/*
LUFA Library
- Copyright (C) Dean Camera, 2010.
+ Copyright (C) Dean Camera, 2012.
dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
+ www.lufa-lib.org
*/
/*
- Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+ Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
Copyright 2010 Matthias Hullin (lufa [at] matthias [dot] hullin [dot] net)
Permission to use, copy, modify, distribute, and sell this
#include "Descriptors.h"
-/* On some devices, there is a factory set internal serial number which can be automatically sent to the host as
- * the device's serial number when the Device Descriptor's .SerialNumStrIndex entry is set to USE_INTERNAL_SERIAL.
- * This allows the host to track a device across insertions on different ports, allowing them to retain allocated
- * resources like COM port numbers and drivers. On demos using this feature, give a warning on unsupported devices
- * so that the user can supply their own serial number descriptor instead or remove the USE_INTERNAL_SERIAL value
- * from the Device Descriptor (forcing the host to generate a serial number for each device from the VID, PID and
- * port location).
- */
-#if (USE_INTERNAL_SERIAL == NO_DESCRIPTOR)
- #warning USE_INTERNAL_SERIAL is not available on this AVR - please manually construct a device serial descriptor.
-#endif
/** HID class report descriptor. This is a special descriptor constructed with values from the
* USBIF HID class specification to describe the reports and capabilities of the HID device. This
* the device will send, and what it may be sent back from the host. Refer to the HID specification for
* more details on HID report descriptors.
*/
-USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
+const USB_Descriptor_HIDReport_Datatype_t PROGMEM KeyboardReport[] =
{
- 0x05, 0x01, /* Usage Page (Generic Desktop) */
- 0x09, 0x06, /* Usage (Keyboard) */
- 0xa1, 0x01, /* Collection (Application) */
- 0x75, 0x01, /* Report Size (1) */
- 0x95, 0x08, /* Report Count (8) */
- 0x05, 0x07, /* Usage Page (Key Codes) */
- 0x19, 0xe0, /* Usage Minimum (Keyboard LeftControl) */
- 0x29, 0xe7, /* Usage Maximum (Keyboard Right GUI) */
- 0x15, 0x00, /* Logical Minimum (0) */
- 0x25, 0x01, /* Logical Maximum (1) */
- 0x81, 0x02, /* Input (Data, Variable, Absolute) */
- 0x95, 0x01, /* Report Count (1) */
- 0x75, 0x08, /* Report Size (8) */
- 0x81, 0x03, /* Input (Const, Variable, Absolute) */
- 0x95, 0x05, /* Report Count (5) */
- 0x75, 0x01, /* Report Size (1) */
- 0x05, 0x08, /* Usage Page (LEDs) */
- 0x19, 0x01, /* Usage Minimum (Num Lock) */
- 0x29, 0x05, /* Usage Maximum (Kana) */
- 0x91, 0x02, /* Output (Data, Variable, Absolute) */
- 0x95, 0x01, /* Report Count (1) */
- 0x75, 0x03, /* Report Size (3) */
- 0x91, 0x03, /* Output (Const, Variable, Absolute) */
- 0x95, 0x06, /* Report Count (6) */
- 0x75, 0x08, /* Report Size (8) */
- 0x15, 0x00, /* Logical Minimum (0) */
- 0x25, 0x65, /* Logical Maximum (101) */
- 0x05, 0x07, /* Usage Page (Keyboard) */
- 0x19, 0x00, /* Usage Minimum (Reserved (no event indicated)) */
- 0x29, 0x65, /* Usage Maximum (Keyboard Application) */
- 0x81, 0x00, /* Input (Data, Array, Absolute) */
- 0xc0 /* End Collection */
+ /* Use the HID class driver's standard Keyboard report.
+ * Max simultaneous keys: 6
+ */
+ HID_DESCRIPTOR_KEYBOARD(6)
};
/** Device descriptor structure. This descriptor, located in FLASH memory, describes the overall
* number of device configurations. The descriptor is read out by the USB host when the enumeration
* process begins.
