Documentation improvements - put driver example code into its own section, fix incorr...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / V2Protocol.c

diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.c b/Projects/AVRISP-MKII/Lib/V2Protocol.c
index 9e210c2..618dedb 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/V2Protocol.c
+++ b/Projects/AVRISP-MKII/Lib/V2Protocol.c
@@ -1,21 +1,21 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -50,22 +50,26 @@ ISR(TIMER0_COMPA_vect, ISR_NOBLOCK)
          TimeoutTicksRemaining--;
 }
 
-/** Initializes the hardware and software associated with the V2 protocol command handling. */
+/** Initialises the hardware and software associated with the V2 protocol command handling. */
 void V2Protocol_Init(void)
 {
        #if defined(ADC)
        /* Initialize the ADC converter for VTARGET level detection on supported AVR models */
        ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
        ADC_SetupChannel(VTARGET_ADC_CHANNEL);
-       ADC_StartReading(VTARGET_ADC_CHANNEL_MASK | ADC_RIGHT_ADJUSTED | ADC_REFERENCE_AVCC);
+       ADC_StartReading(ADC_REFERENCE_AVCC | ADC_RIGHT_ADJUSTED | VTARGET_ADC_CHANNEL_MASK);
        #endif
-       
+
        /* Timeout timer initialization (10ms period) */
-       OCR0A  = ((F_CPU / 1024) / 100);
+       OCR0A  = (((F_CPU / 1024) / 100) - 1);
        TCCR0A = (1 << WGM01);
        TIMSK0 = (1 << OCIE0A);
-       
+
        V2Params_LoadNonVolatileParamValues();
+       
+       #if defined(ENABLE_ISP_PROTOCOL)
+       ISPTarget_ConfigureRescueClock();
+       #endif
 }
 
 /** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host.
@@ -75,11 +79,11 @@ void V2Protocol_Init(void)
 void V2Protocol_ProcessCommand(void)
 {
        uint8_t V2Command = Endpoint_Read_Byte();
-       
+
        /* Start the timeout management timer */
        TimeoutTicksRemaining = COMMAND_TIMEOUT_TICKS;
        TCCR0B = ((1 << CS02) | (1 << CS00));
-       
+
        switch (V2Command)
        {
                case CMD_SIGN_ON:
@@ -104,7 +108,7 @@ void V2Protocol_ProcessCommand(void)
                        break;
                case CMD_PROGRAM_FLASH_ISP:
                case CMD_PROGRAM_EEPROM_ISP:
-                       ISPProtocol_ProgramMemory(V2Command);                   
+                       ISPProtocol_ProgramMemory(V2Command);
                        break;
                case CMD_READ_FLASH_ISP:
                case CMD_READ_EEPROM_ISP:
@@ -139,7 +143,7 @@ void V2Protocol_ProcessCommand(void)
                        V2Protocol_UnknownCommand(V2Command);
                        break;
        }
-       
+
        /* Disable the timeout management timer */
        TCCR0B = 0;
 
@@ -193,10 +197,10 @@ static void V2Protocol_ResetProtection(void)
        Endpoint_ClearOUT();
        Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
        Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-       
+
        Endpoint_Write_Byte(CMD_RESET_PROTECTION);
        Endpoint_Write_Byte(STATUS_CMD_OK);
-       Endpoint_ClearIN();     
+       Endpoint_ClearIN();
 }
 
 
@@ -209,18 +213,18 @@ static void V2Protocol_GetSetParam(const uint8_t V2Command)
 {
        uint8_t ParamID = Endpoint_Read_Byte();
        uint8_t ParamValue;
-       
+
        if (V2Command == CMD_SET_PARAMETER)
          ParamValue = Endpoint_Read_Byte();
 
        Endpoint_ClearOUT();
        Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
        Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-       
+
        Endpoint_Write_Byte(V2Command);
-       
+
        uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);
-       
+
        if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))
        {
                Endpoint_Write_Byte(STATUS_CMD_OK);
@@ -232,7 +236,7 @@ static void V2Protocol_GetSetParam(const uint8_t V2Command)
                Endpoint_Write_Byte(V2Params_GetParameterValue(ParamID));
        }
        else
-       {       
+       {
                Endpoint_Write_Byte(STATUS_CMD_FAILED);
        }
 
@@ -250,7 +254,7 @@ static void V2Protocol_LoadAddress(void)
        Endpoint_ClearOUT();
        Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
        Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-       
+
        if (CurrentAddress & (1UL << 31))
          MustLoadExtendedAddress = true;
 
@@ -258,3 +262,4 @@ static void V2Protocol_LoadAddress(void)
        Endpoint_Write_Byte(STATUS_CMD_OK);
        Endpoint_ClearIN();
 }
+