Auto-configure AVRISP programmer configuration when built for the XPLAIN board to...

[pub/USBasp.git] / Demos / Device / LowLevel / Keyboard / Keyboard.c

diff --git a/Demos/Device/LowLevel/Keyboard/Keyboard.c b/Demos/Device/LowLevel/Keyboard/Keyboard.c
index 32765af..4e7921f 100644 (file)
--- a/Demos/Device/LowLevel/Keyboard/Keyboard.c
+++ b/Demos/Device/LowLevel/Keyboard/Keyboard.c
@@ -84,6 +84,7 @@ void SetupHardware(void)
        Joystick_Init();\r
        LEDs_Init();\r
        USB_Init();\r
        Joystick_Init();\r
        LEDs_Init();\r
        USB_Init();\r

+       Buttons_Init();\r

 }\r
 \r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r
 }\r
 \r
 /** Event handler for the USB_Connect event. This indicates that the device is enumerating via the status LEDs and\r


@@ -257,23 +258,29 @@ void EVENT_USB_Device_StartOfFrame(void)
  */\r
 void CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData)\r
 {\r
  */\r
 void CreateKeyboardReport(USB_KeyboardReport_Data_t* ReportData)\r
 {\r

-       uint8_t JoyStatus_LCL = Joystick_GetStatus();\r
+       uint8_t JoyStatus_LCL     = Joystick_GetStatus();\r
+       uint8_t ButtonStatus_LCL  = Buttons_GetStatus();\r
+\r
+       uint8_t UsedKeyCodes      = 0;\r

 \r
        /* Clear the report contents */\r
        memset(ReportData, 0, sizeof(USB_KeyboardReport_Data_t));\r
 \r
        /* Clear the report contents */\r
        memset(ReportData, 0, sizeof(USB_KeyboardReport_Data_t));\r

-\r
+       \r

        if (JoyStatus_LCL & JOY_UP)\r
        if (JoyStatus_LCL & JOY_UP)\r

-         ReportData->KeyCode[0] = 0x04; // A\r
+         ReportData->KeyCode[UsedKeyCodes++] = 0x04; // A\r

        else if (JoyStatus_LCL & JOY_DOWN)\r
        else if (JoyStatus_LCL & JOY_DOWN)\r

-         ReportData->KeyCode[0] = 0x05; // B\r
+         ReportData->KeyCode[UsedKeyCodes++] = 0x05; // B\r

 \r
        if (JoyStatus_LCL & JOY_LEFT)\r
 \r
        if (JoyStatus_LCL & JOY_LEFT)\r

-         ReportData->KeyCode[0] = 0x06; // C\r
+         ReportData->KeyCode[UsedKeyCodes++] = 0x06; // C\r

        else if (JoyStatus_LCL & JOY_RIGHT)\r
        else if (JoyStatus_LCL & JOY_RIGHT)\r

-         ReportData->KeyCode[0] = 0x07; // D\r
+         ReportData->KeyCode[UsedKeyCodes++] = 0x07; // D\r

 \r
        if (JoyStatus_LCL & JOY_PRESS)\r
 \r
        if (JoyStatus_LCL & JOY_PRESS)\r

-         ReportData->KeyCode[0] = 0x08; // E\r
+         ReportData->KeyCode[UsedKeyCodes++] = 0x08; // E\r
+         \r
+       if (ButtonStatus_LCL & BUTTONS_BUTTON1)\r
+         ReportData->KeyCode[UsedKeyCodes++] = 0x09; // F\r

 }\r
 \r
 /** Processes a received LED report, and updates the board LEDs states to match.\r
 }\r
 \r
 /** Processes a received LED report, and updates the board LEDs states to match.\r


@@ -310,9 +317,6 @@ void SendNextReport(void)
        /* Check to see if the report data has changed - if so a report MUST be sent */\r
        SendReport = (memcmp(&PrevKeyboardReportData, &KeyboardReportData, sizeof(USB_KeyboardReport_Data_t)) != 0);\r
        \r
        /* Check to see if the report data has changed - if so a report MUST be sent */\r
        SendReport = (memcmp(&PrevKeyboardReportData, &KeyboardReportData, sizeof(USB_KeyboardReport_Data_t)) != 0);\r
        \r

-       /* Save the current report data for later comparison to check for changes */\r
-       PrevKeyboardReportData = KeyboardReportData;\r
-       \r

        /* Check if the idle period is set and has elapsed */\r
        if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))\r
        {\r
        /* Check if the idle period is set and has elapsed */\r
        if ((IdleCount != HID_IDLE_CHANGESONLY) && (!(IdleMSRemaining)))\r
        {\r


@@ -329,6 +333,9 @@ void SendNextReport(void)
        /* Check if Keyboard Endpoint Ready for Read/Write and if we should send a new report */\r
        if (Endpoint_IsReadWriteAllowed() && SendReport)\r
        {\r
        /* Check if Keyboard Endpoint Ready for Read/Write and if we should send a new report */\r
        if (Endpoint_IsReadWriteAllowed() && SendReport)\r
        {\r

+               /* Save the current report data for later comparison to check for changes */\r
+               PrevKeyboardReportData = KeyboardReportData;\r
+       \r

                /* Write Keyboard Report Data */\r
                Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));\r
                \r
                /* Write Keyboard Report Data */\r
                Endpoint_Write_Stream_LE(&KeyboardReportData, sizeof(KeyboardReportData));\r
                \r