* dispatch header located in LUFA/Drivers/USB/USB.h.
*/
-/** \ingroup Group_USB
- * @defgroup Group_EndpointManagement Endpoint Management
- *
- * Functions, macros and enums related to endpoint management when in USB Device mode. This
- * module contains the endpoint management macros, as well as endpoint interrupt and data
- * send/receive functions for various data types.
- *
- * @{
- */
-
-/** @defgroup Group_EndpointRW Endpoint Data Reading and Writing
+/** \ingroup Group_EndpointManagement
+ * @defgroup Group_EndpointRW Endpoint Data Reading and Writing
*
* Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
*/
-/** \ingroup Group_EndpointRW
+/** \ingroup Group_EndpointRW
* @defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types
*
* Functions, macros, variables, enums and types related to data reading and writing of primitive data types
* from and to endpoints.
*/
-/** \ingroup Group_EndpointRW
- * @defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
+/** \ingroup Group_EndpointManagement
+ * @defgroup Group_EndpointPacketManagement Endpoint Packet Management
*
- * Functions, macros, variables, enums and types related to data reading and writing of data streams from
- * and to endpoints.
- */
+ * Functions, macros, variables, enums and types related to packet management of endpoints.
+ */
-/** @defgroup Group_EndpointPacketManagement Endpoint Packet Management
+/** \ingroup Group_USB
+ * @defgroup Group_EndpointManagement Endpoint Management
*
- * Functions, macros, variables, enums and types related to packet management of endpoints.
+ * Functions, macros and enums related to endpoint management when in USB Device mode. This
+ * module contains the endpoint management macros, as well as endpoint interrupt and data
+ * send/receive functions for various data types.
+ *
+ * @{
*/
#ifndef __ENDPOINT_H__
/* Includes: */
#include <avr/io.h>
- #include <avr/pgmspace.h>
- #include <avr/eeprom.h>
#include <stdbool.h>
#include "../../../Common/Common.h"
#include "../HighLevel/USBTask.h"
#include "USBInterrupt.h"
-
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- #include "../HighLevel/StreamCallbacks.h"
- #endif
/* Enable C linkage for C++ Compilers: */
#if defined(__cplusplus)
#error Do not include this file directly. Include LUFA/Drivers/USB/USB.h instead.
#endif
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- #define __CALLBACK_PARAM , StreamCallbackPtr_t Callback
- #else
- #define __CALLBACK_PARAM
- #endif
-
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
* \ref USB_STREAM_TIMEOUT_MS macro.
*/
};
-
- /** Enum for the possible error return codes of the Endpoint_*_Stream_* functions.
- *
- * \ingroup Group_EndpointStreamRW
- */
- enum Endpoint_Stream_RW_ErrorCodes_t
- {
- ENDPOINT_RWSTREAM_NoError = 0, /**< Command completed successfully, no error. */
- ENDPOINT_RWSTREAM_EndpointStalled = 1, /**< The endpoint was stalled during the stream
- * transfer by the host or device.
- */
- ENDPOINT_RWSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
- * the transfer.
- */
- ENDPOINT_RWSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- ENDPOINT_RWSTREAM_Timeout = 4, /**< The host failed to accept or send the next packet
- * within the software timeout period set by the
- * \ref USB_STREAM_TIMEOUT_MS macro.
- */
- ENDPOINT_RWSTREAM_CallbackAborted = 5, /**< Indicates that the stream's callback function
- * aborted the transfer early.
- */
- };
-
- /** Enum for the possible error return codes of the Endpoint_*_Control_Stream_* functions..
- *
- * \ingroup Group_EndpointStreamRW
- */
- enum Endpoint_ControlStream_RW_ErrorCodes_t
- {
- ENDPOINT_RWCSTREAM_NoError = 0, /**< Command completed successfully, no error. */
- ENDPOINT_RWCSTREAM_HostAborted = 1, /**< The aborted the transfer prematurely. */
- ENDPOINT_RWCSTREAM_DeviceDisconnected = 2, /**< Device was disconnected from the host during
- * the transfer.
