Add new tag for the LUFA-120219-BETA release.

[pub/USBasp.git] / Demos / Host / ClassDriver / PrinterHost / PrinterHost.c

diff --git a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c
index 3fb2b29..3df0eed 100644 (file)
--- a/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c
+++ b/Demos/Host/ClassDriver/PrinterHost/PrinterHost.c
@@ -1,13 +1,13 @@
 /*
              LUFA Library
 /*
              LUFA Library

-     Copyright (C) Dean Camera, 2011.
+     Copyright (C) Dean Camera, 2012.

 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*
 
   dean [at] fourwalledcubicle [dot] com
            www.lufa-lib.org
 */
 
 /*

-  Copyright 2011  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)

 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
 
   Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted


@@ -52,6 +52,7 @@ USB_ClassInfo_PRNT_Host_t Printer_PRNT_Interface =
                        },
        };
 
                        },
        };
 

+

 /** Main program entry point. This routine configures the hardware required by the application, then
  *  enters a loop to run the application tasks in sequence.
  */
 /** Main program entry point. This routine configures the hardware required by the application, then
  *  enters a loop to run the application tasks in sequence.
  */


@@ -66,88 +67,7 @@ int main(void)
 
        for (;;)
        {
 
        for (;;)
        {

-               switch (USB_HostState)
-               {
-                       case HOST_STATE_Addressed:
-                               LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-
-                               uint16_t ConfigDescriptorSize;
-                               uint8_t  ConfigDescriptorData[512];
-
-                               if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
-                                                                      sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
-                               {
-                                       puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
-                                       LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-                                       USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-                                       break;
-                               }
-
-                               if (PRNT_Host_ConfigurePipes(&Printer_PRNT_Interface,
-                                                            ConfigDescriptorSize, ConfigDescriptorData) != PRNT_ENUMERROR_NoError)
-                               {
-                                       puts_P(PSTR("Attached Device Not a Valid Printer Class Device.\r\n"));
-                                       LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-                                       USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-                                       break;
-                               }
-
-                               if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
-                               {
-                                       puts_P(PSTR("Error Setting Device Configuration.\r\n"));
-                                       LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-                                       USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-                                       break;
-                               }
-
-                               if (PRNT_Host_SetBidirectionalMode(&Printer_PRNT_Interface) != HOST_SENDCONTROL_Successful)
-                               {
-                                       puts_P(PSTR("Error Setting Bidirectional Mode.\r\n"));
-                                       LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-                                       USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-                                       break;
-                               }
-
-                               puts_P(PSTR("Printer Device Enumerated.\r\n"));
-                               LEDs_SetAllLEDs(LEDMASK_USB_READY);
-                               USB_HostState = HOST_STATE_Configured;
-                               break;
-                       case HOST_STATE_Configured:
-                               LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
-
-                               puts_P(PSTR("Retrieving Device ID...\r\n"));
-
-                               char DeviceIDString[300];
-                               if (PRNT_Host_GetDeviceID(&Printer_PRNT_Interface, DeviceIDString,
-                                                         sizeof(DeviceIDString)) != HOST_SENDCONTROL_Successful)
-                               {
-                                       puts_P(PSTR("Error Getting Device ID.\r\n"));
-                                       LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-                                       USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-                                       break;
-                               }
-
-                               printf_P(PSTR("Device ID: %s.\r\n"), DeviceIDString);
-
-                               char     TestPageData[] = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X";
-                               uint16_t TestPageLength = strlen(TestPageData);
-
-                               printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength);
-
-                               if (PRNT_Host_SendData(&Printer_PRNT_Interface, &TestPageData, TestPageLength) != PIPE_RWSTREAM_NoError)
-                               {
-                                       puts_P(PSTR("Error Sending Page Data.\r\n"));
-                                       LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-                                       USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-                                       break;
-                               }
-
-                               puts_P(PSTR("Test Page Sent.\r\n"));
-
-                               LEDs_SetAllLEDs(LEDMASK_USB_READY);
-                               USB_HostState = HOST_STATE_WaitForDeviceRemoval;
-                               break;
-               }
+               PrinterHost_Task();

