Added standard stream example to the ClassDriver CDC device demo.

[pub/USBasp.git] / LUFA / Drivers / USB / HighLevel / Events.h

diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h
index 7f369bc..4042d46 100644 (file)
--- a/LUFA/Drivers/USB/HighLevel/Events.h
+++ b/LUFA/Drivers/USB/HighLevel/Events.h
@@ -98,7 +98,7 @@
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state\r
                         *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by\r
                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection\r
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state\r
                         *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by\r
                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection\r

-                        *        and disconnection events may be manually fired, and the \ref USB_IsConnected global changed manually.\r
+                        *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.\r

                         *\r
                         *  \see USBTask.h for more information on the USB management task and reducing CPU usage.\r
                         */\r
                         *\r
                         *  \see USBTask.h for more information on the USB management task and reducing CPU usage.\r
                         */\r


@@ -116,7 +116,7 @@
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state\r
                         *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by\r
                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection\r
                         *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state\r
                         *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by\r
                         *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection\r

-                        *        and disconnection events may be manually fired, and the \ref USB_IsConnected global changed manually.\r
+                        *        and disconnection events may be manually fired, and the \ref USB_DeviceState global changed manually.\r

                         *\r
                         *  \see USBTask.h for more information on the USB management task and reducing CPU usage.\r
                         */\r
                         *\r
                         *  \see USBTask.h for more information on the USB management task and reducing CPU usage.\r
                         */\r


@@ -127,7 +127,7 @@
                         *\r
                         *  \note This event only exists on USB AVR models which support dual role modes.\r
                         *\r
                         *\r
                         *  \note This event only exists on USB AVR models which support dual role modes.\r
                         *\r

-                        *  \param ErrorCode  Error code indicating the failure reason, a value in \ref USB_InitErrorCodes_t\r
+                        *  \param[in] ErrorCode  Error code indicating the failure reason, a value in \ref USB_InitErrorCodes_t\r

                         */\r
                        void EVENT_USB_InitFailure(const uint8_t ErrorCode);\r
 \r
                         */\r
                        void EVENT_USB_InitFailure(const uint8_t ErrorCode);\r
 \r


@@ -146,7 +146,7 @@
                        /** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB\r
                         *  interface is in host mode.\r
                         *\r
                        /** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB\r
                         *  interface is in host mode.\r
                         *\r

-                        *  \param ErrorCode  Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t\r
+                        *  \param[in] ErrorCode  Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t\r

                         *\r
                         *  \note This event only exists on USB AVR models which supports host mode.\r
                         *\r
                         *\r
                         *  \note This event only exists on USB AVR models which supports host mode.\r
                         *\r


@@ -185,12 +185,12 @@
                        /** Event for USB device enumeration failure. This event fires when a the USB interface is\r
                         *  in host mode, and an attached USB device has failed to enumerate completely.\r
                         *\r
                        /** Event for USB device enumeration failure. This event fires when a the USB interface is\r
                         *  in host mode, and an attached USB device has failed to enumerate completely.\r
                         *\r

-                        *  \param ErrorCode  Error code indicating the failure reason, a value in \r
-                        *                    \ref USB_Host_EnumerationErrorCodes_t\r
+                        *  \param[in] ErrorCode  Error code indicating the failure reason, a value in \r
+                        *                        \ref USB_Host_EnumerationErrorCodes_t\r

                         *\r
                         *\r

-                        *  \param SubErrorCode  Sub error code indicating the reason for failure - for example, if the\r
-                        *                       ErrorCode parameter indicates a control error, this will give the error\r
-                        *                       code returned by the \ref USB_Host_SendControlRequest() function.\r
+                        *  \param[in] SubErrorCode  Sub error code indicating the reason for failure - for example, if the\r
+                        *                           ErrorCode parameter indicates a control error, this will give the error\r
+                        *                           code returned by the \ref USB_Host_SendControlRequest() function.\r

                         *\r
                         *  \note This event only exists on USB AVR models which supports host mode.\r
                         *\r
                         *\r
                         *  \note This event only exists on USB AVR models which supports host mode.\r
                         *\r