Fixed MIDI class driver send routines silently discarding packets if the endpoint...

[pub/USBasp.git] / Projects / XPLAINBridge / Lib / SoftUART.c

diff --git a/Projects/XPLAINBridge/Lib/SoftUART.c b/Projects/XPLAINBridge/Lib/SoftUART.c
index 5de3659..4b38a0b 100644 (file)
--- a/Projects/XPLAINBridge/Lib/SoftUART.c
+++ b/Projects/XPLAINBridge/Lib/SoftUART.c
@@ -67,7 +67,7 @@ void SoftUART_Init(void)
        SoftUART_SetBaud(9600);
 
        /* Setup reception timer compare ISR */
-       TIMSK2 = (1 << ICIE2);
+       TIMSK1 = (1 << ICIE1);
 
        /* Setup transmission timer compare ISR and start the timer */
        TIMSK3 = (1 << ICIE3);
@@ -81,7 +81,7 @@ ISR(INT0_vect, ISR_BLOCK)
        RX_BitsRemaining = 8;
 
        /* Reset the bit reception timer */
-       TCNT2 = 0;
+       TCNT1 = 0;
 
        /* Check to see that the pin is still low (prevents glitches from starting a frame reception) */
        if (!(SRXPIN & (1 << SRX)))
@@ -90,12 +90,12 @@ ISR(INT0_vect, ISR_BLOCK)
                EIMSK = 0;
 
                /* Start the reception timer */
-               TCCR2B = ((1 << CS20) | (1 << WGM23) | (1 << WGM22));
+               TCCR1B = ((1 << CS10) | (1 << WGM13) | (1 << WGM12));
        }
 }
 
 /** ISR to manage the reception of bits to the software UART. */
-ISR(TIMER2_CAPT_vect, ISR_BLOCK)
+ISR(TIMER1_CAPT_vect, ISR_BLOCK)
 {
        /* Cache the current RX pin value for later checking */
        uint8_t SRX_Cached = (SRXPIN & (1 << SRX));
@@ -114,7 +114,7 @@ ISR(TIMER2_CAPT_vect, ISR_BLOCK)
        else
        {
                /* Disable the reception timer as all data has now been received, re-enable start bit detection ISR */
-               TCCR2B = 0;
+               TCCR1B = 0;
                EIFR   = (1 << INTF0);
                EIMSK  = (1 << INT0);