 
                PRNT_Host_USBTask(&Printer_PRNT_Interface);
                USB_USBTask();
 
                PRNT_Host_USBTask(&Printer_PRNT_Interface);
                USB_USBTask();


@@ -173,6 +93,49 @@ void SetupHardware(void)
        Serial_CreateStream(NULL);
 }
 
        Serial_CreateStream(NULL);
 }
 

+/** Task to manage an enumerated USB printer once connected, to display device
+ *  information and print a test PCL page.
+ */
+void PrinterHost_Task(void)
+{
+       if (USB_HostState != HOST_STATE_Configured)
+         return;
+
+       LEDs_SetAllLEDs(LEDMASK_USB_BUSY);
+
+       puts_P(PSTR("Retrieving Device ID...\r\n"));
+
+       char DeviceIDString[300];
+       if (PRNT_Host_GetDeviceID(&Printer_PRNT_Interface, DeviceIDString,
+                                 sizeof(DeviceIDString)) != HOST_SENDCONTROL_Successful)
+       {
+               puts_P(PSTR("Error Getting Device ID.\r\n"));
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+               USB_Host_SetDeviceConfiguration(0);
+               return;
+       }
+
+       printf_P(PSTR("Device ID: %s.\r\n"), DeviceIDString);
+
+       char     TestPageData[] = "\033%-12345X\033E" "LUFA PCL Test Page" "\033E\033%-12345X";
+       uint16_t TestPageLength = strlen(TestPageData);
+
+       printf_P(PSTR("Sending Test Page (%d bytes)...\r\n"), TestPageLength);
+
+       if (PRNT_Host_SendData(&Printer_PRNT_Interface, &TestPageData, TestPageLength) != PIPE_RWSTREAM_NoError)
+       {
+               puts_P(PSTR("Error Sending Page Data.\r\n"));
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+               USB_Host_SetDeviceConfiguration(0);
+               return;
+       }
+
+       puts_P(PSTR("Test Page Sent.\r\n"));
+
+       LEDs_SetAllLEDs(LEDMASK_USB_READY);
+       USB_Host_SetDeviceConfiguration(0);
+}
+

 /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
  *  starts the library USB task to begin the enumeration and USB management process.
  */
 /** Event handler for the USB_DeviceAttached event. This indicates that a device has been attached to the host, and
  *  starts the library USB task to begin the enumeration and USB management process.
  */


@@ -196,6 +159,43 @@ void EVENT_USB_Host_DeviceUnattached(void)
  */
 void EVENT_USB_Host_DeviceEnumerationComplete(void)
 {
  */
 void EVENT_USB_Host_DeviceEnumerationComplete(void)
 {

+       LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
+
+       uint16_t ConfigDescriptorSize;
+       uint8_t  ConfigDescriptorData[512];
+
+       if (USB_Host_GetDeviceConfigDescriptor(1, &ConfigDescriptorSize, ConfigDescriptorData,
+                                              sizeof(ConfigDescriptorData)) != HOST_GETCONFIG_Successful)
+       {
+               puts_P(PSTR("Error Retrieving Configuration Descriptor.\r\n"));
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+               return;
+       }
+
+       if (PRNT_Host_ConfigurePipes(&Printer_PRNT_Interface,
+                                    ConfigDescriptorSize, ConfigDescriptorData) != PRNT_ENUMERROR_NoError)
+       {
+               puts_P(PSTR("Attached Device Not a Valid Printer Class Device.\r\n"));
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+               return;
+       }
+
+       if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
+       {
+               puts_P(PSTR("Error Setting Device Configuration.\r\n"));
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+               return;
+       }
+
+       if (PRNT_Host_SetBidirectionalMode(&Printer_PRNT_Interface) != HOST_SENDCONTROL_Successful)
+       {
+               puts_P(PSTR("Error Setting Bidirectional Mode.\r\n"));
+               LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
+               USB_Host_SetDeviceConfiguration(0);
+               return;
+       }
+
+       puts_P(PSTR("Printer Device Enumerated.\r\n"));

        LEDs_SetAllLEDs(LEDMASK_USB_READY);
 }
 
        LEDs_SetAllLEDs(LEDMASK_USB_READY);
 }