/*\r
LUFA Library\r
- Copyright (C) Dean Camera, 2010.\r
+ Copyright (C) Dean Camera, 2011.\r
\r
dean [at] fourwalledcubicle [dot] com\r
- www.fourwalledcubicle.com\r
+ www.lufa-lib.org\r
*/\r
\r
/*\r
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+ Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
\r
Permission to use, copy, modify, distribute, and sell this \r
software and its documentation for any purpose is hereby granted\r
};\r
\r
/** Current TMC control request that is being processed */\r
-uint8_t RequestInProgress = 0;\r
+static uint8_t RequestInProgress = 0;\r
\r
/** Stream callback abort flag for bulk IN data */\r
-bool IsTMCBulkINReset = false;\r
+static bool IsTMCBulkINReset = false;\r
\r
/** Stream callback abort flag for bulk OUT data */\r
-bool IsTMCBulkOUTReset = false;\r
+static bool IsTMCBulkOUTReset = false;\r
\r
/** Last used tag value for data transfers */\r
-uint8_t CurrentTransferTag = 0;\r
+static uint8_t CurrentTransferTag = 0;\r
\r
+/** Length of last data transfer, for reporting to the host in case an in-progress transfer is aborted */\r
+static uint32_t LastTransferLength = 0;\r
\r
/** Main program entry point. This routine contains the overall program flow, including initial\r
* setup of all components and the main program loop.\r
*/\r
void EVENT_USB_Device_ConfigurationChanged(void)\r
{\r
- LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
-\r
- /* Setup TMC In and Out Endpoints */\r
- if (!(Endpoint_ConfigureEndpoint(TMC_IN_EPNUM, EP_TYPE_BULK,\r
- ENDPOINT_DIR_IN, TMC_IO_EPSIZE,\r
- ENDPOINT_BANK_SINGLE)))\r
- {\r
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
- }\r
-\r
- if (!(Endpoint_ConfigureEndpoint(TMC_OUT_EPNUM, EP_TYPE_BULK,\r
- ENDPOINT_DIR_OUT, TMC_IO_EPSIZE,\r
- ENDPOINT_BANK_SINGLE)))\r
- {\r
- LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
- }\r
+ bool ConfigSuccess = true;\r
+\r
+ /* Setup TMC In, Out and Notification Endpoints */\r
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_NOTIFICATION_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,\r
+ TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE);\r
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_IN_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_IN,\r
+ TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE);\r
+ ConfigSuccess &= Endpoint_ConfigureEndpoint(TMC_OUT_EPNUM, EP_TYPE_BULK, ENDPOINT_DIR_OUT,\r
+ TMC_IO_EPSIZE, ENDPOINT_BANK_SINGLE);\r
+\r
+ /* Indicate endpoint configuration success or failure */\r
+ LEDs_SetAllLEDs(ConfigSuccess ? LEDMASK_USB_READY : LEDMASK_USB_ERROR);\r
}\r
\r
-/** Event handler for the USB_UnhandledControlRequest event. This is used to catch standard and class specific\r
- * control requests that are not handled internally by the USB library (including the CDC control commands,\r
- * which are all issued via the control endpoint), so that they can be handled appropriately for the application.\r
+/** Event handler for the USB_ControlRequest event. This is used to catch and process control requests sent to\r
+ * the device from the USB host before passing along unhandled control requests to the library for processing\r
+ * internally.\r
*/\r
-void EVENT_USB_Device_UnhandledControlRequest(void)\r
+void EVENT_USB_Device_ControlRequest(void)\r
{\r
uint8_t TMCRequestStatus = TMC_STATUS_SUCCESS;\r
\r
case Req_InitiateAbortBulkOut:\r
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))\r
{\r
- Endpoint_ClearSETUP();\r
- \r
/* Check that no split transaction is already in progress and the data transfer tag is valid */\r
if (RequestInProgress != 0)\r
{\r
/* Save the split request for later checking when a new request is received */\r
RequestInProgress = Req_InitiateAbortBulkOut;\r
}\r
+\r
+ Endpoint_ClearSETUP();\r
\r
/* Write the request response byte */\r
- Endpoint_Write_Byte(TMCRequestStatus);\r
+ Endpoint_Write_8(TMCRequestStatus);\r
\r
Endpoint_ClearIN();\r
Endpoint_ClearStatusStage();\r
case Req_CheckAbortBulkOutStatus:\r
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))\r
{\r
- Endpoint_ClearSETUP();\r
- \r
