Fix incorrect macro guard in the UC3 EndpointStream header file.

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / TINYNVM.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index 7522dc8..891ae8d 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
-     Copyright (C) Dean Camera, 2010.
+     Copyright (C) Dean Camera, 2011.
 
   dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
+           www.lufa-lib.org
 */
 
 /*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
@@ -43,9 +43,9 @@ static void TINYNVM_SendPointerAddress(const uint16_t AbsoluteAddress)
 {
        /* Send the given 16-bit address to the target, LSB first */
        XPROGTarget_SendByte(TPI_CMD_SSTPR | 0);
-       XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[0]);
+       XPROGTarget_SendByte(AbsoluteAddress & 0xFF);
        XPROGTarget_SendByte(TPI_CMD_SSTPR | 1);
-       XPROGTarget_SendByte(((uint8_t*)&AbsoluteAddress)[1]);
+       XPROGTarget_SendByte(AbsoluteAddress >> 8);
 }
 
 /** Sends a SIN command to the target with the specified I/O address, ready for the data byte to be written.
@@ -85,7 +85,7 @@ bool TINYNVM_WaitWhileNVMBusBusy(void)
                uint8_t StatusRegister = XPROGTarget_ReceiveByte();
 
                /* We might have timed out waiting for the status register read response, check here */
-               if (!(TimeoutTicksRemaining))
+               if (TimeoutExpired)
                  return false;
 
                /* Check the status register read response to see if the NVM bus is enabled */
@@ -110,7 +110,7 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
                uint8_t StatusRegister = XPROGTarget_ReceiveByte();
 
                /* We might have timed out waiting for the status register read response, check here */
-               if (!(TimeoutTicksRemaining))
+               if (TimeoutExpired)
                  return false;
 
                /* Check to see if the BUSY flag is still set */
@@ -119,6 +119,40 @@ bool TINYNVM_WaitWhileNVMControllerBusy(void)
        }
 }
 
+/** Enables the physical TPI interface on the target and enables access to the internal NVM controller.
+ *
+ *  \return Boolean true if the TPI interface was enabled successfully, false otherwise
+ */
+bool TINYNVM_EnableTPI(void)
+{
+       /* Enable TPI programming mode with the attached target */
+       XPROGTarget_EnableTargetTPI();
+
+       /* Lower direction change guard time to 0 USART bits */
+       XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
+       XPROGTarget_SendByte(0x07);
+
+       /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
+       XPROGTarget_SendByte(TPI_CMD_SKEY);
+       for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
+         XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
+
+       /* Wait until the NVM bus becomes active */
+       return TINYNVM_WaitWhileNVMBusBusy();
+}
+
+/** Removes access to the target's NVM controller and physically disables the target's physical TPI interface. */
+void TINYNVM_DisableTPI(void)
+{
+       TINYNVM_WaitWhileNVMBusBusy();
+
+       /* Clear the NVMEN bit in the TPI STATUS register to disable TPI mode */
+       XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_STATUS_REG);
+       XPROGTarget_SendByte(0x00);
+
+       XPROGTarget_DisableTargetTPI();
+}
+
 /** Reads memory from the target's memory spaces.
  *
  *  \param[in]  ReadAddress  Start address to read from within the target's address space
@@ -142,14 +176,14 @@ bool TINYNVM_ReadMemory(const uint16_t ReadAddress,
        /* Send the address of the location to read from */
        TINYNVM_SendPointerAddress(ReadAddress);
 
-       while (ReadSize-- && TimeoutTicksRemaining)
+       while (ReadSize-- && !(TimeoutExpired))
        {
                /* Read the byte of data from the target */
                XPROGTarget_SendByte(TPI_CMD_SLD | TPI_POINTER_INDIRECT_PI);
                *(ReadBuffer++) = XPROGTarget_ReceiveByte();
        }
 
-       return (TimeoutTicksRemaining != 0);
+       return (TimeoutExpired == false);
 }
 
 /** Writes word addressed memory to the target's memory spaces.