# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
-# This will be an integer division of F_CLOCK below, as it is sourced by
-# F_CLOCK after it has run through any CPU prescalers. Note that this value
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
# Input clock frequency.
-# This will define a symbol, F_CLOCK, in all source code files equal to the
+# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_CLOCK = $(F_CPU)
+F_USB = $(F_CPU)
# Output format. (can be srec, ihex, binary)
# LUFA library compile-time options and predefined tokens
-LUFA_OPTS = -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D INTERRUPT_CONTROL_ENDPOINT
-
-LUFA_OPTS += -D ENABLE_DHCP_CLIENT
-LUFA_OPTS += -D ENABLE_TELNET_SERVER
-LUFA_OPTS += -D MAX_URI_LENGTH=50
-LUFA_OPTS += -D UIP_CONF_UDP="defined(ENABLE_DHCP_CLIENT)"
-LUFA_OPTS += -D UIP_CONF_TCP=1
-LUFA_OPTS += -D UIP_CONF_UDP_CONNS=1
-LUFA_OPTS += -D UIP_CONF_MAX_CONNECTIONS=3
-LUFA_OPTS += -D UIP_CONF_MAX_LISTENPORTS=5
-LUFA_OPTS += -D UIP_URGDATA=0
-LUFA_OPTS += -D UIP_CONF_BUFFER_SIZE=1514
-LUFA_OPTS += -D UIP_ARCH_CHKSUM=0
-LUFA_OPTS += -D UIP_CONF_LL_802154=0
-LUFA_OPTS += -D UIP_CONF_LL_80211=0
-LUFA_OPTS += -D UIP_CONF_ROUTER=0
-LUFA_OPTS += -D UIP_CONF_ICMP6=0
-LUFA_OPTS += -D UIP_ARCH_ADD32=0
-LUFA_OPTS += -D UIP_CONF_ICMP_DEST_UNREACH=1
-LUFA_OPTS += -D UIP_NEIGHBOR_CONF_ADDRTYPE=0
+LUFA_OPTS = -D USE_LUFA_CONFIG_HEADER
# Create the LUFA source path variables by including the LUFA root makefile
Lib/SCSI.c \
Lib/DataflashManager.c \
Lib/uIPManagement.c \
+ Lib/DHCPCommon.c \
Lib/DHCPClientApp.c \
+ Lib/DHCPServerApp.c \
Lib/HTTPServerApp.c \
Lib/TELNETServerApp.c \
Lib/uip/uip.c \
# Each directory must be seperated by a space.
# Use forward slashes for directory separators.
# For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/ Lib/uip/ Lib/uip/conf/ Lib/FATFs/
# Compiler flag to set the C Standard level.
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL
-CDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CDEFS += -DF_USB=$(F_USB)UL
CDEFS += -DBOARD=BOARD_$(BOARD) -DARCH=ARCH_$(ARCH)
CDEFS += $(LUFA_OPTS)
# Place -D or -U options here for ASM sources
ADEFS = -DF_CPU=$(F_CPU)
-ADEFS += -DF_CLOCK=$(F_CLOCK)UL
+ADEFS += -DF_USB=$(F_USB)UL
ADEFS += -DBOARD=BOARD_$(BOARD)
ADEFS += $(LUFA_OPTS)
# Place -D or -U options here for C++ sources
CPPDEFS = -DF_CPU=$(F_CPU)UL
-CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CPPDEFS += -DF_USB=$(F_USB)UL
CPPDEFS += -DBOARD=BOARD_$(BOARD)
CPPDEFS += $(LUFA_OPTS)
#CPPDEFS += -D__STDC_LIMIT_MACROS
CFLAGS += -fpack-struct
CFLAGS += -fshort-enums
CFLAGS += -fno-strict-aliasing
+CFLAGS += -fno-split-wide-types
CFLAGS += -Wall
CFLAGS += -Wstrict-prototypes
#CFLAGS += -mshort-calls
$(REMOVEDIR) .dep
doxygen:
- @echo Generating Project Documentation...
- @doxygen Doxygen.conf
+ @echo Generating Project Documentation \($(TARGET)\)...
+ @if ( doxygen Doxygen.conf 2>&1 | grep -v "warning: ignoring unsupported tag" ;); then \
+ exit 1; \
+ fi;
@echo Documentation Generation Complete.
clean_doxygen:
rm -rf Documentation
+checksource:
+ @for f in $(SRC) $(CPPSRC) $(ASRC); do \
+ if [ -f $$f ]; then \
+ echo "Found Source File: $$f" ; \
+ else \
+ echo "Source File Not Found: $$f" ; \
+ fi; done
+
+
# Create object files directory
$(shell mkdir $(OBJDIR) 2>/dev/null)
.PHONY : all begin finish end sizebefore sizeafter gccversion \
build elf hex eep lss sym coff extcoff doxygen clean \
clean_list clean_doxygen program dfu flip flip-ee dfu-ee \
-debug gdb-config
-
+debug gdb-config checksource
projects / pub / USBasp.git / blobdiff