- */
- ENDPOINT_RWCSTREAM_BusSuspended = 3, /**< The USB bus has been suspended by the host and
- * no USB endpoint traffic can occur until the bus
- * has resumed.
- */
- };
/* Inline Functions: */
/** Configures the specified endpoint number with the given endpoint type, direction, bank size
#endif
/* Function Prototypes: */
- /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data
- * to be read or written to it.
- *
- * \note This routine should not be called on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointRW
- *
- * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
- */
- uint8_t Endpoint_WaitUntilReady(void);
-
/** Completes the status stage of a control transfer on a CONTROL type endpoint automatically,
* with respect to the data direction. This is a convenience function which can be used to
* simplify user control request handling.
*/
void Endpoint_ClearStatusStage(void);
- /** Reads and discards the given number of bytes from the endpoint from the given buffer,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
- * each USB packet, the given stream callback function is executed repeatedly until the next
- * packet is ready, allowing for early aborts of stream transfers.
- *
- * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
- * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
- * disabled and this function has the Callback parameter omitted.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Discard_Stream(uint16_t Length
- __CALLBACK_PARAM);
-
- /** Writes the given number of bytes to the endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
- * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
- * aborts of stream transfers.
- *
- * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
- * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
- * disabled and this function has the Callback parameter omitted.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_LE(const void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_LE(const void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_LE(const void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The last packet filled is not automatically sent;
- * the user is responsible for manually sending the last written packet to the host via the
- * \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function
- * is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early
- * aborts of stream transfers.
- *
- * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
- * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
- * disabled and this function has the Callback parameter omitted.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Stream_BE(const void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_EStream_BE(const void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_PStream_BE(const void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
- * each USB packet, the given stream callback function is executed repeatedly until the endpoint
- * is ready to accept the next packet, allowing for early aborts of stream transfers.
- *
- * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
- * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
- * disabled and this function has the Callback parameter omitted.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_LE(void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_LE(void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The last packet is not automatically
- * discarded once the remaining bytes has been read; the user is responsible for manually
- * discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between
- * each USB packet, the given stream callback function is executed repeatedly until the endpoint
- * is ready to accept the next packet, allowing for early aborts of stream transfers.
- *
- * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
- * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
- * disabled and this function has the Callback parameter omitted.
- *
- * \note This routine should not be used on CONTROL type endpoints.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Stream_BE(void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback.
- *
- * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_EStream_BE(void* Buffer,
- uint16_t Length
- __CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_LE(const void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_LE(const void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
- * sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
- * in both failure and success states; the user is responsible for manually clearing the setup OUT to
- * finalize the transfer via the \ref Endpoint_ClearOUT() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_EStream_BE(const void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE().
- *
- * \pre The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[in] Buffer Pointer to the source data buffer to read from.
- * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Write_Control_PStream_BE(const void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_EStream_LE(void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
- * discarding fully read packets from the host as needed. The device IN acknowledgement is not
- * automatically sent after success or failure states; the user is responsible for manually sending the
- * setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
- *
- * \ingroup Group_EndpointStreamRW
- *
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
- *
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
- */
- uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
-
- /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE().
- *
- * \note This function automatically clears the control transfer's status stage. Do not manually attempt
- * to clear the status stage when using this routine in a control transaction.
- * \n\n
- *
- * \note This routine should only be used on CONTROL type endpoints.
- *
- * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
- * together; i.e. the entire stream data must be read or written at the one time.
+ /** Spin-loops until the currently selected non-control endpoint is ready for the next packet of data
+ * to be read or written to it.
*
- * \ingroup Group_EndpointStreamRW
+ * \note This routine should not be called on CONTROL type endpoints.
*
- * \param[out] Buffer Pointer to the destination data buffer to write to.
- * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \ingroup Group_EndpointRW
*
- * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ * \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Read_Control_EStream_BE(void* Buffer,
- uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_WaitUntilReady(void);
/* Disable C linkage for C++ Compilers: */
#if defined(__cplusplus)
projects / pub / USBasp.git / blobdiff