Add OBJDIR optional build variable to the BULD build system module, to allow the...

[pub/USBasp.git] / Demos / Host / ClassDriver / MassStorageHost / MassStorageHost.txt

diff --git a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
index 45d78c4..4b07261 100644 (file)
--- a/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
+++ b/Demos/Host/ClassDriver/MassStorageHost/MassStorageHost.txt
@@ -6,13 +6,13 @@
 
 /** \mainpage Mass Storage Host Demo
  *
 
 /** \mainpage Mass Storage Host Demo
  *

- *  \section SSec_Compat Demo Compatibility:
+ *  \section Sec_Compat Demo Compatibility:

  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *
  *
  *  The following list indicates what microcontrollers are compatible with this demo.
  *

- *  - Series 7 USB AVRs (AT90USBxxx7)
+ *  \li Series 7 USB AVRs (AT90USBxxx7)

  *
  *

- *  \section SSec_Info USB Information:
+ *  \section Sec_Info USB Information:

  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *
  *
  *  The following table gives a rundown of the USB utilization of this demo.
  *


@@ -37,12 +37,12 @@
  *        SCSI Block Commands Specification</td>
  *   </tr>
  *   <tr>
  *        SCSI Block Commands Specification</td>
  *   </tr>
  *   <tr>

- *    <td><b>Usable Speeds:</b></td>
+ *    <td><b>Supported USB Speeds:</b></td>

  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *
  *    <td>Full Speed Mode</td>
  *   </tr>
  *  </table>
  *

- *  \section SSec_Description Project Description:
+ *  \section Sec_Description Project Description:

  *
  *  Mass Storage host demonstration application. This gives a simple reference
  *  application for implementing a USB Mass Storage host, for USB storage devices
  *
  *  Mass Storage host demonstration application. This gives a simple reference
  *  application for implementing a USB Mass Storage host, for USB storage devices


@@ -53,7 +53,7 @@
  *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
  *  of the disk will be dumped to the serial port.
  *
  *  AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
  *  of the disk will be dumped to the serial port.
  *

- *  \section SSec_Options Project Options
+ *  \section Sec_Options Project Options

  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *
  *
  *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
  *