*/
-USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
+const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
{
.Header = {.Size = sizeof(USB_Descriptor_Device_t), .Type = DTYPE_Device},
.USBSpecification = VERSION_BCD(01.10),
- .Class = 0x00,
- .SubClass = 0x00,
- .Protocol = 0x00,
+ .Class = USB_CSCP_NoDeviceClass,
+ .SubClass = USB_CSCP_NoDeviceSubclass,
+ .Protocol = USB_CSCP_NoDeviceProtocol,
.Endpoint0Size = FIXED_CONTROL_ENDPOINT_SIZE,
* and endpoints. The descriptor is read out by the USB host during the enumeration process when selecting
* a configuration so that the host may correctly communicate with the USB device.
*/
-USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
+const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
{
.Config =
{
.ConfigurationNumber = 1,
.ConfigurationStrIndex = NO_DESCRIPTOR,
- .ConfigAttributes = USB_CONFIG_ATTR_BUSPOWERED,
+ .ConfigAttributes = USB_CONFIG_ATTR_RESERVED,
.MaxPowerConsumption = USB_CONFIG_POWER_MA(100)
},
.TotalEndpoints = 2,
- .Class = 0x08,
- .SubClass = 0x06,
- .Protocol = 0x50,
+ .Class = MS_CSCP_MassStorageClass,
+ .SubClass = MS_CSCP_SCSITransparentSubclass,
+ .Protocol = MS_CSCP_BulkOnlyTransportProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
- .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | MASS_STORAGE_IN_EPNUM),
- .Attributes = EP_TYPE_BULK,
+ .EndpointAddress = MASS_STORAGE_IN_EPADDR,
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
- .PollingIntervalMS = 0x00
+ .PollingIntervalMS = 0x05
},
.MS_DataOutEndpoint =
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
- .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_OUT | MASS_STORAGE_OUT_EPNUM),
- .Attributes = EP_TYPE_BULK,
+ .EndpointAddress = MASS_STORAGE_OUT_EPADDR,
+ .Attributes = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = MASS_STORAGE_IO_EPSIZE,
- .PollingIntervalMS = 0x00
+ .PollingIntervalMS = 0x05
},
.HID_KeyboardInterface =
.TotalEndpoints = 1,
- .Class = 0x03,
- .SubClass = 0x01,
- .Protocol = HID_BOOTP_KeyboardBootProtocol,
+ .Class = HID_CSCP_HIDClass,
+ .SubClass = HID_CSCP_BootSubclass,
+ .Protocol = HID_CSCP_KeyboardBootProtocol,
.InterfaceStrIndex = NO_DESCRIPTOR
},
{
.Header = {.Size = sizeof(USB_Descriptor_Endpoint_t), .Type = DTYPE_Endpoint},
- .EndpointAddress = (ENDPOINT_DESCRIPTOR_DIR_IN | KEYBOARD_EPNUM),
- .Attributes = EP_TYPE_INTERRUPT,
+ .EndpointAddress = KEYBOARD_EPADDR,
+ .Attributes = (EP_TYPE_INTERRUPT | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
.EndpointSize = KEYBOARD_EPSIZE,
- .PollingIntervalMS = 0x04
+ .PollingIntervalMS = 0x05
},
};
* the string descriptor with index 0 (the first index). It is actually an array of 16-bit integers, which indicate
* via the language ID table available at USB.org what languages the device supports for its string descriptors.
*/
-USB_Descriptor_String_t PROGMEM LanguageString =
+const USB_Descriptor_String_t PROGMEM LanguageString =
{
.Header = {.Size = USB_STRING_LEN(1), .Type = DTYPE_String},
* form, and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
-USB_Descriptor_String_t PROGMEM ManufacturerString =
+const USB_Descriptor_String_t PROGMEM ManufacturerString =
{
.Header = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
* and is read out upon request by the host when the appropriate string ID is requested, listed in the Device
* Descriptor.
*/
-USB_Descriptor_String_t PROGMEM ProductString =
+const USB_Descriptor_String_t PROGMEM ProductString =
{
.Header = {.Size = USB_STRING_LEN(35), .Type = DTYPE_String},
projects / pub / USBasp.git / blobdiff