*
* \section Sec_Dependencies Module Source Dependencies
* The following files must be built with any user project that uses this module:
- * - LUFA/Drivers/USB/Class/Host/Printer.c
+ * - LUFA/Drivers/USB/Class/Host/Printer.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
*
* \section Module Description
* Host Mode USB Class driver framework interface, for the Printer USB Class driver.
{
const struct
{
- uint8_t DataINPipeNumber; /**< Pipe number of the Printer interface's IN data pipe */
- bool DataINPipeDoubleBank; /**< Indicates if the Printer interface's IN data pipe should use double banking */
+ uint8_t DataINPipeNumber; /**< Pipe number of the Printer interface's IN data pipe. */
+ bool DataINPipeDoubleBank; /**< Indicates if the Printer interface's IN data pipe should use double banking. */
- uint8_t DataOUTPipeNumber; /**< Pipe number of the Printer interface's OUT data pipe */
- bool DataOUTPipeDoubleBank; /**< Indicates if the Printer interface's OUT data pipe should use double banking */
+ uint8_t DataOUTPipeNumber; /**< Pipe number of the Printer interface's OUT data pipe. */
+ bool DataOUTPipeDoubleBank; /**< Indicates if the Printer interface's OUT data pipe should use double banking. */
} Config; /**< Config data for the USB class interface within the device. All elements in this section
* <b>must</b> be set or the interface will fail to enumerate and operate correctly.
*/
{
bool IsActive; /**< Indicates if the current interface instance is connected to an attached device, valid
* after \ref PRNT_Host_ConfigurePipes() is called and the Host state machine is in the
- * Configured state
+ * Configured state.
*/
- uint8_t InterfaceNumber; /**< Interface index of the Printer interface within the attached device */
- uint8_t AlternateSetting; /**< Alternate setting within the Printer Interface in the attached device */
+ uint8_t InterfaceNumber; /**< Interface index of the Printer interface within the attached device. */
+ uint8_t AlternateSetting; /**< Alternate setting within the Printer Interface in the attached device. */
- uint16_t DataINPipeSize; /**< Size in bytes of the Printer interface's IN data pipe */
- uint16_t DataOUTPipeSize; /**< Size in bytes of the Printer interface's OUT data pipe */
+ uint16_t DataINPipeSize; /**< Size in bytes of the Printer interface's IN data pipe. */
+ uint16_t DataOUTPipeSize; /**< Size in bytes of the Printer interface's OUT data pipe. */
} State; /**< State data for the USB class interface within the device. All elements in this section
* <b>may</b> be set to initial values, but may also be ignored to default to sane values when
* the interface is enumerated.
} USB_ClassInfo_PRNT_Host_t;
/* Enums: */
- enum PRNTHost_EnumerationFailure_ErrorCodes_t
+ enum PRNT_Host_EnumerationFailure_ErrorCodes_t
{
- PRNT_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully */
- PRNT_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor */
- PRNT_ENUMERROR_NoPrinterInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor */
- PRNT_ENUMERROR_EndpointsNotFound = 3, /**< Compatible Printer endpoints were not found in the device's interfaces */
+ PRNT_ENUMERROR_NoError = 0, /**< Configuration Descriptor was processed successfully. */
+ PRNT_ENUMERROR_InvalidConfigDescriptor = 1, /**< The device returned an invalid Configuration Descriptor. */
+ PRNT_ENUMERROR_NoPrinterInterfaceFound = 2, /**< A compatible Printer interface was not found in the device's Configuration Descriptor. */
+ PRNT_ENUMERROR_EndpointsNotFound = 3, /**< Compatible Printer endpoints were not found in the device's interfaces. */
};
/* Function Prototypes: */
+ /** General management task for a given Printer host class interface, required for the correct operation of
+ * the interface. This should be called frequently in the main program loop, before the master USB management task
+ * \ref USB_USBTask().
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ */
+ void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
/** Host interface configuration routine, to configure a given Printer host interface instance using the
* Configuration Descriptor read from an attached USB device. This function automatically updates the given Printer
* instance's state values and configures the pipes required to communicate with the interface if it is found within
* the device. This should be called once after the stack has enumerated the attached device, while the host state
* machine is in the Addressed state.
*
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
- * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor
- * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[in] ConfigDescriptorSize Length of the attached device's Configuration Descriptor.
+ * \param[in] DeviceConfigDescriptor Pointer to a buffer containing the attached device's Configuration Descriptor.
*
- * \return A value from the \ref PRNTHost_EnumerationFailure_ErrorCodes_t enum
+ * \return A value from the \ref PRNT_Host_EnumerationFailure_ErrorCodes_t enum.
*/
- uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint16_t ConfigDescriptorSize,
+ uint8_t PRNT_Host_ConfigurePipes(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ uint16_t ConfigDescriptorSize,
void* DeviceConfigDescriptor) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(3);
/** Configures the printer to enable Bidirectional mode, if it is not already in this mode. This should be called
* once the connected device's configuration has been set, to ensure the printer is ready to accept commands.
