Update all demos, projects and bootloaders to indent all function parameters, one...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / ISP / ISPProtocol.c

diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
index e49f590..d6e02fa 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
@@ -76,7 +76,7 @@ void ISPProtocol_EnterISPMode(void)
 
        /* Continuously attempt to synchronize with the target until either the number of attempts specified
         * by the host has exceeded, or the the device sends back the expected response values */
-       while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED) && TimeoutMSRemaining)
+       while (Enter_ISP_Params.SynchLoops-- && (ResponseStatus == STATUS_CMD_FAILED) && TimeoutTicksRemaining)
        {
                uint8_t ResponseBytes[4];
 
@@ -186,22 +186,18 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
                                                                            Write_Memory_Params.PollValue2;
        uint8_t* NextWriteByte = Write_Memory_Params.ProgData;
 
-       /* Check to see if the host has issued a SET ADDRESS command and we haven't sent a
-        * LOAD EXTENDED ADDRESS command (if needed, used when operating beyond the 128KB
-        * FLASH barrier) */
-       if (MustSetAddress)
-       {
-               if (CurrentAddress & (1UL << 31))
-                 ISPTarget_LoadExtendedAddress();
-
-               MustSetAddress = false;
-       }
-
        /* Check the programming mode desired by the host, either Paged or Word memory writes */
        if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK)
        {
                uint16_t StartAddress = (CurrentAddress & 0xFFFF);
        
+               /* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
+               if (MustLoadExtendedAddress)
+               {
+                       ISPTarget_LoadExtendedAddress();
+                       MustLoadExtendedAddress = false;
+               }
+
                /* Paged mode memory programming */
                for (uint16_t CurrentByte = 0; CurrentByte < Write_Memory_Params.BytesToWrite; CurrentByte++)
                {
@@ -252,7 +248,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
 
                        /* Check to see if the FLASH address has crossed the extended address boundary */
                        if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
-                         ISPTarget_LoadExtendedAddress();                      
+                         MustLoadExtendedAddress = true;                       
                }
        }
        else
@@ -263,6 +259,13 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
                        bool    IsOddByte   = (CurrentByte & 0x01);
                        uint8_t ByteToWrite = *(NextWriteByte++);
                          
+                       /* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
+                       if (MustLoadExtendedAddress)
+                       {
+                               ISPTarget_LoadExtendedAddress();
+                               MustLoadExtendedAddress = false;
+                       }
+
                        SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
                        SPI_SendByte(CurrentAddress >> 8);
                        SPI_SendByte(CurrentAddress & 0xFF);
@@ -291,14 +294,12 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
                        /* EEPROM just increments the address each byte, flash needs to increment on each word and
                         * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
                         * address boundary has been crossed */
-                       if (V2Command == CMD_PROGRAM_EEPROM_ISP)
+                       if ((CurrentByte & 0x01) || (V2Command == CMD_PROGRAM_EEPROM_ISP))
                        {
                                CurrentAddress++;
-                       }
-                       else if (IsOddByte)
-                       {
-                               if (!(++CurrentAddress & 0xFFFF))
-                                 ISPTarget_LoadExtendedAddress();                      
+                       
+                               if ((V2Command != CMD_PROGRAM_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
+                                 MustLoadExtendedAddress = true;                       
                        }
                }
        }
@@ -330,21 +331,17 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
        
        Endpoint_Write_Byte(V2Command);
        Endpoint_Write_Byte(STATUS_CMD_OK);
-       
-       /* Check to see if the host has issued a SET ADDRESS command and we haven't sent a
-        * LOAD EXTENDED ADDRESS command (if needed, used when operating beyond the 128KB
-        * FLASH barrier) */
-       if (MustSetAddress)
-       {
-               if (CurrentAddress & (1UL << 31))
-                 ISPTarget_LoadExtendedAddress();
-
-               MustSetAddress = false;
-       }
 
        /* Read each byte from the device and write them to the packet for the host */
        for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++)
        {
+               /* Check to see if we need to send a LOAD EXTENDED ADDRESS command to the target */
+               if (MustLoadExtendedAddress)
+               {
+                       ISPTarget_LoadExtendedAddress();
+                       MustLoadExtendedAddress = false;
+               }
+
                /* Read the next byte from the desired memory space in the device */
                SPI_SendByte(Read_Memory_Params.ReadMemoryCommand);
                SPI_SendByte(CurrentAddress >> 8);
@@ -366,14 +363,12 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
                /* EEPROM just increments the address each byte, flash needs to increment on each word and
                 * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
                 * address boundary has been crossed */
-               if (V2Command == CMD_READ_EEPROM_ISP)
+               if ((CurrentByte & 0x01) || (V2Command == CMD_READ_EEPROM_ISP))
                {
                        CurrentAddress++;
-               }
-               else if (CurrentByte & 0x01)
-               {
-                       if (!(++CurrentAddress & 0xFFFF))
-                         ISPTarget_LoadExtendedAddress();                      
+               
+                       if ((V2Command != CMD_READ_EEPROM_ISP) && !(CurrentAddress & 0xFFFF))
+                         MustLoadExtendedAddress = true;                       
                }
        }
 
@@ -557,13 +552,8 @@ void ISPProtocol_SPIMulti(void)
  */
 void ISPProtocol_DelayMS(uint8_t DelayMS)
 {
-       while (DelayMS-- && TimeoutMSRemaining)
-       {
-               if (TimeoutMSRemaining)
-                 TimeoutMSRemaining--;
-                 
-               _delay_ms(1);
-       }
+       while (DelayMS-- && TimeoutTicksRemaining)
+         _delay_ms(1);
 }
 
 #endif
\ No newline at end of file