/* Check that an ABORT BULK OUT transaction has been requested and that the request has completed */\r
if (RequestInProgress != Req_InitiateAbortBulkOut)\r
TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS; \r
else if (IsTMCBulkOUTReset)\r
TMCRequestStatus = TMC_STATUS_PENDING;\r
else\r
- RequestInProgress = 0; \r
- \r
+ RequestInProgress = 0; \r
+\r
+ Endpoint_ClearSETUP();\r
+ \r
/* Write the request response bytes */\r
- Endpoint_Write_Byte(TMCRequestStatus);\r
- Endpoint_Write_Word_LE(0);\r
- Endpoint_Write_DWord_LE(0); // TODO - Last transfer length\r
+ Endpoint_Write_8(TMCRequestStatus);\r
+ Endpoint_Write_16_LE(0);\r
+ Endpoint_Write_32_LE(LastTransferLength);\r
\r
Endpoint_ClearIN();\r
Endpoint_ClearStatusStage(); \r
case Req_InitiateAbortBulkIn:\r
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))\r
{\r
- Endpoint_ClearSETUP();\r
- \r
/* Check that no split transaction is already in progress and the data transfer tag is valid */\r
if (RequestInProgress != 0)\r
{\r
/* Save the split request for later checking when a new request is received */\r
RequestInProgress = Req_InitiateAbortBulkIn;\r
}\r
+\r
+ Endpoint_ClearSETUP();\r
\r
/* Write the request response bytes */\r
- Endpoint_Write_Byte(TMCRequestStatus);\r
- Endpoint_Write_Byte(CurrentTransferTag);\r
+ Endpoint_Write_8(TMCRequestStatus);\r
+ Endpoint_Write_8(CurrentTransferTag);\r
\r
Endpoint_ClearIN();\r
Endpoint_ClearStatusStage();\r
case Req_CheckAbortBulkInStatus:\r
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_ENDPOINT))\r
{\r
- Endpoint_ClearSETUP();\r
- \r
/* Check that an ABORT BULK IN transaction has been requested and that the request has completed */\r
if (RequestInProgress != Req_InitiateAbortBulkIn)\r
TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS;\r
TMCRequestStatus = TMC_STATUS_PENDING;\r
else\r
RequestInProgress = 0;\r
- \r
+\r
+ Endpoint_ClearSETUP();\r
+ \r
/* Write the request response bytes */\r
- Endpoint_Write_Byte(TMCRequestStatus);\r
- Endpoint_Write_Word_LE(0);\r
- Endpoint_Write_DWord_LE(0); // TODO - Last transfer length\r
+ Endpoint_Write_8(TMCRequestStatus);\r
+ Endpoint_Write_16_LE(0);\r
+ Endpoint_Write_32_LE(LastTransferLength);\r
\r
Endpoint_ClearIN();\r
Endpoint_ClearStatusStage();\r
case Req_InitiateClear:\r
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
{\r
- Endpoint_ClearSETUP();\r
- \r
/* Check that no split transaction is already in progress */\r
if (RequestInProgress != 0)\r
{\r
- Endpoint_Write_Byte(TMC_STATUS_SPLIT_IN_PROGRESS); \r
+ Endpoint_Write_8(TMC_STATUS_SPLIT_IN_PROGRESS); \r
}\r
else\r
{\r
/* Save the split request for later checking when a new request is received */\r
RequestInProgress = Req_InitiateClear;\r
}\r
+\r
+ Endpoint_ClearSETUP();\r
\r
/* Write the request response byte */\r
- Endpoint_Write_Byte(TMCRequestStatus);\r
+ Endpoint_Write_8(TMCRequestStatus);\r
\r
Endpoint_ClearIN();\r
Endpoint_ClearStatusStage();\r
case Req_CheckClearStatus:\r
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
{\r
- Endpoint_ClearSETUP();\r
- \r
/* Check that a CLEAR transaction has been requested and that the request has completed */\r
if (RequestInProgress != Req_InitiateClear)\r
TMCRequestStatus = TMC_STATUS_SPLIT_NOT_IN_PROGRESS; \r
TMCRequestStatus = TMC_STATUS_PENDING;\r
else\r
RequestInProgress = 0;\r
- \r
+\r
+ Endpoint_ClearSETUP();\r
+\r
/* Write the request response bytes */\r
- Endpoint_Write_Byte(TMCRequestStatus);\r
- Endpoint_Write_Byte(0);\r
+ Endpoint_Write_8(TMCRequestStatus);\r
+ Endpoint_Write_8(0);\r
\r
Endpoint_ClearIN();\r
Endpoint_ClearStatusStage(); \r
case Req_GetCapabilities:\r
if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))\r
{\r
- /* Acknowledge the SETUP packet, ready for data transfer */\r
Endpoint_ClearSETUP();\r
\r
/* Write the device capabilities to the control endpoint */\r
- Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t));\r
- \r
- /* Finalize the stream transfer to send the last packet or clear the host abort */\r
+ Endpoint_Write_Control_Stream_LE(&Capabilities, sizeof(TMC_Capabilities_t)); \r
Endpoint_ClearOUT();\r
}\r
\r
return;\r
\r
TMC_MessageHeader_t MessageHeader;\r
+ uint16_t BytesTransferred;\r
