), or an AVRStudio compatible PDI programmer for the XMEGA.

  *  This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller.
  *
  *  When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device
  *  This project replaces the firmware preloaded onto the XPLAIN's onboard AT90USB1287 microcontroller.
  *
  *  When power to the board is applied, the TDI pin (pin 9) of the USB AVR's JTAG port is read. If the pin is left high, the device


@@ -68,7 +68,7 @@
  *
  *  This project relies on files from the LUFA AVRISP-MKII project for compilation.
  *
  *
  *  This project relies on files from the LUFA AVRISP-MKII project for compilation.
  *

- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options

  *
  *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
  *
  *
  *  The following defines can be found in this project, which can control the project behaviour when defined, or changed in value.
  *


@@ -90,4 +90,5 @@
  *        the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
  *   </tr>
  *  </table>
  *        the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
  *   </tr>
  *  </table>

- */
\ No newline at end of file
+ */
+