/*\r
LUFA Library\r
- Copyright (C) Dean Camera, 2009.\r
+ Copyright (C) Dean Camera, 2010.\r
\r
dean [at] fourwalledcubicle [dot] com\r
www.fourwalledcubicle.com\r
*/\r
\r
/*\r
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
-\r
- Permission to use, copy, modify, and distribute this software\r
- and its documentation for any purpose and without fee is hereby\r
- granted, provided that the above copyright notice appear in all\r
- copies and that both that the copyright notice and this\r
- permission notice and warranty disclaimer appear in supporting\r
- documentation, and that the name of the author not be used in\r
- advertising or publicity pertaining to distribution of the\r
+ Copyright 2010 Dean Camera (dean [at] fourwalledcubicle [dot] com)\r
+\r
+ Permission to use, copy, modify, distribute, and sell this \r
+ software and its documentation for any purpose is hereby granted\r
+ without fee, provided that the above copyright notice appear in \r
+ all copies and that both that the copyright notice and this\r
+ permission notice and warranty disclaimer appear in supporting \r
+ documentation, and that the name of the author not be used in \r
+ advertising or publicity pertaining to distribution of the \r
software without specific, written prior permission.\r
\r
The author disclaim all warranties with regard to this\r
.Config =\r
{\r
.DataINPipeNumber = 1,\r
+ .DataINPipeDoubleBank = false,\r
+ \r
.DataOUTPipeNumber = 2,\r
+ .DataOUTPipeDoubleBank = false,\r
\r
- .MatchInterfaceProtocol = true,\r
- .HIDInterfaceProtocol = 0x02,\r
+ .HIDInterfaceProtocol = HID_BOOT_MOUSE_PROTOCOL,\r
},\r
- \r
- .State =\r
- {\r
- // Leave all state values to their defaults \r
- }\r
};\r
\r
\r
/** Main program entry point. This routine configures the hardware required by the application, then\r
- * starts the scheduler to run the application tasks.\r
+ * enters a loop to run the application tasks in sequence.\r
*/\r
int main(void)\r
{\r
case HOST_STATE_Addressed:\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
\r
- if (HID_Host_ConfigurePipes(&Mouse_HID_Interface, 512) != HID_ENUMERROR_NoError)\r
+ uint16_t ConfigDescriptorSize;\r
+ uint8_t ConfigDescriptorData[512];\r
+\r
+ if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,\r
+ sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)\r
{\r
- printf("Attached device is not a valid Mouse.\r\n");\r
- \r
+ printf("Error Retrieving Configuration Descriptor.\r\n");\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
+ }\r
+\r
+ if (HID_Host_ConfigurePipes(&Mouse_HID_Interface,\r
+ ConfigDescriptorSize, ConfigDescriptorData) != HID_ENUMERROR_NoError)\r
+ {\r
+ printf("Attached Device Not a Valid Mouse.\r\n");\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)\r
{\r
printf("Error Setting Device Configuration.\r\n");\r
+ LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
+ USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
+ break;\r
+ }\r
\r
+ if (HID_Host_SetBootProtocol(&Mouse_HID_Interface) != 0)\r
+ {\r
+ printf("Could not Set Boot Protocol Mode.\r\n");\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
USB_HostState = HOST_STATE_WaitForDeviceRemoval;\r
break;\r
USB_HostState = HOST_STATE_Configured;\r
break;\r
case HOST_STATE_Configured:\r
+ if (HID_Host_IsReportReceived(&Mouse_HID_Interface))\r
+ {\r
+ uint8_t LEDMask = LEDS_NO_LEDS;\r
+ \r
+ USB_MouseReport_Data_t MouseReport;\r
+ HID_Host_ReceiveReport(&Mouse_HID_Interface, &MouseReport);\r
+ \r
+ printf_P(PSTR("dX:%2d dY:%2d Button:%d\r\n"), MouseReport.X,\r
+ MouseReport.Y,\r
+ MouseReport.Button);\r
+ if (MouseReport.X > 0)\r
+ LEDMask |= LEDS_LED1;\r
+ else if (MouseReport.X < 0)\r
+ LEDMask |= LEDS_LED2;\r
+ \r
+ if (MouseReport.Y > 0)\r
+ LEDMask |= LEDS_LED3;\r
+ else if (MouseReport.Y < 0)\r
+ LEDMask |= LEDS_LED4;\r
+\r
+ if (MouseReport.Button)\r
+ LEDMask = LEDS_ALL_LEDS;\r
+\r
+ LEDs_SetAllLEDs(LEDMask);\r
+ }\r
+ \r
break;\r
}\r
\r
/** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and\r
* starts the library USB task to begin the enumeration and USB management process.\r
*/\r
-void EVENT_USB_DeviceAttached(void)\r
+void EVENT_USB_Host_DeviceAttached(void)\r
{\r
puts_P(PSTR("Device Attached.\r\n"));\r
LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);\r
/** Event handler for the USB_DeviceUnattached event. This indicates that a device has been removed from the host, and\r
* stops the library USB task management process.\r
*/\r
-void EVENT_USB_DeviceUnattached(void)\r
+void EVENT_USB_Host_DeviceUnattached(void)\r
{\r
puts_P(PSTR("\r\nDevice Unattached.\r\n"));\r
LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);\r
/** Event handler for the USB_DeviceEnumerationComplete event. This indicates that a device has been successfully\r
* enumerated by the host and is now ready to be used by the application.\r
*/\r
-void EVENT_USB_DeviceEnumerationComplete(void)\r
+void EVENT_USB_Host_DeviceEnumerationComplete(void)\r
{\r
LEDs_SetAllLEDs(LEDMASK_USB_READY);\r
}\r
\r
/** Event handler for the USB_HostError event. This indicates that a hardware error occurred while in host mode. */\r
-void EVENT_USB_HostError(const uint8_t ErrorCode)\r
+void EVENT_USB_Host_HostError(const uint8_t ErrorCode)\r
{\r
USB_ShutDown();\r
\r
- puts_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
+ printf_P(PSTR(ESC_FG_RED "Host Mode Error\r\n"\r
+ " -- Error Code %d\r\n" ESC_FG_WHITE), ErrorCode);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
for(;;);\r
/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while\r
* enumerating an attached USB device.\r
*/\r
-void EVENT_USB_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
+void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode, const uint8_t SubErrorCode)\r
{\r
- puts_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"));\r
- printf_P(PSTR(" -- Error Code %d\r\n"), ErrorCode);\r
- printf_P(PSTR(" -- Sub Error Code %d\r\n"), SubErrorCode);\r
- printf_P(PSTR(" -- In State %d\r\n" ESC_FG_WHITE), USB_HostState);\r
+ printf_P(PSTR(ESC_FG_RED "Dev Enum Error\r\n"\r
+ " -- Error Code %d\r\n"\r
+ " -- Sub Error Code %d\r\n"\r
+ " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);\r
\r
LEDs_SetAllLEDs(LEDMASK_USB_ERROR);\r
}\r
projects / pub / USBasp.git / blobdiff