*
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
*
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
uint8_t PRNT_Host_SetBidirectionalMode(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
/** Retrieves the status of the virtual Printer port's inbound status lines. The result can then be masked against the
* PRNT_PORTSTATUS_* macros to determine the printer port's status.
*
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
- * \param[out] PortStatus Location where the retrieved port status should be stored
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[out] PortStatus Location where the retrieved port status should be stored.
*
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
- uint8_t PRNT_Host_GetPortStatus(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, uint8_t* const PortStatus)
+ uint8_t PRNT_Host_GetPortStatus(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ uint8_t* const PortStatus)
ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/** Soft-resets the attached printer, readying it for new commands.
*
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
*
- * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum
+ * \return A value from the \ref USB_Host_SendControlErrorCodes_t enum.
*/
uint8_t PRNT_Host_SoftReset(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+ /** Flushes any data waiting to be sent, ensuring that the send buffer is cleared.
+ *
+ * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ *
+ * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
+ */
+ uint8_t PRNT_Host_Flush(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
+
/** Sends the given raw data stream to the attached printer's input endpoint. This should contain commands that the
* printer is able to understand - for example, PCL data. Not all printers accept all printer languages; see
* \ref PRNT_Host_GetDeviceID() for details on determining acceptable languages for an attached printer.
*
- * \note This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
- * call will fail.
+ * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[in] Buffer Pointer to a buffer containing the raw command stream to send to the printer.
+ * \param[in] Length Size in bytes of the command stream to be sent.
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t PRNT_Host_SendString(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ void* Buffer,
+ const uint16_t Length) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+
+ /** Sends a given byte to the attached USB device, if connected. If a device is not connected when the function is called, the
+ * byte is discarded. Bytes will be queued for transmission to the device until either the pipe bank becomes full, or the
+ * \ref PRNT_Host_Flush() function is called to flush the pending data to the host. This allows for multiple bytes to be
+ * packed into a single pipe packet, increasing data throughput.
*
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
- * \param[in] PrinterCommands Pointer to a buffer containing the raw command stream to send to the printer
- * \param[in] CommandSize Size in bytes of the command stream to be sent
+ * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
*
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[in] Data Byte of data to send to the device.
+ *
+ * \return A value from the \ref Pipe_WaitUntilReady_ErrorCodes_t enum.
*/
- uint8_t PRNT_Host_SendData(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, void* PrinterCommands,
- uint16_t CommandSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
+ uint8_t PRNT_Host_SendByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ const uint8_t Data) ATTR_NON_NULL_PTR_ARG(1);
+ /** Determines the number of bytes received by the printer interface from the device, waiting to be read. This indicates the number
+ * of bytes in the IN pipe bank only, and thus the number of calls to \ref PRNT_Host_ReceiveByte() which are guaranteed to succeed
+ * immediately. If multiple bytes are to be received, they should be buffered by the user application, as the pipe bank will not be
+ * released back to the USB controller until all bytes are read.
+ *
+ * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ *
+ * \return Total number of buffered bytes received from the device.
+ */
+ uint16_t PRNT_Host_BytesReceived(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo);
+
+ /** Reads a byte of data from the device. If no data is waiting to be read of if a USB device is not connected, the function
+ * returns a negative value. The \ref PRNT_Host_BytesReceived() function may be queried in advance to determine how many bytes
+ * are currently buffered in the Printer interface's data receive pipe.
+ *
+ * \pre This function must only be called when the Host state machine is in the HOST_STATE_Configured state or the
+ * call will fail.
+ *
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ *
+ * \return Next received byte from the device, or a negative value if no data received.
+ */
+ int16_t PRNT_Host_ReceiveByte(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo);
+
/** Retrieves the attached printer device's ID string, formatted according to IEEE 1284. This string is sent as a
* Unicode string from the device and is automatically converted to an ASCII encoded C string by this function, thus
* the maximum reportable string length is two less than the size given (to accommodate the Unicode string length
*
* This string, when supported, contains the model, manufacturer and acceptable printer languages for the attached device.
*
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
- * \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format
- * \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string
+ * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state.
+ * \param[out] DeviceIDString Pointer to a buffer where the Device ID string should be stored, in ASCII format.
+ * \param[in] BufferSize Size in bytes of the buffer allocated for the Device ID string.
*
- * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t PRNT_Host_GetDeviceID(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo, char* DeviceIDString,
- uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
-
- /* Inline Functions: */
- /** General management task for a given Printer host class interface, required for the correct operation of
- * the interface. This should be called frequently in the main program loop, before the master USB management task
- * \ref USB_USBTask().
- *
- * \param[in,out] PRNTInterfaceInfo Pointer to a structure containing a Printer Class host configuration and state
- */
- static inline void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1);
- static inline void PRNT_Host_USBTask(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo)
- {
- (void)PRNTInterfaceInfo;
- }
+ uint8_t PRNT_Host_GetDeviceID(USB_ClassInfo_PRNT_Host_t* const PRNTInterfaceInfo,
+ char* const DeviceIDString,
+ const uint16_t BufferSize) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2);
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
projects / pub / USBasp.git / blobdiff