# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
-# processor frequency. You can then use this symbol in your source code to
+# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
-# Typical values are:
-# F_CPU = 1000000
-# F_CPU = 1843200
-# F_CPU = 2000000
-# F_CPU = 3686400
-# F_CPU = 4000000
-# F_CPU = 7372800
-# F_CPU = 8000000
-# F_CPU = 11059200
-# F_CPU = 14745600
-# F_CPU = 16000000
-# F_CPU = 18432000
-# F_CPU = 20000000
+#
+# This will be an integer division of F_CLOCK below, as it is sourced by
+# F_CLOCK after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
F_CPU = 8000000
# Input clock frequency.
# This will define a symbol, F_CLOCK, in all source code files equal to the
-# input clock frequency (before any prescaling is performed). This value may
+# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
LUFA_PATH = ../../../..
-# LUFA library compile-time options
+# LUFA library compile-time options and predefined tokens
LUFA_OPTS = -D USB_DEVICE_ONLY
LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
# List C source files here. (C dependencies are automatically generated.)
SRC = $(TARGET).c \
Descriptors.c \
- Lib/SCSI.c \
Lib/DataflashManager.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/MassStorage.c \
- $(LUFA_PATH)/LUFA/Drivers/USB/Class/Device/HID.c \
-
-
+ Lib/SCSI.c \
+ $(LUFA_SRC_USB) \
+ $(LUFA_SRC_USBCLASS)
# List C++ source files here. (C dependencies are automatically generated.)
# Place -D or -U options here for C sources
-CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
+CDEFS = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CDEFS += -DBOARD=BOARD_$(BOARD)
+CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
-
+ADEFS = -DF_CPU=$(F_CPU)
+ADEFS += -DF_CLOCK=$(F_CLOCK)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
#CPPDEFS += -D__STDC_CONSTANT_MACROS
CFLAGS += -fno-strict-aliasing
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wundef
+#CFLAGS += -mshort-calls
#CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
#CFLAGS += -Wunreachable-code
#CFLAGS += -Wsign-compare
CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
CPPFLAGS += -fshort-enums
CPPFLAGS += -fno-exceptions
CPPFLAGS += -Wall
-CFLAGS += -Wundef
+CPPFLAGS += -Wundef
#CPPFLAGS += -mshort-calls
#CPPFLAGS += -fno-unit-at-a-time
#CPPFLAGS += -Wstrict-prototypes
# -Wl,...: tell GCC to pass this to linker.
# -Map: create map file
# --cref: add cross reference to map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
+LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax
LDFLAGS += -Wl,--gc-sections
LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
#---------------- Programming Options (avrdude) ----------------
-# Programming hardware: alf avr910 avrisp bascom bsd
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
+# Programming hardware
# Type: avrdude -c ?
# to get a full listing.
#
COPY = cp
WINSHELL = cmd
+
# Define Messages
# English
MSG_ERRORS_NONE = Errors: none
# Default target.
-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end
+all: begin gccversion sizebefore build sizeafter end
# Change the build target to build a HEX file or a library.
build: elf hex eep lss sym
# Display size of file.
HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
sizebefore:
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
2>/dev/null; echo; fi
-showeventhooks: build
- @echo
- @echo -------- Unhooked LUFA Events --------
- @$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \
- cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \
- echo "(None)"
- @echo --------------------------------------
-showliboptions:
- @echo
- @echo ---- Compile Time Library Options ----
- @for i in $(LUFA_OPTS:-D%=%); do \
- echo $$i; \
- done
- @echo --------------------------------------
-showtarget:
- @echo
- @echo --------- Target Information ---------
- @echo AVR Model: $(MCU)
- @echo Board: $(BOARD)
- @echo Clock: $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
- @echo --------------------------------------
-
# Display compiler version information.
gccversion :
@$(CC) --version
-
# Program the device.
program: $(TARGET).hex $(TARGET).eep
$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
+flip: $(TARGET).hex
+ batchisp -hardware usb -device $(MCU) -operation erase f
+ batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+
+dfu: $(TARGET).hex
+ dfu-programmer $(MCU) erase
+ dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+ dfu-programmer $(MCU) reset
+
+flip-ee: $(TARGET).hex $(TARGET).eep
+ $(COPY) $(TARGET).eep $(TARGET)eep.hex
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase
+ batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program
+ batchisp -hardware usb -device $(MCU) -operation start reset 0
+ $(REMOVE) $(TARGET)eep.hex
+
+dfu-ee: $(TARGET).hex $(TARGET).eep
+ dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+ dfu-programmer $(MCU) reset
+
# Generate avr-gdb config/init file which does the following:
# define the reset signal, load the target file, connect to target, and set
%.hex: %.elf
@echo
@echo $(MSG_FLASH) $@
- $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+ $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
%.eep: %.elf
@echo
%.lss: %.elf
@echo
@echo $(MSG_EXTENDED_LISTING) $@
- $(OBJDUMP) -h -z -S $< > $@
+ $(OBJDUMP) -h -S -z $< > $@
# Create a symbol table from ELF output file.
%.sym: %.elf
# Create preprocessed source for use in sending a bug report.
%.i : %.c
$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
-
+
# Target: clean project.
-clean: begin clean_list clean_binary end
+clean: begin clean_list end
-clean_binary:
- $(REMOVE) $(TARGET).hex
-
-clean_list:
+clean_list :
+ @echo
@echo $(MSG_CLEANING)
+ $(REMOVE) $(TARGET).hex
$(REMOVE) $(TARGET).eep
- $(REMOVE) $(TARGET)eep.hex
$(REMOVE) $(TARGET).cof
$(REMOVE) $(TARGET).elf
$(REMOVE) $(TARGET).map
$(REMOVE) $(SRC:.c=.s)
$(REMOVE) $(SRC:.c=.d)
$(REMOVE) $(SRC:.c=.i)
- $(REMOVE) InvalidEvents.tmp
$(REMOVEDIR) .dep
doxygen:
# Listing of phony targets.
-.PHONY : all showliboptions showtarget begin \
-finish end sizebefore sizeafter gccversion build \
-elf hex eep lss sym coff extcoff program dfu flip \
-flip-ee dfu-ee clean debug clean_list clean_binary \
-clean_doxygen gdb-config doxygen
\ No newline at end of file
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
+debug gdb-config
projects / pub / USBasp.git / blobdiff