The incomplete StandaloneProgrammer project now uses Host and Device Mass storage...

[pub/USBasp.git] / Projects / AVRISP / Lib / V2Protocol.c

diff --git a/Projects/AVRISP/Lib/V2Protocol.c b/Projects/AVRISP/Lib/V2Protocol.c
index 3aa2d89..d03bd89 100644 (file)
--- a/Projects/AVRISP/Lib/V2Protocol.c
+++ b/Projects/AVRISP/Lib/V2Protocol.c
@@ -36,12 +36,12 @@
 #define  INCLUDE_FROM_V2PROTOCOL_C\r
 #include "V2Protocol.h"\r
 \r
 #define  INCLUDE_FROM_V2PROTOCOL_C\r
 #include "V2Protocol.h"\r
 \r

-/** Master V2 Protocol packet handler, for receieved V2 Protocol packets from a connected host.\r
+/** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host.\r

  *  This routine decodes the issued command and passes off the handling of the command to the\r
  *  appropriate function.\r
  */\r
  *  This routine decodes the issued command and passes off the handling of the command to the\r
  *  appropriate function.\r
  */\r

-void V2Protocol_ProcessCommand(void)
-{
+void V2Protocol_ProcessCommand(void)\r
+{\r

        uint8_t V2Command = Endpoint_Read_Byte();\r
                  \r
        switch (V2Command)\r
        uint8_t V2Command = Endpoint_Read_Byte();\r
                  \r
        switch (V2Command)\r


@@ -95,17 +95,17 @@ void V2Protocol_ProcessCommand(void)
        }\r
        \r
        Endpoint_WaitUntilReady();\r
        }\r
        \r
        Endpoint_WaitUntilReady();\r

-       Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
-}
+       Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);\r
+}\r

 \r
 /** Handler for unknown V2 protocol commands. This discards all sent data and returns a\r
  *  STATUS_CMD_UNKNOWN status back to the host.\r
  *\r
 \r
 /** Handler for unknown V2 protocol commands. This discards all sent data and returns a\r
  *  STATUS_CMD_UNKNOWN status back to the host.\r
  *\r

- *  \param V2Command  Issued V2 Protocol command byte from the host\r
+ *  \param[in] V2Command  Issued V2 Protocol command byte from the host\r

  */\r
 static void V2Protocol_Command_Unknown(uint8_t V2Command)\r
 {\r
  */\r
 static void V2Protocol_Command_Unknown(uint8_t V2Command)\r
 {\r

-       /* Discard all incomming data */\r
+       /* Discard all incoming data */\r

        while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)\r
        {\r
                Endpoint_ClearOUT();\r
        while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)\r
        {\r
                Endpoint_ClearOUT();\r


@@ -120,7 +120,7 @@ static void V2Protocol_Command_Unknown(uint8_t V2Command)
        Endpoint_ClearIN();\r
 }\r
 \r
        Endpoint_ClearIN();\r
 }\r
 \r

-/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */
+/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */\r

 static void V2Protocol_Command_SignOn(void)\r
 {\r
        Endpoint_ClearOUT();\r
 static void V2Protocol_Command_SignOn(void)\r
 {\r
        Endpoint_ClearOUT();\r


@@ -136,7 +136,7 @@ static void V2Protocol_Command_SignOn(void)
 /** Handler for the CMD_SET_PARAMETER and CMD_GET_PARAMETER commands from the host, setting or\r
  *  getting a device parameter's value from the parameter table.\r
  *\r
 /** Handler for the CMD_SET_PARAMETER and CMD_GET_PARAMETER commands from the host, setting or\r
  *  getting a device parameter's value from the parameter table.\r
  *\r

- *  \param V2Command  Issued V2 Protocol command byte from the host\r
+ *  \param[in] V2Command  Issued V2 Protocol command byte from the host\r

  */\r
 static void V2Protocol_Command_GetSetParam(uint8_t V2Command)\r
 {\r
  */\r
 static void V2Protocol_Command_GetSetParam(uint8_t V2Command)\r
 {\r


@@ -151,7 +151,7 @@ static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
        \r
        Endpoint_Write_Byte(V2Command);\r
        \r
        \r
        Endpoint_Write_Byte(V2Command);\r
        \r

-       uint8_t ParamPrivs = V2Params_GetParameterPrivellages(ParamID);\r
+       uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);\r

        \r
        if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))\r
        {\r
        \r
        if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))\r
        {\r


@@ -289,7 +289,7 @@ static void V2Protocol_Command_LeaveISPMode(void)
 /** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes,\r
  *  words or pages of data to the attached device.\r
  *\r
 /** Handler for the CMD_PROGRAM_FLASH_ISP and CMD_PROGRAM_EEPROM_ISP commands, writing out bytes,\r
  *  words or pages of data to the attached device.\r
  *\r

