Fix AVRISP-MKII Clone Programmer PDI entry sequence (thanks to Justin Mattair).

[pub/USBasp.git] / Projects / AVRISP-MKII / Lib / XPROG / XPROGTarget.c

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 0455329..283d8f4 100644 (file)
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -39,7 +39,7 @@
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
 
 /** Flag to indicate if the USART is currently in Tx or Rx mode. */
 #if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
 
 /** Flag to indicate if the USART is currently in Tx or Rx mode. */

-bool IsSending;
+static bool IsSending;

 
 /** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
 void XPROGTarget_EnableTargetPDI(void)
 
 /** Enables the target's PDI interface, holding the target in reset until PDI mode is exited. */
 void XPROGTarget_EnableTargetPDI(void)


@@ -50,10 +50,15 @@ void XPROGTarget_EnableTargetPDI(void)
        DDRD |=  (1 << 5) | (1 << 3);
        DDRD &= ~(1 << 2);
 
        DDRD |=  (1 << 5) | (1 << 3);
        DDRD &= ~(1 << 2);
 

-       /* Set DATA line high for at least 90ns to disable /RESET functionality */
-       PORTD |= (1 << 3);
+       /* Set Tx (PDI CLOCK) high, DATA line low for at least 90ns to disable /RESET functionality */
+       PORTD |=  (1 << 5);
+       PORTD &= ~(1 << 3);

        _delay_us(100);
 
        _delay_us(100);
 

+       /* Set DATA line high (enables PDI interface after 16 PDI CLK cycles) */
+       PORTD |= (1 << 3);
+       _delay_us(20);
+

        /* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
        UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
        UCSR1B = (1 << TXEN1);
        /* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
        UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
        UCSR1B = (1 << TXEN1);