Fix AVRISP-MKII clone project's TPI Chip Erase command processing - ensure erase...

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / TINYNVM.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index c7e64a5..34ffb1e 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -66,7 +66,7 @@ static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
  */\r
 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)\r
 {\r
  */\r
 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)\r
 {\r

-       /* The TPI command for writing to the I/O space uses wierd addressing, where the I/O address's upper\r
+       /* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper\r

         * two bits of the 6-bit address are shifted left once */\r
        XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));\r
 }\r
         * two bits of the 6-bit address are shifted left once */\r
        XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));\r
 }\r


@@ -204,13 +204,13 @@ bool TINYNVM_EraseMemory(const uint8_t EraseCommand, const uint16_t Address)
        TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);\r
        XPROGTarget_SendByte(EraseCommand);\r
 \r
        TINYNVM_SendWriteNVMRegister(XPROG_Param_NVMCMDRegAddr);\r
        XPROGTarget_SendByte(EraseCommand);\r
 \r

-       /* Write to a location within the target address space to start the erase process */\r
-       TINYNVM_SendPointerAddress(Address);\r
+       /* Write to a high byte location within the target address space to start the erase process */\r
+       TINYNVM_SendPointerAddress(Address | 0x0001);\r

        XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);\r
        XPROGTarget_SendByte(0x00);\r
 \r
        XPROGTarget_SendByte(TPI_CMD_SST | TPI_POINTER_INDIRECT);\r
        XPROGTarget_SendByte(0x00);\r
 \r

-       /* Wait until the NVM bus is ready again */\r
-       if (!(TINYNVM_WaitWhileNVMBusBusy()))\r
+       /* Wait until the NVM controller is no longer busy */\r
+       if (!(TINYNVM_WaitWhileNVMControllerBusy()))\r

          return false;\r
        \r
        return true;\r
          return false;\r
        \r
        return true;\r