- *  \param V2Command  Issued V2 Protocol command byte from the host\r
+ *  \param[in] V2Command  Issued V2 Protocol command byte from the host\r

  */\r
 static void V2Protocol_Command_ProgramMemory(uint8_t V2Command)\r
 {\r
  */\r
 static void V2Protocol_Command_ProgramMemory(uint8_t V2Command)\r
 {\r


@@ -301,11 +301,9 @@ static void V2Protocol_Command_ProgramMemory(uint8_t V2Command)
                uint8_t  ProgrammingCommands[3];\r
                uint8_t  PollValue1;\r
                uint8_t  PollValue2;\r
                uint8_t  ProgrammingCommands[3];\r
                uint8_t  PollValue1;\r
                uint8_t  PollValue2;\r

-               uint8_t  ProgData[256];\r
-       } Write_Memory_Params;\r
+               uint8_t  ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the\r
+       } Write_Memory_Params;      // whole page and ACK the packet as fast as possible to prevent it from aborting\r

        \r
        \r

-       uint8_t* NextWriteByte = Write_Memory_Params.ProgData;\r
-\r

        Endpoint_Read_Stream_LE(&Write_Memory_Params, sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData));\r
        Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);\r
        \r
        Endpoint_Read_Stream_LE(&Write_Memory_Params, sizeof(Write_Memory_Params) - sizeof(Write_Memory_Params.ProgData));\r
        Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);\r
        \r


@@ -329,6 +327,8 @@ static void V2Protocol_Command_ProgramMemory(uint8_t V2Command)
        uint16_t PollAddress       = 0;\r
        uint8_t  PollValue         = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 :\r
                                                                            Write_Memory_Params.PollValue2;\r
        uint16_t PollAddress       = 0;\r
        uint8_t  PollValue         = (V2Command == CMD_PROGRAM_FLASH_ISP) ? Write_Memory_Params.PollValue1 :\r
                                                                            Write_Memory_Params.PollValue2;\r

+       uint8_t* NextWriteByte = Write_Memory_Params.ProgData;\r
+\r

        if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK)\r
        {\r
                uint16_t StartAddress = (CurrentAddress & 0xFFFF);\r
        if (Write_Memory_Params.ProgrammingMode & PROG_MODE_PAGED_WRITES_MASK)\r
        {\r
                uint16_t StartAddress = (CurrentAddress & 0xFFFF);\r


@@ -425,7 +425,7 @@ static void V2Protocol_Command_ProgramMemory(uint8_t V2Command)
 /** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes,\r
  *  words or pages of data from the attached device.\r
  *\r
 /** Handler for the CMD_READ_FLASH_ISP and CMD_READ_EEPROM_ISP commands, reading in bytes,\r
  *  words or pages of data from the attached device.\r
  *\r

- *  \param V2Command  Issued V2 Protocol command byte from the host\r
+ *  \param[in] V2Command  Issued V2 Protocol command byte from the host\r

  */\r
 static void V2Protocol_Command_ReadMemory(uint8_t V2Command)\r
 {\r
  */\r
 static void V2Protocol_Command_ReadMemory(uint8_t V2Command)\r
 {\r


@@ -516,7 +516,7 @@ static void V2Protocol_Command_ChipErase(void)
 /** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands,\r
  *  reading the requested configuration byte from the device.\r
  *\r
 /** Handler for the CMD_READ_FUSE_ISP, CMD_READ_LOCK_ISP, CMD_READ_SIGNATURE_ISP and CMD_READ_OSCCAL commands,\r
  *  reading the requested configuration byte from the device.\r
  *\r

- *  \param V2Command  Issued V2 Protocol command byte from the host\r
+ *  \param[in] V2Command  Issued V2 Protocol command byte from the host\r

  */\r
 static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command)\r
 {\r
  */\r
 static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command)\r
 {\r


@@ -546,7 +546,7 @@ static void V2Protocol_Command_ReadFuseLockSigOSCCAL(uint8_t V2Command)
 /** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration\r
  *  byte to the device.\r
  *\r
 /** Handler for the CMD_WRITE_FUSE_ISP and CMD_WRITE_LOCK_ISP commands, writing the requested configuration\r
  *  byte to the device.\r
  *\r

- *  \param V2Command  Issued V2 Protocol command byte from the host\r
+ *  \param[in] V2Command  Issued V2 Protocol command byte from the host\r

  */\r
 static void V2Protocol_Command_WriteFuseLock(uint8_t V2Command)\r
 {\r
  */\r
 static void V2Protocol_Command_WriteFuseLock(uint8_t V2Command)\r
 {\r