\r
/* Try to read in a TMC message from the interface, process if one is available */\r
if (ReadTMCHeader(&MessageHeader))\r
switch (MessageHeader.MessageID)\r
{\r
case TMC_MESSAGEID_DEV_DEP_MSG_OUT:\r
- Endpoint_Discard_Stream(MessageHeader.TransferSize, StreamCallback_AbortOUTOnRequest);\r
+ BytesTransferred = 0;\r
+ while (Endpoint_Discard_Stream(MessageHeader.TransferSize, &BytesTransferred) ==\r
+ ENDPOINT_RWSTREAM_IncompleteTransfer)\r
+ {\r
+ if (IsTMCBulkOUTReset)\r
+ break;\r
+ }\r
+ LastTransferLength = BytesTransferred;\r
+ \r
Endpoint_ClearOUT();\r
break;\r
case TMC_MESSAGEID_DEV_DEP_MSG_IN:\r
Endpoint_ClearOUT();\r
+ \r
+ char MessageData[] = "TMC Class Test";\r
\r
- MessageHeader.TransferSize = 3;\r
+ MessageHeader.TransferSize = strlen(MessageData);\r
+ MessageHeader.MessageIDSpecific.DeviceOUT.LastMessageTransaction = true;\r
WriteTMCHeader(&MessageHeader);\r
\r
- Endpoint_Write_Stream_LE("TMC", 3, StreamCallback_AbortINOnRequest);\r
+ BytesTransferred = 0;\r
+ while (Endpoint_Write_Stream_LE(MessageData, MessageHeader.TransferSize, &BytesTransferred) ==\r
+ ENDPOINT_RWSTREAM_IncompleteTransfer)\r
+ {\r
+ if (IsTMCBulkINReset)\r
+ break;\r
+ }\r
+ LastTransferLength = BytesTransferred;\r
+\r
Endpoint_ClearIN();\r
break;\r
default:\r
*/\r
bool ReadTMCHeader(TMC_MessageHeader_t* const MessageHeader)\r
{\r
+ uint16_t BytesTransferred;\r
+ uint8_t ErrorCode;\r
+\r
/* Select the Data Out endpoint */\r
Endpoint_SelectEndpoint(TMC_OUT_EPNUM);\r
\r
return false;\r
\r
/* Read in the header of the command from the host */\r
- Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), StreamCallback_AbortOUTOnRequest);\r
+ BytesTransferred = 0;\r
+ while ((ErrorCode = Endpoint_Read_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==\r
+ ENDPOINT_RWSTREAM_IncompleteTransfer)\r
+ {\r
+ if (IsTMCBulkOUTReset)\r
+ break;\r
+ }\r
\r
/* Store the new command tag value for later use */\r
CurrentTransferTag = MessageHeader->Tag;\r
\r
/* Indicate if the command has been aborted or not */\r
- return !(IsTMCBulkOUTReset);\r
+ return (!(IsTMCBulkOUTReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));\r
}\r
\r
bool WriteTMCHeader(TMC_MessageHeader_t* const MessageHeader)\r
{\r
- /* Compute the next transfer tag value, must be between 1 and 254 */\r
- if (++CurrentTransferTag == 0xFF)\r
- CurrentTransferTag = 1;\r
+ uint16_t BytesTransferred;\r
+ uint8_t ErrorCode;\r
\r
/* Set the message tag of the command header */\r
MessageHeader->Tag = CurrentTransferTag;\r
Endpoint_SelectEndpoint(TMC_IN_EPNUM);\r
\r
/* Send the command header to the host */\r
- Endpoint_Write_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), StreamCallback_AbortINOnRequest);\r
+ BytesTransferred = 0;\r
+ while ((ErrorCode = Endpoint_Write_Stream_LE(MessageHeader, sizeof(TMC_MessageHeader_t), &BytesTransferred)) ==\r
+ ENDPOINT_RWSTREAM_IncompleteTransfer)\r
+ {\r
+ if (IsTMCBulkINReset)\r
+ break;\r
+ }\r
\r
/* Indicate if the command has been aborted or not */\r
- return !(IsTMCBulkINReset);\r
-}\r
-\r
-/** Stream callback function for the Endpoint stream write functions. This callback will abort the current stream transfer\r
- * if a TMC Abort Bulk IN request has been issued to the control endpoint.\r
- */\r
-uint8_t StreamCallback_AbortINOnRequest(void)\r
-{ \r
- /* Abort if a TMC Bulk Data IN abort was received */\r
- if (IsTMCBulkINReset)\r
- return STREAMCALLBACK_Abort;\r
- \r
- /* Continue with the current stream operation */\r
- return STREAMCALLBACK_Continue;\r
-}\r
-\r
-/** Stream callback function for the Endpoint stream read functions. This callback will abort the current stream transfer\r
- * if a TMC Abort Bulk OUT request has been issued to the control endpoint.\r
- */\r
-uint8_t StreamCallback_AbortOUTOnRequest(void)\r
-{ \r
- /* Abort if a TMC Bulk Data IN abort was received */\r
- if (IsTMCBulkOUTReset)\r
- return STREAMCALLBACK_Abort;\r
- \r
- /* Continue with the current stream operation */\r
- return STREAMCALLBACK_Continue;\r
+ return (!(IsTMCBulkINReset) && (ErrorCode == ENDPOINT_RWSTREAM_NoError));\r
}\r
projects / pub / USBasp.git / blobdiff